FCC ID: SRQ-ZTEA52019 LTE/WCDMA/GSM(GPRS) Mutil-Mode Digital Mobile Phone

by: ZTE Corporation latest update: 2019-02-28 model: ZTEA52019

Four grants have been issued under this FCC ID on 02/28/2019 (this is one of one hundred and seventy-two releases in 2019 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked drivers, instructions, troubleshooting guides, warrantee terms, & password defaults.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 41
1 ~ 2019-02-28 16
2 ~ 2019-02-28 22
3 ~ 2019-02-28 17
4 ~ 2019-02-28 11

app s				submitted / available
1 2 3 4	User Manual	Users Manual	pdf	133.13 KiB	February 28 2019
1 2 3 4		Test Setup Photos	pdf		February 28 2019
1 2 3 4		RF Exposure Info	pdf		February 28 2019
1 2 3 4		RF Exposure Info	pdf		February 28 2019
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		RF Exposure Info	pdf		February 28 2019
1 2 3 4		External Photos	pdf		February 28 2019
1 2 3 4		Internal Photos	pdf		February 28 2019
1 2 3 4		ID Label/Location Info	pdf		February 28 2019
1 2 3 4		Cover Letter(s)	pdf		February 28 2019
1 2 3 4		Cover Letter(s)	pdf		February 28 2019
1 2 3 4	OP	Operational Description	pdf		February 28 2019	confidential
1 2 3 4	SCH	Schematics	pdf		February 28 2019	confidential
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		RF Exposure Info	pdf		February 28 2019
1 2 3 4	block-diagrams	Block Diagram	pdf		February 28 2019	confidential
1 2 3 4	BOM	Parts List/Tune Up Info	pdf		February 28 2019	confidential
1 2 3 4	Block Diagram	Block Diagram	pdf		February 28 2019	confidential
1 2 3 4		External Photos	pdf		February 28 2019
1 2 3 4		Cover Letter(s)	pdf		February 28 2019
1 2 3 4		Internal Photos	pdf		February 28 2019
1 2 3 4		ID Label/Location Info	pdf		February 28 2019
1 2 3 4	Operation Description	Operational Description	pdf		February 28 2019	confidential
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		Test Setup Photos	pdf		February 28 2019
1 2 3 4	Tune up procedure-V1.0	Parts List/Tune Up Info	pdf		February 28 2019	confidential
1 2 3 4	Block Diagram	Block Diagram	pdf		February 28 2019	confidential
1 2 3 4		External Photos	pdf		February 28 2019
1 2 3 4		Cover Letter(s)	pdf		February 28 2019
1 2 3 4		Cover Letter(s)	pdf		February 28 2019
1 2 3 4	Operational Description	Operational Description	pdf		February 28 2019	confidential
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		Test Report	pdf		February 28 2019
1 2 3 4		Test Setup Photos	pdf		February 28 2019
1 2 3 4		Cover Letter(s)	pdf		February 28 2019
1 2 3 4		Cover Letter(s)	pdf		February 28 2019
1 2 3 4		Test Report	pdf		February 28 2019

exhibit
download
text

1 2 3 4

User Manual

Users Manual

pdf

133.13 KiB

February 28 2019

ZTE Blade A5 2019 Quick Start Guide 1 LEGAL INFORMATION Copyright 2019 ZTE CORPORATION. All rights reserved. No part of this publication may be quoted, reproduced, translated or used in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. Notice ZTE Corporation reserves the right to make modifications on print errors or update specifications in this guide without prior notice. We offer self-service for our smart terminal device users. Please visit the ZTE official website (at www.ztedevices.com) for more information on self-service and supported product models. Information on the website takes precedence. Disclaimer ZTE Corporation expressly disclaims any liability for faults and damages caused by unauthorized modifications of the software. Images and screenshots used in this guide may differ from the actual product. Content in this guide may differ from the actual product or software. Trademarks ZTE and the ZTE logos are trademarks of ZTE Corporation. Android is a trademark of Google LLC. The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ZTE Corporation is under license. microSDXC Logo is a trademark of SD-3C, LLC. Other trademarks and trade names are those of their respective owners. Version No.: R1.0 Edition Time : December 3, 2018 Manual No.:

2 Earpiece Touch screen Front camera Getting to Know Your Phone

* Supports CTIA headsets only. 3 Back camera Flash Speaker Proximity &

light sensor Indicator light Volume key Power key Headset jack*

Back cover Charging/

micro-USB jack Setting Up Your Phone The nano-SIM card can be installed or removed while the phone is turned on. Power off your phone before removing or replacing the battery.

WARNING!

To avoid damage to the phone, do not use any other kind of SIM cards, or any non-standard nano-SIM card cut from a SIM card. You can get a standard nano-SIM card from your service provider. 1. Insert your fingernail into the slot at the bottom left of the back cover and lift it up gently. 2. Insert the nano-SIM card into the right card slot, and insert the microSDXC card (optional) into the left card slot. 4 3. Insert the battery, making sure the connectors align. 4. Replace the back cover. Charging the Phone Your phones battery should have enough power for the phone to turn on, find a signal, and make a few calls. You should fully charge the battery as soon as possible.

WARNING!

Use only ZTE-approved chargers and USB cables. The use of unapproved accessories could damage your phone or cause the battery to explode. NOTE:

If the battery is extremely low, you may be unable to power on the phone even when it is being charged. In this case, try again after charging the phone for at least 20 minutes. Contact the customer service if you still cannot power on the phone after prolonged charging. 5 Product Safety Information Dont make or receive phone calls while driving. Never text while driving. Keep your phone at least 10 mm away from your body while making calls. Small parts may cause choking. Your phone can produce a loud sound. To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your phone near your ear while the loudspeaker is in use. Avoid contact with anything magnetic. Keep away from pacemakers and other electronic medical devices. Turn off when asked to in hospitals and medical facilities. Turn off when told to on aircraft and at airports. Turn off when near explosive materials or liquids. Dont use at gas stations. Your phone may produce a bright or flashing light. Dont dispose of your phone in fire. Avoid extreme temperatures. Avoid contact with liquids. Keep your phone dry. Do not attempt to disassemble your phone. Only use approved accessories. 6 For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Dont rely on your phone as a primary device for emergency communications. FCC RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. This device is complied with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID:

7 SRQ-ZTEA52019 For this device, the highest reported SAR value for usage against the head is 0.443W/kg, and for usage near the body is 0.585W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 10 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and using such body-worn accessory should be avoided. FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 8 installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 9

		frequency	equipment class	purpose
1	2019-02-28	2402 ~ 2480	DSS - Part 15 Spread Spectrum Transmitter	Original Equipment
2		1710.7 ~ 1754.3	PCE - PCS Licensed Transmitter held to ear
3		2412 ~ 2462	DTS - Digital Transmission System
4			JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s	Applicant Information
1 2 3 4	Effective	2019-02-28
1 2 3 4	Applicant's complete, legal business name	ZTE Corporation
1 2 3 4	FCC Registration Number (FRN)	0022602015
1 2 3 4	Physical Address	ZTE Plaza, Keji Road South
1 2 3 4		Shenzhen, N/A
1 2 3 4		China

app s	TCB Information
1 2 3 4	TCB Application Email Address	c******@micomlabs.com
1 2 3 4	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4		B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 4		A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

app s	FCC ID
1 2 3 4	Grantee Code	SRQ
1 2 3 4	Equipment Product Code	ZTEA52019

app s	Person at the applicant's address to receive grant or for contact
1 2 3 4	Name	Y****** G******
1 2 3 4	Title	Certification Manager
1 2 3 4	Telephone Number	+86-2********
1 2 3 4	Fax Number	+86-2********
1 2 3 4	E-mail	g******@zte.com.cn

app s	Technical Contact
1 2 3 4	Firm Name	TE Corporation
1 2 3 4	Firm Name	ZTE Corporation
1 2 3 4	Physical Address	China
1 2 3 4	E-mail	g******@zte.com.cn

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2 3 4	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4	Is this application for software defined/cognitive radio authorization?	No
1 2 3 4	Equipment Class	DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4		PCE - PCS Licensed Transmitter held to ear
1 2 3 4		DTS - Digital Transmission System
1 2 3 4		JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	LTE/WCDMA/GSM(GPRS) Mutil-Mode Digital Mobile Phone
1 2 3 4	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3 4	Modular Equipment Type	Does not apply
1 2 3 4	Purpose / Application is for	Original Equipment
1 2 3 4	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3 4	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3 4	Grant Comments	Output power listed is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission conditions are 0.09 W/kg, 0.03 W/kg and 0.61 W/kg. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for the operations described in this filing.
1 2 3 4		Power output is ERP for Part 22 and EIRP for Parts 24/27. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory, Product Specific (Wireless Router) and simultaneous transmission conditions are 0.41 W/kg, 0.59 W/kg, 0.59 W/kg and 0.85 W/kg, This device contains functions that are not operational in U.S. Territories; this filing is applicable only for the operations described in this filing.
1 2 3 4		Output power listed is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.0 cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for head, body-worn accessory, Product Specific (Wireless Router) and simultaneous transmission conditions are 0.44W/kg, 0.08W/kg, 0.11W/kg and 0.85W/kg, This device contains functions that are not operational in U.S. Territories; this filing is applicable only for the operations described in this filing.
1 2 3 4	Is there an equipment authorization waiver associated with this application?	No
1 2 3 4	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3 4	Firm Name	CCIC Southern Electronic Product Testing (Shenzhen
1 2 3 4	Name	Z****** Q****
1 2 3 4	Telephone Number	86755********
1 2 3 4	E-mail	z******@ccic-set.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	2402.00000000	2480.00000000	0.0033000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	22H		824.2	848.8	1.652	0.0039 ppm	244KGXW
2	2	22H		824.2	848.8	0.362	0.0034 ppm	245KG7W
2	3	24E		1850.2	1909.8	0.685	0.0043 ppm	245KGXW
2	4	24E		1850.2	1909.8	0.327	0.0037 ppm	246KG7W
2	5	22H		826.4	846.6	0.136	0.004 ppm	4M15F9W
2	6	24E		1852.4	1907.6	0.13	0.0029 ppm	4M15F9W
2	7	27		1712.4	1752.6	0.137	0.0032 ppm	4M15F9W
2	8	24E		1860	1900	0.171	0.025 ppm	17M9G7D
2	9	24E		1860	1900	0.127	0.025 ppm	17M9W7D
2	1	27		1720	1745	0.161	0.013 ppm	17M8G7D
2	11	27		1720	1745	0.112	0.013 ppm	17M8W7D
2	12	27		1712.5	1752.5	0.168	0.013 ppm	4M49G7D
2	13	27		1710.7	1754.3	0.12	0.013 ppm	1M09W7D
2	14	22H		829	844	0.133	0.024 ppm	8M92G7D
2	15	22H		829	844	0.086	0.024 ppm	8M92W7D
2	16	22H		825.5	847.5	0.177	0.024 ppm	2M68G7D
2	17	22H		824.7	848.3	0.125	0.024 ppm	1M09W7D
2	18	27		2510	2560	0.123	0.022 ppm	17M9G7D
2	19	27		2510	2560	0.135	0.022 ppm	17M9W7D
2	2	27		2507.5	2562.7	0.139	0.022 ppm	13M4G7D
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15C	CC	2402	2480	0.0033
3	2	15C	CC	2412	2462	0.043
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
4	1	15B	CC

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BFPZ-E88 Shantou Chenghai District Donghang Toy Factory 2A8SQ-M8 ShenZhen ZhiWei Technology Co., Ltd 2AQL4AAMD4SE4XX01NA Andover Audio LLC 2A7VD-H7137 Shenzhen Qianyan Technology LTD 2A2Y8-FC60B Guangdong Nanguang Photo&Video Systems Co., Ltd.