YB2530+PA+LNA Wireless Module V2.0 HongKong CCD Limited General description The YB2530+PA+LNA Wireless Modle is a low-power,hightly integrated 2.4GHz transcevier that suitable for systems targeting compliance with worldwide radio-frequency. Its a true system-on-chip solution for 2.4-GHz IEEE802.15.4, ZigBee and RF4CE applications. Features
2.4-GHz IEEE802.15.4 compliant RF transceiver
Programmable output power up to 8dBm
Accurate digital RSSI/LQI support
Suitable for systems targeting compliance with wordwide radio-frequency
Data rate: 250kbps
256KB in-system programmable flash Two 128 bytes FIFO for TX & RX buffer
CSMA/CA hardware support
Battery monitor and temperature sensor
AES security coprocessor
8KB RAM with retention in all power mode
32-kHz sleep timer with capture
Wide Supply-Voltage Range (2 V3.6 V) Applications
2.4-GHz IEEE 802.15.4 systems
RF4CE remote control systems (64-KB flash and higher)
AMR Automatic Meter Reading
Two-way RKE Remote Keyless Entry
Home and building automation
Wireless alarm and security systems
Wireless Light Dimming
Wireless sensor networks Industrial monitoring and control working with PCB antenna 1 working with outside antenna Electrical Characteristics ITEM TEST REQUIREMENT REMARKS DC 2.03.6V 24052480MHz 50KHz O-QPSK 0-20dBm Programmable Programmable
<32mA
-116dBm Voltage supply Center frequency Frequency error Modulation Output power Receiving sensitivity Receiving current Transmitting current Sleep consumption 0.4mA Data rate 250kbps Transmit distance Antenna Store temperature Operation temperature Package size 23.2*34mm 1000M 50ohm
-40125C
-2085C 160mA
@250Kbps data rate Po=20dBm Power Mode 1 At open area Base on crystal performance Ta = 25C, VCC = 3.3V Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacture. 2 Dimensions and Layout size Controlling the RF PA The two digital control pins (
PAEN,LNAEN
) have functional as below, CC2530 P1.1 Connect to PAEN of the PA chip CC2530 P1.4 Connect to LNAEN of the PA chip
Transmit mode PAEN logic 1, LNAEN logic 0 Receive mode PAEN logic 0,LNAEN logic 1 Idle mode PAEN logic 0,LNAEN logic 0 Design References 1. Texas Instruments Low-Power RF Web site has all our latest products, application and design notes, FAQ section news and events updates, and much more. Just go to www.ti.com/lprf. 2. IEEE Std. 802.15.4-2006: Wireless Medium Access Control (MAC) and Physical Layer
(PHY) Specifications http://standards.ieee.org/getieee802/download/802.15.4-2006.pdf 3. For IAR software,demo code,docments etc. over 700MB files,more than 300 members 4 in QQ group 255430047. TYWE1SDATASHEET RegulatoryinformationfortheOEMsandIntegrators TheguidelinesdescribedwithinthisdocumentareprovidedtoOEMintegratorsinstallingAmplified ZigbeemoduleinnotebookandtabletPChostplatforms.Adherencetotheserequirementsisnecessary tomeettheconditionsofcompliancewithFCCrules,includingRFexposure.Whenallantennatypeand placementguidelinesdescribedhereinarefulfilledtheAmplifiedZigbeemodulemaybeincorporated intonotebookandtabletPChostplatformswithnofurtherrestrictions.Ifanyoftheguidelinesdescribed hereinarenotsatisfieditmaybenecessaryfortheOEMorintegratortoperformadditionaltesting and/orobtainadditionalapproval.TheOEMorintegratorisresponsibletodeterminetherequiredhost regulatorytestingand/orobtainingtherequiredhostapprovalsforcompliance
.AmplifiedZigbeemoduleareintendedforOEMsandhostintegratorsonly. TheAmplifiedZigbeemodulemustbeoperatedwithanaccesspointthathasbeenapprovedforthe countryofoperation. ChangesormodificationtoAmplifiedZigbeemodulebyOEMs,integratorsorotherthirdpartiesisnot permitted.AnychangesormodificationtoAmplifiedZigbeemodulebyOEMs,integratorsorotherthird partieswillvoidauthorizationtooperate InformationtoBeSuppliedtotheEndUserbytheOEMorIntegrator Thefollowingregulatoryandsafetynoticesmustbepublishedindocumentationsuppliedtotheenduser oftheproductorsystemincorporatingtheAmplifiedZigbeemodule,incompliancewithlocalregulations. Hostsystemmustbelabeledwith"ContainsFCCID: 2AHI9YB2530",FCCIDdisplayedonlabel. TheAmplifiedZigbeemodulemustbeinstalledandusedinstrictaccordancewiththemanufacturer's instructionsasdescribedintheuserdocumentationthatcomeswiththeproduct.IntelCorporationisnot responsibleforanyradioortelevisioninterferencecausedbyunauthorizedmodificationofthedevices includedwiththewirelessadapterkitorthesubstitutionorattachmentofconnectingcablesand equipmentotherthanthatspecifiedbyIntelCorporation.Thecorrectionofinterferencecausedbysuch unauthorizedmodification,substitutionorattachmentistheresponsibilityoftheuser.IntelCorporation andauthorizedresellersordistributorsarenotliableforanydamageorviolationofgovernment regulationsthatmayarisefromtheuserfailingtocomplywiththeseguidelines. ThisdevicehasbeenevaluatedandshowncompliantwiththeFCCRFExposurelimitsunderfixed exposureconditions(antennasaregreaterthan20cmfromapersonsbody)wheninstalledincertain specificconfigurations. Thehostsystemshallhavealabelshowing:ContainsFCCID:2AHI9YB2530 WhentheuserselectsU.FLRFconnectorantenna,itrequirestheacompletetheantenna.thekind ofantennathatuserscanbeuse:2.4GRFantennaU.FL.RFconnector(antennatype:FPCantenna, Integralantenna
(Thegainofantenna:2.0dBi) TYWE1SDATASHEET FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. The final end product must be labelled in a visible area with the following:
Contains Transmitter Module 2AHI9YB2530