FCC ID: 2AJEO-S33 Bluetooth Earbuds

85*85 mm 105g+

Padmate S33 1. (

2. () Type-C Padmate S33 2 2

5 3 1.5V/2A 2.0~453 3.2 4. 5. 6. 7. 8. 9.() 10. E-mail 1. 2. 3. 4. 13006 GB4943.1-2011 400 885 1068 www.padmate.cn How to power on 1. Take out the earphones from charging case, they will start up automatically and enter the pairing mode (make sure the charging case is charged). 2. Touch the button of the earphone to turn it on (the earphones must not be in the charging case and must be o). Left ear touch area Charging case Type-C charging port Right ear touch area Battery level indicator Operating Instructions First use: Power on - Turn on the phone settings - Bluetooth - Padmate S33 Touch Button Click Touch Left Ear Play/Pause Right Ear Play/Pause Click Touch (Call Status) Answer Call/Call Rejection Answer Call/Call Rejection Double-click Three strikes Volume-

Previous song Long press for 2 seconds Voice Assistant Long press for 2 seconds

(incoming call status) Call rejection Volume+

Next Voice Assistant Call rejection Battery life: About 5 hours Mobile charging: About 3 times Warm tips and safety information FCC Warning Dear users, please carefully read and observe the following precautions before using and operating the device:

1. Please fully charge the device before using, and do not use a charger with output higher than 5V/2A when charging. 2. Please use this product in the temperature range of 0~45. If the product is not used for a long time, please charge it within 3 months to ensure good battery performance. 3. After wearing the product for exercise, it is recommended to clean the sweat and water stains on the surface of the product with a dry towel, and let it dry for 2 hours. Please make sure that the charging port is dry before charging the earphones, so as to prevent short circuit caused by sweat from aecting the service life of the product during charging. 4. This product contains batteries. Do not throw, press, disassemble or immerse the product in water. Keep it away from re, water and high voltage equipment. Do not continue to use the product if it is overheated, dropped or damaged, or falls into liquid. 5. Prolonged exposure to high volume may cause permanent hearing loss, and the minimum volume required is recommended. 6. Please stop wearing the product and consult your doctor if you have skin discomfort or your ears are buzzing. 7. If you are tted with a pacemaker or other electronic medical device, please consult your doctor before using this product. 8. Keep the product out of reach of children. Swallowing the product or the packaging bag and the small parts may cause suocation. 9. Please observe all signs and instructions that require you to turn o electronic devices or RF radio products in designated locations such as hospitals or airplanes. 10. Please observe the trac safety and local laws when using this product. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For more instructions and safety information, please visit this QR code Padmate Warranty Card

(Please keep this card as proof) Product Series No. Purchase Stamp E-mail Customer Name Phone No. Product Model Address Date of Purchase Notice:

1. Please ll out the form above with purchase stamp for the procedure of warranty. 2. Any change on warranty card and invoice will result in invalidation. 3. Please keep warranty card and invoice as the proof of warranty for the product. No replacement for warranty card or invoice. 4. This warranty is valid within 1 year from the date of purchase. ModelS33 FCC ID: 2AJEO-S33 Input5V 400mA Capacity400mAh/1.48Wh Made in China Created by Padmate in Xiamen, China Xiamen Padmate Technology Co.,LTD Add:RM 201, Huli Park No.37, Industrial Zone, Tong'an District, Xiamen, China. www.padmate-tech.com www.facebook.com/PadmateTech/

C5266091_X24_Ed.1 Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization Applicant Company name: Xiamen Padmate Technology Co., Ltd. Grantee code: 2AJEO 2AJEO-S33 FCC ID:

Xiaoming Wu Contact Name:

RM 201, Huli Park No.37, Industrial Zone, Tong'an District, Xiamen, China. Address:

+86 592 5919800 Telephone No:

Fax No:

+86 592 5915300 Email: wxm@padmate.cn i. ii.

[Xiamen Padmate Technology Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Xiamen Padmate Technology Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification. Date: 2.15.2023 Applicants Name: Xiaoming Wu Title:

Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

C5266091_X10_Ed.1 Xiamen Padmate Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AJEO-S33 To Whom It May Concern, Date: 2/3/2023 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No Short-Term Confidentiality No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Xiaoming Wu Date: 2/3/2023 Title:

1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Xiamen Padmate Technology Co., LTD Address: RM 201, Huli Park No.37, Industrial Zone, Tong'an District, Xiamen, China Product Name: Bluetooth Earbuds Model Number: S33 FCC Identifier: 2AJEO-S33 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Xiaoming Wu Date: 2/3/2023 Title:

Signature of applicant:

1/1

C5266091_X23_Ed.1 US AGENT LETTER OF ATTESTATION US Agent:

Company Name: PADMATE INTERNATIONAL LLC LIANHUA MAO Contact Name:

160 W Santa Clara St Ste 600 SAN JOSE, CA 95113 Address:

0086-13606901248 Telephone No:

Fax No:

Email:

mlh@padmate.cn TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 This letter is to confirm that we have accepted the responsibility to act as US agent representative on behalf of the (Xiamen Padmate Technology Co., Ltd.) noted below for all future FCC certification/registrations obtained during the period of this agreement, which ends at the specified date below. As per US agent, we are aware of the requirements involved as outlined in FCC Equipment Authorization Program in their Report and Order FCC 22-84 and the clause 2.911 Application requirements. Applicant Company name: Xiamen Padmate Technology Co., Ltd. Grantee code: 2AJEO FCC ID:

Contact Name:

Address:

Telephone No:

Fax No:

Email:

2AJEO-S33 Xiaoming Wu RM 201, Huli Park No.37, Industrial Zone, Tong'an District, Xiamen, China.

+86 592 5919800

+86 592 5915300 wxm@padmate.cn The Applicant acknowledge the acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Date: 2.15.2023 Applicants Name: Xiaoming Wu US Agents Name: LIANHUA MAO Title:

Signature Title: Compliance President Signature 1/1