Weight Scale Setup 1. Battery Activation or Installation 2. Weight Unit Conversion are plastic pull tab are back of the scale as shown and install the batteries according in the battery case. polarity mark to the The unit conversion button is at the bottom of scale. ess and it be displayed on LED
. UNIT BUTTON Note:
There are KG and LB units on the scale, no ST: LB unit;
There are ST: LB unit in the App. When App is converted to ST: LB unit, the scale is not synchronized with the App. 1. Tap Start then the app will guide you through the setup process, save the data when you are done. 2. Add the Weight Scale device Add Device Open the MovingLife app, tap Me at the bottom of the screen, tap Settings, then enable share data with Apple Health or Google Fit. It can share data with Fitbit App too. 1) iOS Note: In case you missed setup sharing data with Apple Health, Google Fit, or Fitbit. 4. Store data on cloud - not recommended Open the App and turn on the Bluetooth in your phone, sign up your account and follow the guidelines to set up your profile and connection step by step. The scale has to be on when start to connect with it. All measurements you take can be saved in history by getting access to your own account. If you do not receive an authenticode in the email, please check your Spam or Junk folder. Please allow to write data to Apple health or Google fit when prompted. Also, allow MovingLife to use Bluetooth. Smart Body Scale measure your body data Settings 3. Allow MovingLife to use Bluetooth when prompted. Make sure Bluetooth is turned on. 4. Tap IB-A3 in this example to add the weight scale 1. Install batteries for the scale or fully charged 2. Gently step on the scale to turn on 3. Make sure your phone is close to the scale Language Theme Unit Apple Health Fitbit kg, cm The display is lighted up Bonded device Smart Body Scale 3. Download and Set up the Application IB-A3 Mac:187A93A66239 Connect Go to the App Store or Google Play, and search MovingLife to download the Application. Or scan the QR code below with your phone. 5. Allow MovingLife to access your Apple Health on iOS phone. Select allow to write Weight data. Be sure to use the same email address that connected with your Virgin Pulse account. 2) Android Settings Movi n gL i fe Weight Note:
After installing the batter battery cover. Please the batter 3 months) .
, please close the
(more than App: MovingLife Visitor 6. For Android phone user, you may have to go to Me on the bottom right conner of the app, tap Setting on top, then enable Google Fit. Be sure to use the same email address that connected with your Virgin Pulse account. 7. After taking a measurement with the MovingLife app open on your phone, the data will show in your Virgin Pulse account a few minutes later. Making sure your Virgin Pulse account is connected to Apple Health or Google Fit. 8. Congratulations! Setup is complete. Language Theme Change Password Unit Fitbit Google Fit kg, cm Step gently to turn on the scale Tips:
Ensure that the personal information is true and correct, so that we better provide more comprehensive scientific guidance. As the APP is constantly upgrading, if there is any difference, please refer to the actual display prevails in the APP. 1 Start 2 3 4 5 5. Start Measurement 1. Place the scale on a hard, flat surface (not a carpet or mat) with the MovingLife app open on your phone. Note: Placing on carpet may cause inaccurate measurements or tipping. 2. Gently step on the scale, then the scale will be automatically turned on. Warning Indications Advise for Use & Care 41 F to 95 F When the digits 0.0 lb are shown on the display, the scale is ready for use. Standevenly on the scale without moving and wait until your weight shown on displayis stable and locked. bathroom About the Bathroom Scale 3. Stand on the scale until the display digits flash 3 times, showing your final measurement. Your results will show in the App, only shows your weight and BMI. Place the scale on a hard, flat surface Gently step on the scale, then the scale will be automatically turned on. Show your results in the App. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 6 7 8 E-MAIL: sales@camry.com.cn Bluetooth Personal Scale IB-1 Series VP-SC001