ZTE Z861BL User Manual Your phone at a glance Front camera SIM card tray Receiver Touch Screen Back key Home key Noise-reduction MIC Back camera Light/proximity sensor Volume button Power button Menu key Headset jack Flash Speaker USB type-C port Microphone 1 Inserting the SIM card 1. Insert the end of the eject tool into the hole of the card tray and press firmly until the tray pops out. 2. Put the nano-SIM card into the tray. 3. Push the card tray back into the phone. Note Your phone supports a nano-SIM card ONLY. Dimensions of a nano-SIM card: 9mm*12mm 2 Inserting the memory card 1. Remove the back cover.. 2. Insert the memory card into the memory card slot. 3. Install the back cover. 3 Charging the battery Connect the phone to the power outlet using the included USB cable and power adapter. 4 Power on Long press the Power button to power on the mobile phone. 5 Declaration of RoHS Compliance Were determined to reduce the impact we have on the environment and take responsibility for the earth we live on. So this document allows us to formally declare that the Z861BL, manufactured by ZTE Corporation, fully complies with the European Parliaments RoHS
(Restriction of Hazardous Substances) Directive 2002/95/EC, with respect to all the following substances:
(1) Lead (Pb)
(2) Mercury (Hg)
(3) Cadmium (Cd)
(4) Hexavalent Chromium (Cr (VI))
(5) Polybrominated biphenyl (PBB)
(6) Polybrominated diphenyl ether (PBDE) Our compliance is witnessed by written declaration from our suppliers. This confirms that any potential trace contamination levels of the substances listed above are below the maximum level set by EU 2002/95/EC, or are exempt due to their application. The Z861BL manufactured by ZTE Corporation meets all the requirements of EU 2002/95/EC. Disposal of your old phone 1. When the wheelie bin symbol is attached to a product, it means the product is covered by the European Directive 2002/96/CE. 2. All electrical and electronic products should be disposed of separately from normal household waste via designated collection points provided by government or local authorities. 3. The correct disposal of electrical and electronic products will help protect the environment and human health. 6 Health and safety FCC Regulations:
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different is connected.
-Consult the dealer or an experienced radio/TV technician for help. from that to which the receiver 7 level set by
(RF) energy FCC Note:
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF exposure information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at in all tested its highest certified power frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is designed to operate at multiple power levels so as to use only the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested inaccordance with the measurement methods and procedures specified in IEEE1528. This device has been tested and meets the FCC RF exposure guidelines when tested with the device directly contacted to the body. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels is complied with SAR for general is because the phone the power standard required reach to 8 evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-Z861BL For this device, the highest reported SAR value for usage against the head is 0.713 W/kg, for usage near the body is 1.258 W/kg. Hotspot SAR is 1.290W/kg, Simultaneous SAR is 1.582W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided. This device does not support V.O.I.P. function. It means that the functions of WLAN and Bluetooth do not have voice capability in the held to ear mode for phone service. 9 Using your phone safely On the road Using a phone while driving is illegal in many countries. Please follow local laws and drive safely at all times. Near sensitive electronics Dont use your phone near sensitive electronic equipment particularly medical devices such as pacemakers as it could cause them to malfunction. It can also interfere with the operation of fire detectors and other automatic-control equipment. For more information about how your phone affects pacemakers or other electronic equipment, please contact the manufacturer or your local distributor. Your phone may cause interference when used near TVs, radios or automated office equipment. While flying interference with Your phone can cause its essential you aircraft equipment. So follow airline regulations. And if airline personnel ask you to switch off your phone, or disable its wireless functions, please do as they say. In hospital Your phone may interfere with the normal operation of medical equipment. Follow all hospital regulations and turn it off when youre asked to by posted warnings or medical staff. 10 At a petrol station Dont use your phone at petrol stations. In fact, its always best to switch off whenever youre near fuels, chemicals or explosives. Around water Keep your phone away from water (or any other liquid). Its not a waterproof model. Making repairs Never take your phone apart. Please leave that to the professionals. Unauthorised repairs could break the terms of your warranty. Broken antenna Dont use your phone if the antenna is damaged, as it could cause injury. Please do not touch or cover the antenna area (the upper part on the back of your phone) during the conversation to avoid affecting talk quality and consuming more battery power, which might reduce the talk time and standby time. Around children Keep your phone out of childrens reach. It should never be used as a toy and it might not be good for their health. Original accessories Only use the original accessories supplied with your phone or those approved by the manufacturer. Using unapproved accessories may affect performance, make the warranty 11 void, break national regulations on the use of phones, or even cause injury. Near explosives Turn off your phone in or near areas where explosive materials are used. Always obey local laws and turn off your phone when requested. Emergency calls coverage. Dial To make an emergency call your phone must be turned on and in an area where theres network the national emergency number and touch send. Explain exactly where you are and dont hang up until help has arrived. Working temperature The working temperature for the phone is between 0 and 40. Please dont use the phone outside the range. Using the phone under too high or too low temperature might cause problems. Eyesight Please do not use your phone in dim light for a long time to avoid damage on your eyesight. For some people, exposure to flashing lights
(such as TV) might trigger seizures or dizziness. If you have a history of seizures or epilepsy, consult a doctor before playing video games or enabling a flashlight feature on your phone. 12 of prevent disclosure Safety information In order to protect your personal information and sensitive information, please set a phone password and change it from time to time, make sure to back up important data, back up the data on your phone before disposal and reset your phone. unknown Please applications and browse suspected websites in order to protect your phone against malicious applications and viruses. download not do At very high volume, prolonged listening to a phone can damage your hearing. Charger care and safety Only plug into voltages between 110VAC and 220VAC. Using a voltage outside that range can damage the phone/charger and cause the battery to leak or catch fire. Never short-circuit the charger this may cause electrocution, overheating or damage. Dont charge the phone in direct sunlight or in an area where its damp, dusty, or on a vibrating surface. And charging your phone near or on a TV or radio could interfere with transmission. Dont use the charger if the power cable is damaged. It may cause a fire or give someone an electric shock. Keep water well away from the charger. If the charger does get splashed by water, or any other kind of liquid, immediately unplug 13 it to avoid overheating, fire or electrocution. Dont take the charger apart. It could cause injury, give you an electric shock or catch fire. Never touch any charger, electric cable or socket with wet hands. Dont place heavy objects on the electric cable. If the cable is damaged, dont try to mend it yourself it could cause a fire or electrocute you. Always unplug the charger before you clean it. When unplugging the charger, hold the plug itself, rather than pulling on the cable. A damaged cable can cause electrocution or fire. 14 Care and maintenance Your phone is a delicate device. The following advice will help you to keep it looking good and performing well Use a soft dry cloth to clean your phone, battery and charger. Dont use liquids such as alcohol, dilution agents or benzene. From time-to-time, clean the socket where the charger cable connects to the phone. Dust tends to gather there. This will ensure a really good connection. Dont use needles, pen points or other sharp objects on the keypad or screen. Dont use your phone with wet hands it could injure you and damage the phone. Dont use your phone in dusty or dirty environment. Keep your phone away from extremes of heat like radiators or ovens. It may explode if it gets too hot. If your phone gets wet and the colour of the label on it changes, the warranty will be void, even if the warranty period hasnt expired. If theres anything wrong with the phone, battery, charger, or any accessory, please send them to your nearest service centre for inspection. 15 Legal notice ZTE Corporation Copyright Statement Copyright 2016 by All the copyrights of this document herein belong to ZTE Corporation. Without the written permission of copyright owner, no part of this publication may be excerpted, reproduced, translated by any person or entity in any form or by any means. This document is subject to change without prior notice. ZTE Corporation explanation to this document. keeps the right to make the final Trademarks Android is a trademark of Google, Inc. All other trademarks remain the property of their respective owners. Statement of Third-party Applications During the installation process of some third-party applications, the issues of repeated restart or abnormal use of software might be caused by incompatibility of the third-party applications, rather than the phone itself. 16 This device complies with the FCC HAC requirements has also been tested E-Field, H-Field and T-Coil, the worst test result of M rating is M4, the T rating is T3 for GSM850/1900, T4 for WCDMA band II/IV/V. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not rated. M4 is the better/higher of the two ratings. Your device is rated M4. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing aids telecoil than phones that are not rated. T4 is the better/higher of the two ratings. Your device is rated T3 for GSM850/1900, rated T4 for WCDMA band II/IV/V. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service.