all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User manual | Users Manual | 1.74 MiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Test Report |
1 2 3 | User manual | Users Manual | 1.74 MiB |
LTE Indoor CPE User Guide Index 1 3.2 3.1 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 GettingStarted..........................................................................................................................5 1.1 WelcometotheCPE..................................................................................................5 ComputerConfigurationRequirements....................................................................5 1.2 1.3 LoggingIntotheWebManagementPage................................................................5 2 Overview...................................................................................................................................7 ViewingtheSystemInformation...............................................................................7 ViewingtheVersionInformation..............................................................................7 ViewingCPUUsage...................................................................................................8 ViewingMemoryUsage............................................................................................8 Viewing4GStatus.....................................................................................................8 ViewingLANStatus...................................................................................................9 ViewingWiFiStatus.................................................................................................9 ViewingWANStatus...............................................................................................10 ViewingThroughputStatistics................................................................................10 ViewingDeviceList.................................................................................................11 3 Network...................................................................................................................................11 WANSettings...........................................................................................................11 3.1.1 WANInterface.................................................................................................11 NetworkMode................................................................................................12 3.1.2 LTESettings..............................................................................................................12 ViewingModuleInformation..........................................................................12 LTESetting.......................................................................................................13 ConnectMethodSetting.................................................................................14 APNManagement...................................................................................................17 APNSettingsinNATmode..............................................................................17 APNlist............................................................................................................18 PINManagement....................................................................................................19 ViewingtheStatusoftheUSIMCard..............................................................19 EnablingPINVerification.................................................................................19 DisablingPINVerification................................................................................20 VerifyingthePIN..............................................................................................20 ChangingthePIN.............................................................................................20 SettingAutomaticVerificationofthePIN.......................................................20 VerifyingthePUK............................................................................................21 LANSetting..............................................................................................................21 SettingLANHostParameters..........................................................................21 ConfigurationtheDHCPServer.......................................................................22 BundledAddressList.......................................................................................22 DMZSettings...........................................................................................................24 StaticRoute.............................................................................................................24 AddStaticRoute..............................................................................................24 ModifyStaticRoute.........................................................................................25 3.4.1 3.4.2 3.4.3 3.4.4 3.4.5 3.4.6 3.4.7 3.2.1 3.2.2 3.2.3 3.5.1 3.5.2 3.5.3 3.3.1 3.3.2 3.7.1 3.7.2 3.6 3.7 3.3 3.4 3.5 5 5.2 4.1 3.7.3 4.2 4.3 4.3.1 4.3.2 5.1.1 5.1.2 5.1.3 5.1.4 5.1.5 5.1.6 5.1.7 DeleteStaticRoute..........................................................................................25 4 WiFi........................................................................................................................................26 WLANSetting..........................................................................................................26 SettingGeneralParameters.............................................................................26 4.1.1 4.1.2 WPSSettings...................................................................................................27 SettingSSIDProfile..................................................................................................27 AccessManagement...............................................................................................29 SettingtheAccessPolicy.................................................................................29 ManagingtheWiFiAccessList.......................................................................29 WDS.........................................................................................................................30 4.4 Security...................................................................................................................................31 MACFiltering..........................................................................................................31 5.1 EnablingMACFilter.........................................................................................32 DisablingMACFilter........................................................................................32 SettingAllowaccessnetworkwithintherules................................................32 SettingDenyaccessnetworkwithintherules................................................33 AddingMACFilteringrule...............................................................................33 ModifyingMACFilteringrule..........................................................................34 DeletingMACFilteringrule.............................................................................34 IPFiltering...............................................................................................................35 EnablingIPFiltering.........................................................................................35 DisablingIPFiltering........................................................................................35 SettingAllowaccessnetworkoutsidetherules..............................................36 SettingDenyaccessnetworkoutsidetherules...............................................36 AddingIPFilteringrule....................................................................................36 ModifyingIPFilteringrule...............................................................................37 DeletingIPFilteringrule..................................................................................38 URLFiltering............................................................................................................38 EnablingURLFiltering.....................................................................................38 DisablingURLFiltering....................................................................................39 AddingURLFilteringlist..................................................................................39 ModifyURLFilteringlist..................................................................................39 DeletingURLFilteringlist................................................................................40 PortForwarding.......................................................................................................40 AddingPortForwardingrule...........................................................................40 ModifyingPortForwardingrule......................................................................41 DeletingPortForwardingrule.........................................................................42 5.5 UPnP........................................................................................................................42 VPNSetting.............................................................................................................................43 VOIP.........................................................................................................................................43 ViewVOIPInformation...........................................................................................44 7.1 7.2 ConfiguringSIPServer.............................................................................................44 7.3 ConfiguringSIPAccount..........................................................................................45 System.....................................................................................................................................46 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.3.1 5.3.2 5.3.3 5.3.4 5.3.5 5.4.1 5.4.2 5.4.3 6 7 5.3 5.4 8 8.2 8.1 8.2.1 8.2.2 8.3 8.4 8.5 8.6 8.1.1 8.1.2 8.1.3 8.1.4 Maintenance...........................................................................................................46 Reboot.............................................................................................................46 Reset................................................................................................................47 BackupConfigurationFile...............................................................................47 UploadConfigurationFile...............................................................................47 VersionManager.....................................................................................................48 ViewingVersionInfo.......................................................................................48 VersionUpgrade..............................................................................................48 TR069......................................................................................................................49 Date&Time............................................................................................................50 DDNS.......................................................................................................................52 Diagnosis.................................................................................................................53 Ping..................................................................................................................53 Traceroute.......................................................................................................54 Syslog.......................................................................................................................55 Local................................................................................................................55 Network...........................................................................................................56 Account...................................................................................................................57 8.8 RemoteWEBAccess................................................................................................58 8.9 Logout.....................................................................................................................59 8.10 FAQs........................................................................................................................................59 8.7.1 8.7.2 8.6.1 8.6.2 8.7 9 1 GettingStarted 1.1 WelcometotheCPE Inthisdocument,theLTE(LongTermEvolution)IndoorCPE(customerpremisesequipment) will bereplacedbytheCPE.Carefullyreadthefollowingsafetysymbolstohelpyouuseyour CPEsafelyandcorrectly:
Additionalinformation Optionalmethodsorshortcutsforanaction Potentialproblemsorconventionsthatneedtobespecified 1.2 ComputerConfigurationRequirements Foroptimumperformance,makesureyourcomputermeetsthefollowingrequirements. Item CPU Memory Harddisk Requirement Pentium500MHzorhigher 128MBRAMorhigher 50MBavailablespace Operatingsystem Microsoft:WindowsXP,WindowsVista,Windows7orhigher Displayresolution Browser Mac: Mac OS X 10.5 or higher 1024x768pixelsorhigher InternetExplorer7.0orlater Firefox3.6orlater Opera10orlater Safari5orlater Chrome9orlater 1.3 LoggingIntotheWebManagementPage UseabrowsertologintothewebmanagementpagetoconfigureandmanagetheCPE. ThefollowingproceduredescribeshowtouseacomputerrunningWindowsXPandInternet Explorer7.0tologintothewebmanagementpageoftheCPE. 1. ConnecttheCPEproperly. 2. LaunchInternetExplorer,enterhttp://192.168.1.1intheaddressbar,andpressEnter.As showninFigure11. Figure11 3. Entertheusernameandpassword,andclickLogIn. Youcanlogintothewebmanagementpageafterthepasswordisverified.AsshowninFigure12. Figure12 Thedefaultusernameisadminandthedefaultpasswordisolo@peru. ToprotectyourCPEfromunauthorizedaccess,changethepasswordafteryour first login. The CPE supports diagnostic function. If you encounter problems, please contact customerserviceforthespecificusingmethod. Toensureyourdatasafety,itisrecommendedthatyouturnonthefirewall,and conserveyourloginandFTPpasswordcarefully. 2 Overview 2.1 ViewingtheSystemInformation ToviewtheSystemInformation,performthefollowingsteps:
1. ChooseOverview;
2. IntheSystemInformationarea,viewthesystemstatus,suchasRunningtimeandOnline time.AsshowninFigure21. Figure21 2.2 ViewingtheVersionInformation ToviewtheVersionInformation,performthefollowingsteps:
1. ChooseOverview;
2. In the Version Information area, view the version information, such as Product name, Softwareversion,UBootversionandsoon.AsshowninFigure22. Figure22 2.3 ViewingCPUUsage ToviewtheCPUusage,performthefollowingsteps:
1. ChooseOverview;
2. IntheCPUUsagearea,viewtheCPUusageinformation,suchasCurrentCPUusage,Max CPUusage,MinCPUusage.AsshowninFigure23. Figure23 2.4 ViewingMemoryUsage Toviewthememoryusage,performthefollowingsteps:
1. ChooseOverview;
2. In the Memory Usage area, view the memory usage information, such as Total memory, Current memory usage, Max memory usage and Min memory usage. As shown in Figure 24. Figure24 2.5 Viewing4GStatus Toviewthe4Gstatus,performthefollowingsteps:
1. ChooseOverview;
2. In the 4G Status area, view the information about USIM card status, Connect status, Operator,CurrentMobileNetwork,Signalqualityandsoon.AsshowninFigure25. Figure25 2.6 ViewingLANStatus ToviewtheLANstatus,performthefollowingsteps:
1. ChooseOverview;
2. IntheLANStatusarea,viewtheLANstatus,suchasMacaddress,IPaddressandSubnet mask.AsshowninFigure26. Figure26 2.7 ViewingWiFiStatus ToviewtheWiFistatus,performthefollowingsteps:
1. ChooseOverview;
2. In the WiFi Status area, view the information about WiFi status, SSID, Chanel NO., MAC addressandWDSstatus.AsshowninFigure27. Figure27 2.8 ViewingWANStatus ToviewtheWANstatus,performthefollowingsteps:
1. ChooseOverview;
2. IntheWANStatusarea,viewthewanstatus,suchastheDNS,Currentdatarateandthe APNstatus.AsshowninFigure28. Figure28 2.9 ViewingThroughputStatistics Toviewthethroughputstatistics,performthefollowingsteps:
1. ChooseOverview;
2. IntheThroughputStatisticsarea,viewthethroughputstatistics,suchasWANthroughput andLANthroughput.AsshowninFigure29. Figure29 2.10 ViewingDeviceList Toviewthedevicelist,performthefollowingsteps:
1. ChooseOverview;
2. In the Device List area, view the device information which connect to the CPE, such as Devicename,Macaddress,IPaddressandLeasetime.AsshowninFigure210. Figure210 3 Network 3.1 WANSettings 3.1.1 WANInterface TosettheWANinterface,performthefollowingsteps:
1. ChooseNetwork>WANSettings;
2. 3. ClickSubmit.AsshowninFigure31. IntheNetworkModearea,selectaninterfacebetweenLTEandEthernet;
Figure31 3.1.2 NetworkMode Tosetthenetworkmode,performthefollowingsteps:
1. ChooseNetwork>WANSettings;
2. 3. ClickSubmit.AsshowninFigure32. IntheNetworkModearea,selectamodebetweenBRIDGEandNAT;
Figure32 3.2 LTESettings 3.2.1 ViewingModuleInformation Toviewthemobilemoduleinformation,performthefollowingsteps:
1. ChooseNetwork>LTESettings;
2. IntheModuleInformationarea,youcanviewtheinformationaboutthemodule,suchas modulemodel,moduleversion,IMEI.AsshowninFigure33. Figure33 3.2.2 LTESetting TosettheLTEnetwork,performthefollowingsteps:
1. ChooseNetwork>LTESettings;
2. 3. IntheSettingarea,youcansettheconfigurationofLTEnetwork;
IntheLTESettingsarea,youcanviewtheLTEnetworkconnectstatus,suchasFrequency, RSSI,RSRP,RSRQ,CINR,SINR,CellIDandsoon.AsshowninFigure35. Figure35 3.2.3 ConnectMethodSetting Tosettheconnectmethod,performthefollowingsteps:
1. ChooseNetwork>LTESettings;
2. IntheSettingarea,SelectaconnectmethodbetweenAutoandManual.AsshowninFigure 36. Figure36 3.2.3.1 Auto Connect LTE Network TosettheCPEautomaticallyconnecttotheinternet,performthefollowingsteps:
1. ChooseNetwork>LTESettings;
2. IntheSettingarea,settheconnectmethodasAuto,whentheLTEnetworkisready,theCPE willbeconnectedautomaticity.AsshowninFigure37. Figure37 3.2.3.2 Manual Connect Mobile Network Tosetthemobilenetworkmanualconnecttotheinternet,performthefollowingsteps:
1. ChooseNetwork>LTESettings;
2. IntheSettingarea,settheconnectmethodasManual,whentheLTEnetworkisready,you cansettheCPEconnecttotheLTEnetworkordisconnectfromtheLTEnetwork.Asshownin Figure38. Figure38 3.3 APNManagement 3.3.1 APNSettingsinNATmode TosetandmanageAPNinNATmode,performthefollowingsteps:
1. ChooseNetwork>APNManagement. 2. 3. ChooseaAPNnumberwhichyouwanttoset. 4. IntheAPNManagementarea,youcansettheAPN. IntheAPNSettingareayoucansettheAPNparameters,suchasenableordisabletheapn, apnname,username,passwordandsoon. IfyouwantsetaAPNasdefaultgateway,youshouldcheckthatisenabled. 5. SelectaAPNtypefromthedropdownlist,suchasVoIP,TR069orVoIP+TR069. 6. 7. ClickSubmit.AsshowninFigure39. Figure39 3.3.2 APNlist ToviewtheAPNlist,performthefollowingsteps:
1. ChooseNetwork>APNManagement. 2. IntheAPNlistareayoucanviewtheAPNlist.Asshowninthefigure311. Figure311 3.4 PINManagement TomanagethePIN,youcanperformthefollowingoperationsonthePINManagementpage:
1. EnableordisablethePINverification. 2. VerifythePIN. 3. ChangethePIN. 4. SetautomaticverificationofthePIN.AsshowninFigure312. Figure312 3.4.1 ViewingtheStatusoftheUSIMCard ToviewthestatusoftheUSIMcard,performthefollowingsteps:
1. ChooseNetwork>PINManagement. 2. ViewthestatusoftheUSIMcardintheUSIMcardstatusfield. 3.4.2 EnablingPINVerification ToenablePINverification,performthefollowingsteps:
1. ChooseNetwork>PINManagement. 2. 3. EnterthePIN(4to8digits)intheEnterPINbox. 4. ClickSubmit. SetPINverificationtoEnable. 3.4.3 DisablingPINVerification TodisablePINverification,performthefollowingsteps:
1. ChooseNetwork>PINManagement. 2. 3. EnterthePIN(4to8digits)intheEnterPINbox. 4. ClickSubmit. SetPINverificationtoDisable. 3.4.4 VerifyingthePIN IfPINverificationisenabledbutthePINisnotverified,theverificationisrequired.Toverifythe PIN,performthefollowingsteps:
1. ChooseNetwork>PINManagement. 2. EnterthePIN(4to8digits)inthePINbox. 3. ClickSubmit. 3.4.5 ChangingthePIN SetPINverificationtoEnable. SetChangePINtoEnable. ThePINcanbechangedonlywhenPINverificationisenabledandthePINisverified. TochangethePIN,performthefollowingsteps:
1. ChooseNetwork>PINManagement. 2. 3. 4. EnterthecurrentPIN(4to8digits)inthePINbox. 5. EnteranewPIN(4to8digits)intheNewPINbox. 6. RepeatthenewPINintheConfirmPINbox. 7. ClickSubmit. 3.4.6 SettingAutomaticVerificationofthePIN YoucanenableordisableautomaticverificationofthePIN.Ifautomaticverificationis enabled, theCPEautomaticallyverifiesthePINafterrestarting.Thisfunctioncanbeenabled onlywhen PINverificationisenabledandthePINisverified. ToenableautomaticverificationofthePIN,performthefollowingsteps:
1. ChooseNetwork>PINManagement. 2. 3. SetPinverificationtoEnable. SetRemembermyPINtoEnable. 4. ClickSubmit. 3.4.7 VerifyingthePUK IfPIN verification isenabledandthePIN failstobe verified forthreeconsecutivetimes,the PINwillbelocked.Inthiscase,youneedtoverifythePUKandchangethePINtounlockit. ToverifythePUK,performthefollowingsteps:
1. ChooseNetwork>PINManagement. 2. EnterthePUKinthePUKbox. 3. EnteranewPINintheNewPINbox. 4. RepeatthenewPINintheConfirmPINbox. 5. ClickSubmit. 3.5 LANSetting 3.5.1 SettingLANHostParameters Bydefault,theIPaddressis192.168.1.1withasubnetmaskof255.255.255.0.Youcanchange thehostIPaddresstoanotherindividualIPaddressthatiseasytoremember.MakesurethatIP addressisuniqueonyournetwork.IfyouchangetheIPaddressoftheCPE,youneedtoaccess thewebmanagementpagewiththenewIPaddress. TochangetheIPaddressoftheCPE,performthefollowingsteps:
1. ChooseNetworkSetting>LANSettings. 2. 3. 4. ClickSubmit.AsshowninFigure313. IntheLANHostSettingsarea,setIPaddressandsubnetmask. IntheDHCPSettingarea,settheDHCPservertoEnable. Figure313 3.5.2 ConfigurationtheDHCPServer DHCPenablesindividualclientstoautomaticallyobtainTCP/IPconfigurationwhenthe server powerson.YoucanconfiguretheCPEasaDHCPserverordisableit.Whenconfiguredasa DHCPserver,theCPEautomaticallyprovidestheTCP/IPconfiguration fortheLANclientsthat supportDHCPclientcapabilities.IfDHCPserverservicesare disabled,youmusthaveanother DHCPserveronyourLAN,oreachclientmustbemanually configured. ToconfigureDHCPsettings,performthefollowingsteps:
1. ChooseNetworkSetting>LANSettings. 2. 3. SettheDHCPservertoEnable. SetStartIPaddress. ThisIPaddressmustbedifferentfromtheIPaddresssetontheLANHostSettingsarea, buttheymustbeonthesamenetworksegment. SetEndIPaddress. ThisIPaddressmustbedifferentfromtheIPaddresssetontheLANHostSettingsarea, buttheymustbeonthesamenetworksegment. SetLeasetime. 4. 5. Lease time can be set to 1 to 10,080 minutes. It is recommended to retain the defaultvalue. 6. ClickSubmit.AsshowninFigure314. Figure314 3.5.3 BundledAddressList YoucanbindanIPaddresstoadevicebasedonitsMACaddress.Thedevicewillreceivethe sameIPaddresseachtimeitaccessestheDHCPserver.Forexample,youcanbindanIP address toanFTPserverontheLAN. Toaddanitemtothesetuplist,performthefollowingsteps:
1. ChooseNetworkSetting>LANSettings. 2. ClickAddlist. 3. SettheMACaddressandIPAddress. 4. ClickSubmit.AsshowninFigure315. Figure315 Tomodifyaniteminthesetuplist,performthefollowingsteps:
1. ChooseNetworkSetting>LANSettings. 2. Choosetheitemtobemodified,andclickEdit. 3. SettheMACaddressandIPAddress. 4. ClickSubmit.AsshowninFigure316. Figure316 Todeleteaniteminthesetuplist,performthefollowingsteps:
1. ChooseNetworkSetting>LANSettings. 2. Choosetheitemtobedeleted,andclickDelete. 3.6 DMZSettings Ifthedemilitarizedzone(DMZ)isenabled,thepacketssentfromtheWANaredirectlysent to aspecifiedIPaddressontheLANbeforebeingdiscardedbythefirewall. TosetDMZ,performthefollowingsteps:
1. ChooseNetworkSetting>DMZSettings. 2. 3. 4. SetDMZtoEnable.
(Optional)SetICMPRedirecttoEnable. SetHostaddress. ThisIPaddressmustbedifferentfromtheIPaddresssetontheLANHost Settingspage,buttheymustbeonthesamenetworksegment. 5. ClickSubmit.AsshowninFigure317. Figure317 3.7 StaticRoute 3.7.1 AddStaticRoute Toaddastaticroute,performthefollowingsteps:
1. ChooseNetworkSetting>StaticRoute. 2. ClickAddlist. 3. 4. 5. 6. ClickSubmit.AsshowninFigure318. SettheDestIPaddressandSubnetmask. SelectanInterfacefromthedropdownlist. IfyouselectLANastheinterface,youneedsetaGateway. Figure318 3.7.2 ModifyStaticRoute Tomodifyanaccessrestrictionrule,performthefollowingsteps:
1. ChooseSecurity>StaticRoute. 2. Choosetheitemtobemodified,andclickEdit. 3. Repeatsteps3through5inthepreviousprocedure. 4. ClickSubmit.AsshowninFigure319. Figure319 3.7.3 DeleteStaticRoute Todeleteastaticroute,performthefollowingsteps:
1. ChooseSecurity>StaticRoute. 2. Choosetheitemtobedeleted,andclickDelete. 4 WiFi 4.1 WLANSetting ThisfunctionenablesyoutoconfiguretheWiFiparameters. 4.1.1 SettingGeneralParameters ToconfigurethegeneralWiFisettings,performthefollowingsteps:
1. ChooseWiFi>WiFiSettings. 2. 3. ParameterValue 802.11b/g/n IntheGeneralSettingsarea,setWLANtoEnable. SetModetooneofthevaluesdescribedinthefollowingtable:
Description The WiFi client can connect to the CPE in 802.11b, 802.11g, or 802.11n mode. If the clientconnectstotheCPEin802.11nmode, the Advanced Encryption Standard (AES) encryption mode is required. The WiFi client can connect to the CPE in 802.11bor802.11gmode. The WiFi client can connect to the CPE in 802.11bmode. The WiFi client can connect to the CPE in 802.11gmode. 802.11b/g 802.11b 802.11g SettheChannelNo.from1to11. 4. 5. ClickSubmit.AsshowninFigure41. 4.1.2 WPSSettings Figure41 WiFi Protected Setup (WPS) enables you to simply add a wireless client to the network without needing to specifically configure the wireless settings, such as the SSID, security modeandpassphrase.YoucanuseeithertheWPSbuttonorPINtoaddthewirelessclient. ToconfigureWiFiWPSsettings,performthefollowingsteps:
1. ChooseWiFi>WPSSettings. 2. SetWPStoEnable. 3. ClickSubmit.AsshowninFigure42. Figure42 4.2 SettingSSIDProfile AfteryouconfiguretheCPEontheSSIDProfilepage,theWiFiclientconnectstotheCPE basedonpresetrules,improvingaccesssecurity. ToconfiguretheCPEontheSSIDProfilepage,performthefollowingsteps:
1. ChooseWiFi>WiFiSettings. 2. SetSSID. TheSSIDcancontain1to32ASCIIcharacters.Itcannotbeemptyandthelastcharacter cannotbeablankcharacter.Inaddition,theSSIDcannotcontainthefollowingspecial characters:/'="\&
TheWiFiclientconnectstotheCPEusingthefoundSSID. 3. SetMaximumnumberofdevices. ThisparameterindicatesthemaximumnumberofWiFiclientsthatconnecttotheCPE. Amaximumof32clientscanconnecttotheCPE. 4. SetHideSSIDbroadcasttoEnable. IftheSSIDishidden,theclientcannotdetecttheCPE'sWiFiinformation. 5. SetAPisolationtoEnable. TheclientscanconnecttotheCPEbutcannotcommunicatewitheachother. 6. SetSecurity. IfSecurityissettoNONE(notrecommended),WiFiclientsdirectlyconnecttotheCPE. Thissecuritylevelislow. If Security is set to WEP, WiFi clients connect to the CPE in webbased encryption mode. IfSecurityissettoWPAPSK,WiFiclientsconnecttotheCPEinWPAPSKencryption mode. IfSecurityissettoWPA2PSK,WiFiclientsconnecttotheCPEinWPA2PSKencryption mode.Thismodeisrecommendedbecauseithasahighsecuritylevel. If Security is set to WPAPSK & WPA2PSK, WiFi clients connect to the CPE in WPAPSK&WPA2PSKencryptionmode. 7. Settheencryptionmode. If WEP Setsto Authenticationmode Sharedauthentication:Theclient Description connectstotheCPEinshared authenticationmode. Openauthentication:Theclientconnects totheCPEinopenauthenticationmode. Both:TheclientconnectstotheCPEin sharedoropenauthenticationmode. 128bit:Only13ASCIIcharactersor26hex characterscanbeenteredintheKey1to Key4boxes. 64bit:Only5ASCIIcharactersor10hex characterscanbeenteredintheKey1to Key4boxes. Thisvaluecanbesetto1,2,3,or4.Afterakey indexisselected,thecorrespondingkeytakes effect. Only8to63ASCIIcharactersor8to64hex characterscanbeentered. ThisvaluecanbesettoTKIP+AES,AES,or TKIP. Only8to63ASCIIcharactersor8to64hex characterscanbeentered. ThisvaluecanbesettoTKIP+AES,AES,or TKIP. Only8to63ASCIIcharactersor8to64hex characterscanbeentered. ThisvaluecanbesettoTKIP+AES,AES,or TKIP. Encryptionpassword length Current passwordindex WPAPSK WPAPSK WPAencryption WPA2PSK(reco mmended) WPAPSK WPAencryption WPAPSK&
WPA2PSK WPAPSK WPAencryption 8. ClickSubmit.AsshowninFigure43. Figure43 4.3 AccessManagement 4.3.1 SettingtheAccessPolicy ThisfunctionenablesyoutosetaccessrestrictionpoliciesforeachSSIDtomanageaccessto theCPE. ToconfigureWiFiMACcontrolsettings,performthefollowingsteps:
1. ChooseWiFi>AccessManagement. 2. IntheWLANAccessListSettingsarea,setAccessPolicy. TheaccesspolicycanbesettoDisable,BlacklistorWhitelist. IfSSID'sMACAccessissettoDisable,accessrestrictionsdonottakeeffect. IfSSID'sMACAccessissettoBlacklist,onlythedevicesthatarenotintheblacklist canconnecttotheCPE. If SSID's MAC Access is set to Whitelist, only the devices in the whitelist can connecttotheCPE. 3. ClickSubmit.AsshowninFigure44. Figure44 4.3.2 ManagingtheWiFiAccessList ThisfunctionenablesyoutosettheSSIDaccesspoliciesbasedonMACaddresses. ToaddanitemtotheWiFiaccesslist,performthefollowingsteps:
1. ChooseWiFi>AccessManagement. 2. ClickAdd. 3. SetMACaddress. 4. ClickSubmit.AsshowninFigure45. Figure45 TomodifyanitemintheWiFiaccesslist,performthefollowingsteps:
1. ChooseWiFi>AccessManagement. 2. ClickEditMACList. 3. Choosetheitemtobemodified,andclickEdit. 4. SetMACaddress. 5. SetoneoftheSSIDtoEnabletomaketheMACaddresstakeeffectfortheSSID. 6. ClickSubmit.AsshowninFigure46. Figure46 TodeleteanitemfromtheWiFiaccesslist,performthefollowingsteps:
1. ChooseWiFi>AccessManagement. 2. Choosetheitemtobedeleted,andclickDelete.AsshowninFigure47. Figure47 4.4 WDS TheCPEsupportsthewirelessdistributionsystem(WDS).AllWiFidevicesinaWDSmustbe configuredtousethesameradiochannel,encryptionmode,SSID,andencryptionkey.You cansettheWDSencryptionmodetoNONEorWPA/WPA2.IfyousettheWDSencryption modetoNONE,theWiFiclientscanuseNONEorWEPencryptionmode.IfyousettheWDS encryption mode to WPA/WPA2PSK, the WiFi clients can use WPA/WPA2PSK encryption mode.AfterWDSisenabled,disableDHCPonCPEsthatarenotdirectlyconnectedtothe WANport. IfWDSisenabled,theWPSfunctionwillnottakeeffect.IfthechannelissettoAuto,you needtosetthechannel. ToconfiguretheWDS,performthefollowingsteps:
1. ChooseWiFi>WDS. 2. SetWDStoEnable. 3. SetWDSModeasRepeaterMode;
4. ClickScan. Fromthesearchresults,choosetheSSIDofthenetworkingdevice. 5. SetSecurity. WPAPSKcancontain8to63ASCIIcharactersor64hexcharacters. 6. ClickSubmit.AsshowninFigure48. Figure48 5 Security 5.1 MACFiltering ThispageenablesyoutoconfiguretheMACaddressfilteringrules. 5.1.1 EnablingMACFilter ToenableMACaddressfilter,performthefollowingsteps:
1. ChooseSecurity>MACFiltering 2. 3. ClickSubmit.AsshowninFigure51. SetMACfilteringtoEnable. Figure51 5.1.2 DisablingMACFilter TodisableMACaddressfilter,performthefollowingsteps:
1. ChooseSecurity>MACFiltering 2. 3. ClickSubmit.AsshowninFigure52. SetMACfilteringtoDisable. Figure52 5.1.3 SettingAllowaccessnetworkwithintherules Tosetallowaccessnetworkwithintherules,performthefollowingsteps:
1. ChooseSecurity>MACFiltering. SetAllowaccessnetworkwithintherules. 2. 3. ClickSubmit.AsshowninFigure53. Figure53 5.1.4 SettingDenyaccessnetworkwithintherules Tosetdenyaccessnetworkwithintherules,performthefollowingsteps:
1. ChooseSecurity>MACFiltering. 2. 3. ClickSubmit.AsshowninFigure54. SetDenyaccessnetworkwithintherules. Figure54 5.1.5 AddingMACFilteringrule ToaddaMACfilteringrule,performthefollowingsteps:
1. ChooseSecurity>MACFiltering. 2. ClickAddlist. 3. 4. ClickSubmit.AsshowninFigure55. SetMACaddress. Figure55 5.1.6 ModifyingMACFilteringrule TomodifyaMACaddressrule,performthefollowingsteps:
1. ChooseSecurity>MACFiltering. 2. Choosetheruletobemodified,andclickEdit. 3. 4. ClickSubmit.AsshowninFigure56. SetMACaddress. Figure56 5.1.7 DeletingMACFilteringrule TodeleteaMACaddressfilterrule,performthefollowingsteps:
1. ChooseSecurity>MACFiltering. 2. Choosetheruletobedeleted,andclickDelete.AsshowninFigure57. Figure57 5.2 IPFiltering DataisfilteredbyIPaddress.ThispageenablesyoutoconfiguretheIPaddressfilteringrules. 5.2.1 EnablingIPFiltering ToenableIPFiltering,performthefollowingsteps:
1. ChooseSecurity>IPFiltering. 2. 3. ClickSubmit.AsshowninFigure58. SetIPFilteringEnable. Figure58 5.2.2 DisablingIPFiltering TodisableIPFiltering,performthefollowingsteps:
1. ChooseSecurity>IPFiltering. 2. 3. ClickSubmit.AsshowninFigure59. SetIPFilteringDisable. Figure59 5.2.3 SettingAllowaccessnetworkoutsidetherules Tosetallowaccessnetwork,performthefollowingsteps:
1. ChooseSecurity>IPFiltering. 2. 3. ClickSubmit.AsshowninFigure510. SetAllowaccessnetworkoutsidetherules. Figure510 5.2.4 SettingDenyaccessnetworkoutsidetherules Tosetallowaccessnetwork,performthefollowingsteps:
1. ChooseSecurity>IPFiltering. 2. 3. ClickSubmit.AsshowninFigure511. SetDenyaccessnetworkoutsidetherules. Figure511 5.2.5 AddingIPFilteringrule AddanIPaddressfilteringrule,performthefollowingsteps:
1. ChooseSecurity>IPFiltering. 6. 7. 8. 2. ClickAddlist. 3. 4. 5. SetService. SetProtocol. IntheSourceIPAddressRangebox,enterthesourceIPaddressorIPaddresssegmentto befiltered. IntheSourceportrangebox,enterthesourceportorportsegmenttobefiltered. In the Destination IP Address Range box, enter the destination IP address or IP address segmenttobefiltered. In the Destination port Range box, enter the destination port or port segment to be filtered. IntheStatusbox,chooseastatustherulewillbeexecuted. 9. 10. ClickSubmit.AsshowninFigure512. Figure512 5.2.6 ModifyingIPFilteringrule TomodifyanIPfilteringrule,performthefollowingsteps:
1. ChooseSecurity>IPFiltering. 2. Choosetheruletobemodified,andclickEdit. 3. Repeatsteps3through9inthepreviousprocedure. 4. ClickSubmit.AsshowninFigure513. Figure513 5.2.7 DeletingIPFilteringrule TodeleteanIPaddressfilteringrule,performthefollowingsteps:
1. ChooseSecurity>IPFiltering. 2. Choosetheruletobedeleted,andclickDelete.AsshowninFigure514. Figure514 5.3 URLFiltering Dataisfilteredbyuniformresourcelocator(URL).ThispageenablesyoutoconfigureURLfiltering rules. 5.3.1 EnablingURLFiltering ToenableURLFiltering,performthefollowingsteps:
3. ChooseSecurity>URLFiltering. 4. 5. ClickSubmit.AsshowninFigure515. SetURLFilteringtoEnable. Figure515 5.3.2 DisablingURLFiltering TodisableURLFiltering,performthefollowingsteps:
1. ChooseSecurity>URLFiltering. 2. 3. ClickSubmit.AsshowninFigure516. SetURLFilteringtoDisable. Figure516 5.3.3 AddingURLFilteringlist ToaddaURLfilteringlist,performthefollowingsteps:
1. ChooseSecurity>URLFiltering. 2. ClickAddlist. 3. 4. ClickSubmit.AsshowninFigure517. SetURL. Figure517 5.3.4 ModifyURLFilteringlist TomodifyaURLfilteringrule,performthefollowingsteps:
1. ChooseSecurity>URLFiltering. 2. Choosetheruletobemodified,andclickEdit. 3. 4. ClickSubmit.AsshowninFigure518. SetURLaddress. Figure518 5.3.5 DeletingURLFilteringlist TodeleteaURLlist,performthefollowingsteps:
1. ChooseSecurity>URLFiltering. 2. Choosetheitemtobedeleted,andclickDelete.AsshowninFigure519. Figure519 5.4 PortForwarding Whennetworkaddresstranslation(NAT)isenabledontheCPE,onlytheIPaddressonthe WAN side is open to the Internet. If a computer on the LAN is enabled to provide services for the Internet(forexample,workasanFTPserver),portforwardingisrequiredsothatall accessesto theexternalserverportfromtheInternetareredirectedtotheserverontheLAN. 5.4.1 AddingPortForwardingrule Toaddaportforwardingrule,performthefollowingsteps:
1. ChooseSecurity>PortForwarding. 2. ClickAddlist. SetService. SetProtocol. SetRemoteportrange. Theportnumberrangesfrom1to65535. 3. 4. 5. 6. 7. SetLocalhost. SetLocalport. ThisIPaddressmustbedifferentfromtheIPaddressthatissetonthe LAN Host Settings page, but they must be on the same network segment. Theportnumberrangesfrom1to65535. 8. ClickSubmit.AsshowninFigure520. Figure520 5.4.2 ModifyingPortForwardingrule Tomodifyaportforwardingrule,performthefollowingsteps:
1. ChooseSecurity>PortForwarding. 2. Choosetheitemtobemodified,andclickEdit. 3. Repeatsteps3through7inthepreviousprocedure. 4. ClickSubmit.AsshowninFigure521. Figure521 5.4.3 DeletingPortForwardingrule Todeleteaportforwardingrule,performthefollowingsteps:
1. ChooseSecurity>PortForwarding. 2. Choosetheitemtobedeleted,andclickDelete.AsshowninFigure522. Figure522 5.5 UPnP Onthispage,youcanenableordisabletheUniversalPlugandPlay(UPnP)function. ToenableUPnP,performthefollowingsteps:
1. ChooseSecurity>UPnP. 2. SetUPnPtoEnable. 3. ClickSubmit.AsshowninFigure523. Figure523 6 VPNSetting Thisfunctionenablesyoutoconnectthevirtualprivatenetwork(VPN). ToconnecttheVPN,performthefollowingsteps:
1. ChooseVPNSetting. 2. 3. 4. EnterUsernameandPassword. 5. ClickSubmit. 6. YoucanviewthestatusinVPNStatusarea.AsshowninFigure61. IntheVPNSettingarea,enableVPN. SelectaprotocolfromProtocoldropdownlist. Figure61 7 VOIP TheCPEsupportsvoiceservicesbasedontheSessionInitiationProtocol(SIP)andenablesvoice serviceinterworkingbetweentheInternetandPublicSwitchedTelephoneNetworks(PSTNs). 7.1 ViewVOIPInformation ToviewVOIPinformation,performthefollowingsteps:
1. ChooseVOIP>VOIPInformation;
2. ViewtheVOIPinformation,suchastheSIPaccountandstatusoftheSIPregistrationserver. AsshowninFigure71. Figure71 7.2 ConfiguringSIPServer TosettheSIPserverparameters,performthefollowingsteps:
1. ChooseVOIP>SIPServer;
2. IntheUserAgentportbox,entertheportoftheSIPaccountprovidedbyyourservice provider. IntheSIPserverdomainnamebox,enterthedomainnameoftheSIPserver. IntheProxyserveraddressbox,entertheaddressoftheproxyserverprovidedbyyour serviceprovider,forexample,192.168.1.10. IntheProxyserverportbox,entertheportoftheproxyserverprovidedbyyourservice provider,forexample,5060.Thevaluerangesfrom1to65535. In the Registration server address box, enter the address of the registration server providedbyyourserviceprovider,forexample,192.168.1.11. IntheRegistrationserverportbox,entertheportoftheregistrationserverprovidedby yourserviceprovider,forexample,5060.Thevaluerangesfrom1to65535. 3. 4. 5. 6. 7. 8. ClickSubmit.AsshowninFigure72. Figure72 7.3 ConfiguringSIPAccount Before configuring SIP accounts, make sure that the registration server has been properly configured. ToconfigureSIPaccount,performthefollowingsteps:
1. ChooseVoIP>SIPAccount. 2. SetSIPAccountEnable. 3. IntheUsernameandPasswordboxes,entertheusernameandpasswordoftheSIP accountprovidedbyyourserviceprovider. In the Phone Number box, enter the SIP Phone number provided by your service provider. IntheDisplayNamebox,enterthedisplaynameprovidedbyyourserviceprovider. IntheCodecPriorityarea,setthecodecpriority. 5. 6. 7. ClickSubmit.AsshowninFigure73. 4. 8 System 8.1 Maintenance 8.1.1 Reboot Figure73 Thisfunction enablesyoutoreboottheCPE. SettingstakeeffectonlyaftertheCPEreboot. To reboottheCPE,performthefollowingsteps:
1. ChooseSystem>Maintenance. 2. ClickReboot.AsshowninFigure81. TheCPEthenrestarts. Figure81 8.1.2 Reset ThisfunctionenablesyoutorestoretheCPEtoitsdefaultsettings. TorestoretheCPE,performthefollowingsteps:
1. ChooseSystem>Maintenance. 2. ClickReset.AsshowninFigure82. TheCPEisthenrestoredtoitsdefaultsettings. Figure82 8.1.3 BackupConfigurationFile Youcandownloadtheexistingconfigurationfiletobackitup.Todoso:
1. ChooseSystem>Maintenance. 2. ClickDownloadontheMaintenancepage. 3. Inthedisplayeddialogbox,selectthesavepathandnameoftheconfigurationfiletobe backedup. 4. ClickSave.AsshowninFigure83. Theprocedureforfiledownloadingmayvarywiththebrowseryouareusing. Figure83 8.1.4 UploadConfigurationFile YoucanuploadabackedupconfigurationfiletorestoretheCPE.Todoso:
1. ChooseSystem>Maintenance. 2. ClickBrowseontheMaintenancepage. 3. 4. ClickOpen. 5. Thedialogboxchoses.IntheboxtoberightofConfigurationfile,thesavepathandname Inthedisplayeddialogbox,selectthebackedupconfigurationfile. ofthebackedupconfigurationfilearedisplayed. 6. ClickUpload.AsshowninFigure84. TheCPEuploadsthebackedupconfigurationfile.TheCPEthenautomaticallyrestarts. Figure84 8.2 VersionManager ThisfunctionenablesyoutoupgradethesoftwareversionoftheCPEtothelatestversion.Itis recommendedthatyouupgradethesoftwarebecausethenewversion,certainbugshavebeen fixedandthesystemstabilityisusuallyimproved. 8.2.1 ViewingVersionInfo Toviewtheversioninfo,performthefollowingsteps:
1. ChooseSystem>VersionManager. 2. IntheVersionInfoarea,youcanviewtheproductnameandsoftwareversion.Asshownin Figure85. Figure85 8.2.2 VersionUpgrade Toperformanupgradesuccessfully,connecttheCPEtoyourcomputerthroughanetworkcable, savetheupgradefileonthecomputer,andmakesuretheCPEisnotconnectedtoanythingother thanapoweradapterandthecomputer. Toperformanupgrade,performthefollowingsteps:
1. ChooseSystem>VersionManager. 2. IntheVersionUpgradearea,clickBrowse.Inthedisplayeddialogbox,selectthetarget softwareversionfile. 3. ClickOpen.Thedialogboxchoses.Thesavepathandnameofthetargetsoftwareversion filearedisplayedintheUpdatefilefield. 4. ClickSubmit. 5. Thesoftwareupgradestarts.Aftertheupgrade,theCPEautomaticallyrestartsandrunsthe newsoftwareversion.AsshowninFigure86. During an upgrade, do not power off the CPE or disconnect it from the computer. Figure86 8.3 TR069 TR069isastandardforcommunicationbetweenCPEsandtheautoconfigurationserver(ACS). If your service provider uses the TR069 automatic service provision function, the ACS automaticallyprovidestheCPEparameters.IfyousettheACSparametersonboththeCPEand ACS,thenetworkparametersontheCPEareautomaticallysetusingtheTR069function,and youdonotneedtosetotherparametersontheCPE. ToconfiguretheCPEtoimplementtheTR069function,performthefollowingsteps:
1. ChooseSystem>TR069Settings. 2. 3. SetacsURLsource.Therearetwomethods,suchasURLandDHCP. IntheACSURLbox,entertheACSURLaddress. 4. EnterACSusernameandpasswordfortheCPEauthentication. To use theCPE to access theACS, you must provide a user name and passwordfor authentication.Theusernameandthepasswordmustbe thesameasthosedefined ontheACS. IfyousetPeriodicinformtoEnable,setPeriodicinforminterval. 5. 6. Setconnectionrequestusernameandpassword. 7. ClickSubmit.AsshowninFigure88. Figure87 8.4 Date&Time Youcansetthesystemtimemanuallyorsynchronizeitwiththenetwork.If youselect Sync from network, the CPE regularly synchronizes the time with the specified Network Time Protocol(NTP)server.Ifyouenabledaylightsavingtime(DST),theCPEalsoadjuststhe system timeforDST. Tosetthedateandtime,performthefollowingsteps:
1. ChooseSystem>Date&Time. 2. SelectSetmanually. 3. SetLocaltimeorclickSynctoautomaticallyfillinthecurrentlocalsystemtime. 4. ClickSubmit.AsshowninFigure89. Figure88 Tosynchronizethetimewiththenetwork,performthefollowingsteps:
1. ChooseSystem>Date&Time. 2. SelectSyncfromnetwork. 3. FromthePrimaryNTPserverdropdownlist,selectaserverastheprimaryserverfortime synchronization. 4. From the Secondary NTP server dropdown list, select a server as the IP address of the secondaryserverfortimesynchronization. 5. IfyoudontwanttouseotherNTPserver,youneedtoenableOptionalntpserver,andseta serverIPaddress. 6. SetTimezone. 7. ClickSubmit.AsshowninFigure810. Figure89 8.5 DDNS DynamicDomainNameServer(DDNS)serviceisusedtomaptheuser'sdynamicIPaddress toa fixedDNSservice. ToconfigureDDNSsettings,performthefollowingsteps:
1. ChooseSystem>DDNS. 2. SetDDNStoEnable. 3. InServiceprovider,chooseDynDNS.orgororay.com. 4. Enter Domain name and Host name. For example, if the domain name provided by your service provider is test.customtest.dyndns.org, enter customtest.dyndns.org as Domain name,andtestasHostname. 5. EnterUsernameandPassword. 6. ClickSubmit.AsshowninFigure812. Figure810 8.6 Diagnosis IftheCPEisnotfunctioningcorrectly,youcanusethediagnosistoolsontheDiagnosispage to preliminarilyidentifytheproblemsothatactionscanbetakentosolveit. 8.6.1 Ping If the CPE fails to access the Internet, run the ping command to preliminarily identify the problem.Todoso:
1. ChooseSystem>Diagnosis. 2. 3. 4. 5. IntheMethodarea,selectPing. EnterthedomainnameintheTargetIPordomainfield,forexample,www.google.com. SetPacketsizeandTimeout. SetCount. 6. ClickPing.AsshowninFigure813. Waituntilthepingcommandisexecuted.TheexecutionresultsaredisplayedintheResultsbox. Figure811 8.6.2 Traceroute IftheCPEfailstoaccesstheInternet,runtheTraceroutecommandtopreliminarilyidentifythe problem.Todoso:
1. ChooseSystem>Diagnosis. 2. 3. 4. IntheMethodarea,selectTraceroute. EnterthedomainnameintheTargetIPordomainfield.Forexample,www.google.com. SetMaximumhopsadTimeout. 5. ClickTraceroute.AsshowninFigure814. Wait until the traceroue command is executed. The execution results are displayed in the Resultsbox. Figure812 8.7 Syslog Thesyslogrecorduseroperationsandkeyrunningevents. 8.7.1 Local Tosetthesyslogtolocal,performthefollowingsteps:
1. ChooseSystem>Syslog. 2. 3. IntheSettingarea,setthemethodtoLocal. IntheLeveldropdownlist,selectaloglevel. 4. ClickSubmit.AsshowninFigure815. Figure813 Viewinglocalsyslog Toviewthelocalsyslog,performthefollowingsteps:
1. IntheKeywordbox,setakeyword. 2. ClickPull,theresultboxwilldisplay. 8.7.2 Network Tosetthesyslogtonetwork,performthefollowingsteps:
1. ChooseSystem>Syslog. 2. 3. 4. IntheSettingarea,setthemethodtoNetwork. IntheLeveldropdownlist,selectaloglevel. IntheForwardIPaddressbox,setaIPaddress. 5. ClickSubmit.AsshowninFigure816. Thesyslogwilltransmittosomeclienttodisplaythroughnetwork. Figure814 8.8 Account Thisfunctionenablesyoutochangetheloginpasswordoftheuser.Afterthepasswordchanges, enterthenewpasswordthenexttimeyoulogin. Tochangethepassword,performthefollowingsteps:
1. ChooseSystem>Account. 2. Selecttheusername,ifyouwanttochangethepasswordofnormaluser,youneedtoset EnableUserenable. 3. Enterthecurrentpassword,setanewpassword,andconfirmthenewpassword. 4. NewpasswordandConfirmpasswordmustcontain5to15characters. 5. ClickSubmit.AsshowninFigure817. Figure815 8.9 RemoteWEBAccess ToconfiguretheparametersofWEB,performthefollowingsteps:
1. ChooseSystem>RemoteWEBAccess. 2. 3. 4. 5. SetHTTPenable.IfyousetHTTPdisable,youwillcantloginthewebmanagementpage withtheHTTPprotocolfromWANside. SetHTTPport.Ifyouwanttochangetheloginport,youcansetanewportinthebox,the defaultHTTPportis80. SetHTTPSenable.IfyouwanttologinthewebmanagementpagewiththeHTTPSprotocol fromWANside,youneedtoenabletheHTTPS. If you want to login the web management page form the WAN, you need to Enable AllowingloginfromWAN. SettheHTTPSport. 6. 7. ClickSubmit.AsshowninFigure818. Figure816 8.10 Logout Tologoutthewebmanagementpage,performthefollowingsteps:
1. ChooseSystemandclickLogout 2. Itwillbacktotheloginpage. 9 FAQs ThePOWERindicatordoesnotturnon. MakesurethatthepowercableisconnectedproperlyandtheCPEispoweredon. MakesurethatthepoweradapteriscompatiblewiththeCPE. FailstoLogintothewebmanagementpage. MakesurethattheCPEisstarted. VerifythattheCPEiscorrectlyconnectedtothecomputerthroughanetworkcable. Ifthe problempersists,contactauthorizedlocalservicesuppliers. TheCPEfailstosearchforthewirelessnetwork. Checkthatthepoweradapterisconnectedproperly. Check that the CPE is placed in an open area that is far away from obstructions, such as concreteorwooden walls. Check that the CPE is placed far awayfrom household electrical appliances that generate strong electromagneticfield,suchasmicrowaveovens,refrigerators,andsatellitedishes. Iftheproblempersists,contactauthorizedlocalservicesuppliers. ThepoweradapteroftheCPEisoverheated. TheCPEwillbeoverheatedafterbeingusedforalongtime.Therefore,powerofftheCPE whenyouarenot usingit. CheckthattheCPEisproperlyventilatedandshieldedfromdirectsunlight. Theparametersarerestoredtodefaultvalues. IftheCPEpowersoffunexpectedlywhilebeingconfigured,theparametersmayberestored tothedefault settings. Afterconfiguringtheparameters,downloadtheconfigurationfiletoquicklyrestoretheCPE tothedesired settings. FCC Regulations Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevice mustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired operation. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovide reasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalled andusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurina particularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioor televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing measures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Caution Changesormodificationsnotexpresslyapprovedbythemanufacturercouldvoidtheusers authoritytooperatetheequipment. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment.Thisequipmentshouldbeinstalledandoperatedwithaminimumdistanceof20cm betweentheradiatorandanypartofyourbody.Theantennasmustnotbecolocatedwithother transmitterantennas. Thedevicecanonlyoperateindoor,andcannotoperateinoutdoorcondition.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-04-23 | 2510 ~ 2560 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2017-04-23
|
||||
1 2 3 | Applicant's complete, legal business name |
ZTE Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0022602015
|
||||
1 2 3 | Physical Address |
ZTE Plaza, Keji Road South
|
||||
1 2 3 |
Shenzhen, N/A
|
|||||
1 2 3 |
China
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
s******@nemko.com
|
||||
1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
1 2 3 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
1 2 3 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
SRQ
|
||||
1 2 3 | Equipment Product Code |
WF821
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
Y******** G******
|
||||
1 2 3 | Title |
Certification Manager
|
||||
1 2 3 | Telephone Number |
+86-2********
|
||||
1 2 3 | Fax Number |
+86-2********
|
||||
1 2 3 |
g******@zte.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE router | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power listed is EIRP. This device supports LTE bandwidth of 5/10/15/20 MHz in Band 7 and Band 41. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40MHz bandwidth modes. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
TA Technology (Shanghai) Co., Ltd.
|
||||
1 2 3 | Name |
Z****** L********
|
||||
1 2 3 | Telephone Number |
86-21******** Extension:
|
||||
1 2 3 | Fax Number |
86-21********
|
||||
1 2 3 |
l******@ta-shanghai.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 27 | 2510 | 2560 | 0.415 | 0.003 ppm | 18M2G7D | ||||||||||||||||||||||||||||||||||
1 | 2 | 27 | 2510 | 2560 | 0.3698 | 0.004 ppm | 18M3W7D | ||||||||||||||||||||||||||||||||||
1 | 3 | 27 | 2506 | 2680 | 0.5768 | 0.012 ppm | 18M0G7D | ||||||||||||||||||||||||||||||||||
1 | 4 | 27 | 2506 | 2680 | 0.4498 | 0.015 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412 | 2462 | 0.0255 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC MO | 2412 | 2462 | 0.0158 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC