C-001D Rental houses (rooms) smart lock User Manual

 

1....................1 2............................ .........2-3 3 ...............................3 4 ...............................................4-6 6 ...............................................7 1 C-001D 40mm----100mm 15KV 3.6--5V 135mA 10uA

-20----70 10 7 2 5 1 APP APP APP +

1.1

1.2

, 2 2.1

3 2.2

3 3.1

3.2

4 4.1 4.1.1 app app app app 4.1.2 app app 4.2 4.2.1 4.2.2 app 4.2.3 app app 5 5.1 app app 5.2 6 APP

7

APP

APP , 5 8 +

8 APP 9:

3.6v 10:

5 ( ) 3 11 17 7 2 215 15 2 3 4 l . 5 l. 2(

)() 3. 4 Part 1: Introduction to product parameters Name: Smart lock cylinder Model: C-001D Security level: top level Adapt to door type: security door, wooden door, glass door Adapt to the door thickness: 40mm----100mm Electrostatic protection: 15KV Power input: 3.6--5V Current: Operating current <135mA Standby current <10uA Working temperature: -20----70C Resistance to pressure: 100,000 times Part 2: product composition Product settings:

Instructions for use:

Please make sure that the mobile phone Blueto oth is turned on before the following operations, and the mobile phone and the door lock are within a reasonable distance. It is recommended to operate within 5 meters. 1, APP connection:

Search for "tuya" app in the app market and do wnload Open the app and follow the prompts to register. Click on the "+" icon in the upper right corner o f the homepage. 1.1. Manually add: Click Security SensingDoor Lock (Bluetooth) - Confirm that you have heard t he voice broadcast on the left. Press the button on the device to turn on the device side Blu etooth , After waiting for a few seconds, the dev ice name appears and click Connect. 1.2, automatic discovery: Click on the "automatic discovery" above, to ensure that the lock has be en powered normally, Press the button on the device to turn on the device side Bluetooth , w ait a few seconds, the device name appears, click on the connection. 2, fingerprint management 2.1. Add fingerprint: Click the home device name, enter the management interface, click Settings-fi ngerprint management-upper right corner+number-

add fingerprint, select the user, click Start to co llect, enter 3 fingerprints according to the prom pt, pop up after successful entry "Fingerprint na ming", enter the name, and add successfully. 2.2. Delete the fingerprint: Click the home device, enter the management interface, click Fingerpri nt-fingerprint management, click the icon on the right side of the fingerprint you have deleted. 3, password management 3.1. Add password: After clicking the home devic e, enter the management interface, click Settings

-Password Management - Add the password in th e upper right corner + No., select the user, ente r the password and nickname according to the pr ompt on the page, click Save in the upper right corner, and add successfully. 3.2. Delete password: After clicking the home dev ice, enter the management interface, click Settin gs-Password Management, click the icon on the right to delete. 4, member management 4.1, member management page - two different m embers 4.1.1. Family members - These members are cons istent with the users of the family group in the app; new users are added to the app family gro up, and a family member is also present in the door lock members. In the same way, a family m ember is added to the family member of the do or lock, and the member will also appear in the family group of the app. Note: Deleting a family member can only be done in the family membe r management of the app. 4.1.2. Other members - refers to users who appe ar only in the door lock, not users of the app fa mily group. Adding and deleting such users will n ot affect the members of the app family group. 4.2, member management - other member mana gement 4.2.1. Validity period: the administrator can decid e other members The length of use of the validity period. Can be set to be permanent or set to the specified start time - end time 4.2.2, open the door. The administrator can deter mine the type of permission that the member ha s to open the door; if the administrator closes al l the opening rights of the member, the user can no longer maintain the door opening mode thro ugh the app, and can only use the existing door opening mode. 4.2.3. After creating another member, the adminis trator can associate the member with a user of t he app through the Share operation. At the sp ecified end time of the user, the user's app will automatically lose the device. 5, restore factory settings Click the home device, enter the management int erface, click the icon in the upper right corner, e nter the interface, pull down to find the factory reset, click 5.1. When the mobile phone app and the door l ock are in Bluetooth connection state, use the fa ctory reset operation. All the door opening meth ods of the door lock will be deleted, the door lo ck will be restored to the factory default state, a nd other users can re-add the door lock through the app. 5.2. When the mobile phone is not in Bluetooth connection with the door lock, the door lock is r estored to the factory setting operation on the d oor lock. The way the door is opened on the do or lock remains unaffected. 6, Language settings:

Open the app, click on the home device, enter t he management interface, and click "Settings -

L anguage" to switch the language. 7, Open the door operation:

Press any key on the keyboard once, after lighting the keyboard light, enter the password +

, verify the passage, the door lock is open, the blue light is on, after the door opening time, the door lock is closed and the blue light is off. Press the fingerprint, verify the pass, the door lock is open, the blue light is on, after the door opening time, the door lock is closed and the blue light is off. Open the APP homepage, select the device, enter the management interface, click "Mobile phone open -

OK", unlock successfully. Open the APP homepage, select the device, enter the management interface, left to switch to the "Dynamic Password" interface, click "Click to get" to generate a dynamic password, valid within 5 minutes after the dynamic password is generated. Enter the 8-digit number + on the lock button, and the unlock is successful. 8, open the door record query Open the APP home page, select the device to enter the management interface, click "Open the door record" below to view the opening record. 9, Low battery alarm:

Voice prompt below 3.6v: Please replace the battery if the battery power is low 10, Enter the error lock:

Enter fingerprint error 3 times in succession. The screen displays: The illegal operating system is locked, and the system cannot be operated for 3 minutes. 11, t he button light is off After the button is pressed, the light is on for ten seconds without operation and automatically exits the operating system, and the light is off. Press the Back button to exit the system and the light will go out. After-sales warranty:

1, 7 days no reason to return: from the product sold within 7 days. The product can be selected unconditionally returned without affecting second times sale. 2, 15 days replacement period: 15 days from the sale of the product. The product can be exchanged for the same product without affecting the second times sale. 3. Within the validity period of the three guarantees. Warranty twice if there is a product that still does not work properly. With repair records and certification. The salesperson will exchange the same model or the same product or return the product for the consumer free of charge. 4, product warranty period is 1 year. 5, post-sale postage: during the warranty period, the cost of the product mailing is borne by each. Not covered by the warranty:

1. Product damage due to improper operation or mistakes. After the product the test maintenance personnel charge the corresponding cost according to the labor cost and the spare part cost. true, is 2, Due to irresistible factors: lightning strikes (frontal attacks lead to equipment burned, deformed) flooding (long-term soaking water detected product damage). 3. Warrants who cannot provide valid orders, receipts, and invoice vouchers. 4. beyond the warranty period, and spare parts are required for irresistible damage to the product during the warranty period. A manual service fee plus spare parts fee is required. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful this device interference, and (2) that may interference must accept any interference received, including cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body. Product after-sales warranty:

Product number:

Serial number:

Date of purchase:

Customer Name:

Customer phone number:

contact address:

Maintenance records Repair date Causeof the malfunction Repair content Signature of maintenance personnel