submitted / available | |||||||
---|---|---|---|---|---|---|---|
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
Test Report | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
|
External Photos | External Photos | 528.39 KiB | ||||
ID Label/Location Info | |||||||
ID Label/Location Info | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-12-16 | 902.1375 ~ 904.6625 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
2 | 2019-11-19 | 920.1375 ~ 922.6625 | DSS - Part 15 Spread Spectrum Transmitter | Change in Identification |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2019-12-16
|
|||||
2019-11-19
|
||||||
Applicant's complete, legal business name |
Woodstream Corporation
|
|||||
FCC Registration Number (FRN) |
0008874893
|
|||||
Physical Address |
69 N. Locust St.
|
|||||
Lititz, PA
|
||||||
United States
|
||||||
TCB Information | ||||||
TCB Application Email Address |
h******@acbcert.com
|
|||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
FCC ID | ||||||
Grantee Code |
SNA
|
|||||
Equipment Product Code |
SFM11R2D
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
D**** A****
|
|||||
Telephone Number |
71774******** Extension:
|
|||||
Fax Number |
(717)********
|
|||||
d******@woodstream.com
|
||||||
Technical Contact | ||||||
Firm Name |
BEC Incorporated
|
|||||
Name |
S****** F****
|
|||||
Physical Address |
970 East High Street
|
|||||
Pottstown, 19464
|
||||||
United States
|
||||||
Telephone Number |
16109********
|
|||||
s******@bec-ccl.com
|
||||||
Non Technical Contact | ||||||
n/a | ||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/13/2020 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | |||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SigFox Radio Module | |||||
SigFox Module | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Limited Single Modular Approval | |||||
Purpose / Application is for | Class II Permissive Change | |||||
Change in Identification | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Grant Comments | Power output is conducted. Limited Single Module Approval. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. End-User must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrator must ensure that the end use has no access to the antennas/connectors and has no manual instructions to remove or install this module. The change filed under this application reflect the use of a different antenna with matching circuit (matching components are part of antenna and no changes have been made to the module internally) replacing the original device antenna. No other changes were made to the radio from when it was tested under the original grant. Also note that this version of the device is locked via firmware to only operate in the 902.1375 - 904.6625MHz band and not the 920.1375 - 922.6625MHz band. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. | |||||
Change in ID. Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-User must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end use has no access to the antennas/connectors and has no manual instructions to remove or install this module. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
BEC Incorporated
|
|||||
HCT Co., Ltd.
|
||||||
Name |
S**** F********
|
|||||
L******** Y******
|
||||||
Telephone Number |
610-9********
|
|||||
82-31********
|
||||||
Fax Number |
610 9********
|
|||||
82-31********
|
||||||
s******@bec-ccl.com
|
||||||
y******@hct.co.kr
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 902.13750000 | 904.66250000 | 0.2053000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 902.1375 | 904.6625 | 0.205 | ||||||||||||||||||||||||||||||||||||
2 | 2 | 15C | 920.1375 | 922.6625 | 0.188 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC