| submitted | available | document details (if available) | source link |
|---|---|---|---|
| January 13 2020 | January 13 2020 | Administrator Microsoft® Word 2019 |
| various | ISB180B-INSTRUCTION MANUAL | Users Manual | 118.24 KiB | January 13 2020 |
ISB180B Portable Bluetooth Speaker Please read this instruction manual before you operate the player and keep the manual for your reference in future. INSTRUCTION Pairing Bluetooth Enabled Devices The first time you use your Bluetooth device with this player, you will need to connect or "pair" it with the player first. 1. Switching to Bluetooth mode. The blue indicator will flash, indicating that the system has entered pairing mode and will be searchable by your Bluetooth enabled device. 2. Activate your Bluetooth enabled device and select the search mode. ISB180 will appear on your Bluetooth device list. Select ISB180 in the pairing list. 3.The blue indicator will light up if pairing succeeds. AUX IN Connect one end of a 3.5 mm audio cable to speakers AUX INPUT jack, then connect the other end to the output jack of your audio device. Micro SD card This speaker can play audio files such as MP3 that are stored on a micro SD card. Insert your micro SD card
(not included) into the micro SD card socket for playback. Top view 1. LED Indicator 2.
/ : Under Bluetooth and Micro SD card mode, Short press this button to Play/Pause music playback. Under AUX mode, short press this button to mute/unmute the sound. Long press this button to disconnect the Bluetooth connection when the devices has successfully paired with speaker. 3.
: Under Bluetooth and micro SD card mode, press this button to skip to previous track. 4.
: Under Bluetooth and micro SD card mode, press this button to skip to next track. 5.
/SOURCE : Long press to switch the unit between on and standby mode. Short Press to select your preferred source. 6. Micro SD card Socket 7. AUX : Use 3.5mm audio cable(not supplied) to connect speaker with external audio device. 8. DC 5V: Micro USB port is for connecting to DC 5V USB cable, to charge the speaker. Charging the speaker The speaker has a built-in, rechargeable lithium ion battery. To avoid damage, do not attempt to remove the battery.Red indicator lighted when charging, and off after fully charged. Please charge the speaker a minimum of 6 hours prior to first use. And the charging time is 4-5 hours in the future. (Important: To avoid a complete discharge of battery, charge the speaker at least once every month.) Technical data Product Type Port Power output Product dimensionLWH) Power supply Channel Portable Bluetooth Speaker 1TF card port 1AUX IN 23W 110110215MM DC 5V 2.0CH Product Warning and Maintenance 1..Do not drop speakers to avoid damaging internal structure. 2.Do not use this product in wet environment to avoid water droplets into the speaker. 3.Do not use any chemical solvent to wipe the surface of machine. 4.This speaker is high sealing design. Do not attempt to disassemble this speak er. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This product uses the FCC Data API but is not endorsed or certified by the FCC