FCC ID: 2AUIUWVODB1A BASE STATION

1 2 5 GET BETTER SECURITY WITH Record Full-Length Videos Get unlimited full-length video recordings. Smart AI Detection Detect people, packages, vehicles, and more. Back-to-Back Event Recording Capture everything without 5-minute gaps. Exclusive Discounts Get exclusive discounts on Wyze products. Subscribe or learn more at services.wyze.com. IN THE BOX Wyze Cam Outdoor v2 1 Wyze Base Station 1 Base Station Power Adapter 1 Base Station Ethernet Cable 1 USB Charging Cable 1 Screw Assembly 1 Quick Start Guide 1 CONTAINS A LITHIUM ION BATTERY Do not replace the battery in your Wyze Cam Outdoor. Do not use any battery other than the one that came in your Wyze Cam Outdoor. Use of a replacement battery may cause the product to overheat, catch fire, or explode, which could result in serious personal injury, death, or damage to nearby property. Do not improperly dispose or discard. Lithium-ion batteries should be recycled. For information on how you can recycle the product at no cost, visit wyze.com/recycle. Micro SD SYNC RESET 1 3 4 RIGHT LEFT FRONT 1 2 3 4 5 6 7 6 7 Power LAN BACK TOP SYNC Button MicroSD Slot

(MicroSD card not included) 7 SYNC Micro SD Reset BOTTOM USB Charging Port Power Input LAN Port Status Light Removable Magnetic Mounting Base 2 3 8 9 5 OPEN 6 4 BACK Power Adapter Camera Charging USB Cable WALL MOUNT 1 2 3 4 5 6 7 8 9 Light Sensor Lens Microphone Ethernet Cable Screw Assembly CEILING MOUNT Removable Magnetic Mounting Base On/Off Switch USB Charging Port SETUP 1 Download the Wyze app and sign in or create an account. Status Light SYNC Button MicroSD Slot

(MicroSD card not included) Mounting Holes 2 Open the Wyze app and tap the + sign in the top left corner of the Home tab. Follow the in-app instructions to set up the base station and camera. 3 Follow the along in the app to mount the camera. Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary. WYZE STATUS LIGHT GUIDE PRECAUTIONS WYZE BASE STATION Solid yellow light The device is powered on and initializing Flashing yellow and blue lights The device is pairing with the camera Flashing blue light The device is connecting to the network Solid blue light The device is working properly WYZE CAM OUTDOOR Solid yellow light The device is powered on and initializing Flashing yellow and blue lights The device is pairing with the base station Flashing blue light The device is connecting to the network Solid blue light The device is working properly Flashing red light The device is charging Solid red light The device is fully charged No indicator light The device is powered off or asleep Prolonged direct sunlight can heat the inside of your camera past its maximum operating temperature of 122F (50C). Avoid directly sunlight where possible and only use your camera in environments within its operating temperature range: -4 to 122F (-20 to 50C). To charge your camera, plug the included micro USB cable into the USB port on your base station and connect it to your camera. Or use a power adapter and cable that will provide 5V/2A power. FCC WARNING Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISED RADIATION EXPOSURE STATEMENT This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet appareil est conforme aux limites d'exposition de rayonnement RF ISED tablies pour un environnement non contrl. Cet metteur ne doit pas tre co-implant ou fonctionner en conjonction avec toute autre antenne ou transmetteur. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur & votre corps. Tous changements ou modifications non expressment approuvs par la partie responsable de la conformit peut annuler l'autorit de l'utilisateur oprer l'quipement. ISED RSS WARNING This device complies with ISED licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire d'interfrence, et

(2) l'appareil doit accepter tout interfrence radiolectrique subi, mme si l'interfrence est susceptible d'en compromettre le fonctionnement. WARRANTY INFORMATION Your Wyze product is covered by a one-year limited warranty. You can view the limited warranty terms at https://wyze.com/return-warranty-policy or request a copy by contacting Wyze at +1 (206) 339-9646. Apple logo and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Google Assistant, Google Home, Google Play, and the Google Play logo are trademarks of Google LLC. NEED HELP?

Contact our Support Team:

https://wyze.com/support Join the Community:

https://wyze.com/community Scan the QR code to learn more

:WVODV2B1

:WVODV2B1-

KSZP01 V1.0 Wyze and Wyze Cam Outdoor v2 are trademarks of Wyze Labs, Inc.

UPC:

2 CMYK 105g 55*100mm56

BASE STATION Model: WVODB1 12V 1A FCC ID: 2AUIUWVODB1A IC: 25466-WVODB1A HVIN: WVODB1A MAC: XX:XX:XX:XX:XX:XX WYZE LABS, Inc. Made in China 1. MAC 2.9*9mmMAC||

2C:AA:8E:33:54:79|NCUS0001|WVODB1 510M 7pt 508R 6pt V4.0 FCC,IC V2.0 V4.0

: 180642B-1 Beijing Yinghao Technology Co.,Ltd 3808 010-56014440 wangbinghao@tjystx.com 1 4 Electrical parameters Frequency Impedance S.W.R. Gain Max Input Power 2

.40~2.50GHZ 5 0 2.0 (FOR ) 3 dBi 5 W Mechanical parameters PCB SPEC PCB Cable Spec Packaging requirements FR4 79.5*6.20*0.6mm 1.13 :

PE

/Operating/ Storage Temperature Operating Temperature 40~75

Storage Temperature 40~75

2 4 5

.1 VSWR 5.2&

Frequency (MHz) Efficiency(%) Peak Gain(dBi) 3.51 3.24 3.03 3.12 3.31 3.22 3.21 3.21 3.36 3.43 3.21 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 68.63 68.84 67.14 66.90 67.12 65.43 65.16 63.35 65.37 66.57 64.36 4 4

Wyze Labs, Inc. 5808 Lake Washington Blvd NE Ste 300 Kirkland, WA98033, United States DATE : Aug. 15, 2022 Wyze Labs, Inc. 5808 Lake Washington Blvd NE Ste 300 Kirkland, WA 98033, United States Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint below company and person:

Name Position Company Name Tianjin Dongdian Testing Service Co., Ltd. Address Leon Li RF Manager Tel / Fax E-Mail Building D-1, No. 19, Weisi Road, Microelectronics Industrial Park Development Area, Tianjin, China. Tel: +86-22-58038033 ming.li@dgddt.com to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by CETECOM GmbH, still resides with:

Applicant name Wyze Labs, Inc. Address 5808 Lake Washington Blvd NE Ste 300 Kirkland, WA 98033, United States Yours sincerely, Signatory Name Position Company Name Wyze Labs, Inc. Address Roy Zhang Certification Senior Manage Tel / Fax E-Mail 5808 Lake Washington Blvd NE Ste 300 Kirkland, WA 98033, United States

+86 17600404714 roy.zhang@wyze.cn

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<08/15/2022>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b) (4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AUIUWVODB1A Model name WVODB1 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions Short-Term Confidentiality Days 180 days 180 days 180 days 180 days The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

(Signed) Name: Roy Zhang Company: Wyze Labs, Inc. Address: 5808 Lake Washington Blvd NE Ste 300 Kirkland, WA 98033, United States Phone: +86 17600404714 Fax:

E-Mail: roy.zhang@wyze.cn

< Wyze Labs, Inc.>

<5808 Lake Washington Blvd NE Ste 300 Kirkland, WA98033, United States >

Date: 2022/08/15 FCC ID: 2AUIUWVODB1A Model Number: WVODB1 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Wyze Labs, Inc. declare that this EUT (FCC ID: 2AUIUWVODB1A) doesnt have Ad Hoc mode function on on-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: Roy Zhang/ Certification Senior Manager Company: Wyze Labs, Inc. Address: 5808 Lake Washington Blvd NE Ste 300 Kirkland, WA 98033, United States Tel: +86 17600404714 Fax:

E-Mail: roy.zhang@wyze.cn