MF920T Quick Start Guide ZTE CORPORATION ZTE Plaza, Keji Road South, Shenzhen, China 1 Getting to Know Your Device Appearance The following figure is for your reference only. 1. Charging/micro-USB jack 2. Indicator light 3. Power key Press and hold for about 3 seconds to power on/off your device. 4. WPS key Press and hold for about 3 seconds to activate the WPS function. 5. SIM card slot and reset hole 2 Getting to Know Your Device Indicator lights Indicator Status Description Red solid /
blinking Green blinking Green solid Light off Blue solid Blue blinking Light off Blue solid Blue blinking Light off The battery is low. Please charge the battery. The battery is being charged. The battery level is middle or high. Your device is not being charged. Wi-Fi is active. WPS is active. Wi-Fi is off. You have unread messages. You have new messages. There is no unread message or new message. Battery Wi-Fi SMS 3 Network Red Green solid Green blinking Blue solid Blue blinking Error status. Not registered to the mobile network, no SIM card inserted or no network service available. Registered to the 2G/3G mobile network. Connected to the 2G/3G mobile network and data is being transferred. Registered to the 4G LTE network. Connected to the 4G LTE network and data is being transferred. 4 Getting to Know Your Device Connection Scenarios The device allows multiple clients to surf on the Internet at the same time. The following figure is for your reference only. A SIM card can be used to access the Internet. 5 Installing g Your Devic ce 1. Open the SI M card cover. NOTE:
e the cover crudely, b because it is connec cted with Do not remove the device. M card to the SIM card d slot. 2. Install a SIM WARNING Your device do or any other no device, do not u
!
oes not support micro on-standard SIM car use those cards or a o-SIM cards, nano-S rds. To avoid damag ny card holders. IM cards ge to the 3. Close the S SIM card cover. 6 Device r other client devic vailable wireless netw abled client device ma or wireless networks our computer to obta es have works. anual for
. If you ain an IP
) of your device, a and click essary, and click OK. Getting to Know th e default Wi-Fi SS he Wi-Fi SID and connected to you r device e. ice with a USB cable ects and perating system dete automatically inst talls the ting to Your Connect Fi Using Wi-F our device. 1. Power on yo t your computer or 2. Ensure that Fi, and search for av enabled Wi-
NOTE: Re fer to your Wi-Fi ena on how to search fo further details er, you need to set yo use a compute atically. address autom 3. Select the Wi-Fi name (SSID) Connect. i-Fi password if nece fer to the chapter G assword to get th 4. Enter the Wi NOTE: Ref SSID and Pa password. he client device is 5. Wait until t successfully
. SB Cable Using a US omputer to your devi 1. Connect a co your device. The op 2. Power on y identifies ne ew hardware, and software. 7 NOTE:
y launch installation, oes not automatically If the system d n icon in My Com he device installatio double-click th ZTEMODEM to
. o install the software. the computer 3. Wait until connected
. successfully Getting t to Know the rd Passwor e Wi-Fi SSID to your is you can mputer >
r device D and vice to get the defa You can view the label on the dev sword. SSID and pass th in Logging he 4G M Configurati Hotspot on Page to ult Wi-Fi obile tween your device and the d enter http://192.16 68.0.1 in ord to log in to the 4G G Mobile and password are ad dmin. 1. Ensure that client device 2. Launch the the address 3. Enter the us Hotspot conf NOTE: The the connection be e is correct. Internet browser and bar. sername and passwo figuration page. e default username a 8 Changing Password the Wi-Fi SSID or 1. Log in to the 4G Mobile Hotspot configuration page. 2. Select Wi-Fi Settings. 3. Change the Network Name (SSID) or the Password in the SSID area. 4. Click Apply. Accessing the Internet After a client device is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic. Operation Your device is automatically connected to the Internet, and you can surf on the Internet through the client. Mode Automatic Manual 1. Log in to the 4G Mobile Hotspot configuration page. 2. In My router section, select LTE (or other network type) Settings > Connection Mode > Manual, and then click Apply. 9 3. Click to return to the hom me page, and then click or
. NOTE:
parameters of your de uration page. evice, log in to the 4G G Mobile ring Your PC C e Internet how to configure the procedure describes Fi connection. ndows 7 for your Wi-F Network and select P Properties. s. nge adapter settings Wireless Network k Connection and rnet Protocol Versi ion 4 (TCP/IPv4), a d select and click ain an IP address r address automatic automatically and d Obtain cally, and click OK. To modify the p Hotspot configu Configur The following p Protocol in Win 1. Right-click N 2. Select Chan 3. Right-click Properties. 4. Select Inter Properties. 5. Select Obta DNS server 10 the device Warning and Notice To the Users If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using if necessary. Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimeters away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary. Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary. Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions. Do not touch the inner antenna area unless necessary. Otherwise the performance of the device may be affected. Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use. Keep the device out of the reach of small children. The device may cause an injury if used as a toy. 11 When the device is operating, do not touch the metallic parts. Failing to do so may cause burns. Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. The device is not waterproof. Keep the device dry and store it in a shady and cool place. Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry. Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged. Only qualified personnel can dismantle and repair the device. An operating temperature between -10C and +60C and humidity between 5% and 95% are recommended. Using Battery Do not change the built-in rechargeable battery in your device by yourself. The battery can only be changed by ZTE or ZTE authorized service provider. Limited Warranty This warranty does not apply to defects or errors in the product caused by:
i. Reasonable abrasion. ii. End users failure to follow ZTEs installation, operation or maintenance instructions or procedures. iii. End users mishandling, misuse, negligence, or improper 12 installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTEs reasonable control. vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations. This warranty is end users sole remedy and ZTEs sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 13 harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment RF Exposure This device was tested for typical body support operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the users body and the device, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic 14 components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. LEGAL INFORMATION Copyright 2016 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: R1.0 Edition Time: June 7, 2016 15 Troubleshooting Problem The connection between your device and a PC through a cable USB cannot be established. The connection between your device and a client through Wi-Fi cannot be established. Recommended Action Install the software, and run the installation program in the path of My Computer. If is abnormal, reinstall the software. You need to uninstall the software first. the driver of your device Ensure that the Wi-Fi function is enabled. Refresh the network list and select the correct SSID. Check the IP address, and ensure that your client can automatically obtain an IP address. Enter the correct network key (Wi-Fi password) when you connect the client to your device. 16 shooting Troubles Check Recommende ed Action t Ensure that your SIM ca available. he location and find a Change th signal. with good th e settings of n mode. connection your service provide Contact y confirm yo our APN settings. e correct address the dress is http://192.16 default add Use only one network adap Enter the ard is a place WAN er and
. The 68.0.1. pter in your PC. Do not use e any proxy server. Problem clien nt The t to connected devic ce the ss cannot acces the Internet. le The Mobi Wi-Fi configuration page canno ot be visited. Getting M More Help You can get he Sending a Visiting w elp by:
an email to mobile@
www.ztedevice.com
@zte.com.cn 17