GOODSPEED AT A GLANCE C 1588 One ae) CONNECTED Per Network signal level Connection type Automatic update Number of connected WLAN devices Battery level Federal Communications Commission (FCC) Notice FCC ID: SRQ-MF900 The device complies with the RF specifications when the device is used at a distance of 1 cm from your body. Ensure that the device accessories such as a device case and a device holster are not composed of metal components. Keep your device 1 cm away from your body to meet the requirement earlier mentioned This device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the independent scientific organization Intemational Commission on Non-lonizing Radiation Protection (ICNIRP) and include safety measures designed to ensure safety for all users, regardless of age and health The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency eneray absorbed by the body when using a device. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is because the device is designed to use the minimum power required to reach the network. The SAR limit adopted by USA and Canada is 1.6 watts/kilogram (Wkg) averaged over one gram of tissue The highest SAR value reported to the FCC and IC for this device type when properly wom on the body is 1.228 Wikg. GOODSPEEDING FOR THE FIRST TIME 1. CREATE YOUR ACCOUNT
Open the browser of your internet device and go to goodspeed.io using your available internet connection. Sign up to your Goodspeed service with your name and e-mail address, 2. ACTIVATE YOUR GOODSPEED DEVICE Sign in to your account and click to the activate device tab, Follow the instructions on the page to complete the activation process. You'll see a confirmation ACTIVATED on the device display once the activation code has been accepted. Your Goodspeed Wi-Fi is now ready for daily use. MANAGE YOUR SERVICE Your account Access your Goodspeed account at goodspeed.io with the details you entered when creating your account, SIM cards Goodspeed uses SIM cards to connect to the internet. You can order destinations from your Goodspeed account. Each destination SIM card is tied to your device and, won't work in any other device. In your Goodspeed account you can:
+ Purchase additional destinations
+ View monthly statements
+ View and change your personal details
+ Change your service plan To add SIMs:
+ Power down your Goodspeed
+ Slide the front cover to remove it
+ Gently push the SIM card to an available slot, or pull the card to remove it.
+ When done, slide the front cover back on.
+ Restart the Goodspeed device. SLIDE TO LT You can also add personal SIM cards to be used with Goodspeed. To add your personal SIM, sign in to your account and follow the instructions on the Devices tab. MF900 Safety and Regulatory Leaflet The CE and FCC markings can be viewe the front cover of the device. See the user guide for instructions on how to do this. Electronic devices, including computers and wireless modems, generate RF ener: tal to their intended function and are therefore subject to FCC rules and regulations. This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, pursuant to part 15 of the FCC Rules These limits are desig against harmful interferer ina normal environment tection GOODSPEED IN DAILY USE
@ Press and hold the power button for 3 sec to power up your Goodspeed device. Wait until CONNECTED appears on your Goodspeed device's display. This takes typically about a minute. In a new country it may take a bit longer. ey To save battery, your Goodspeed device will enter Wi-Fi sleep mode after 10 minutes of inactivity. Push any button to restore the connection, Connect your internet device to the Goodspeed Wi-Fi network using the network name and password visible on your Goodspeed device display. Pe Toggle the menu button until the display shows rene the password and network name. PPLT Lae}
Comer USEFUL HINTS Advanced settings You can access your advanced settings while connected to the Goodspeed Wi-Fi network. Just open your browser and enter http://192,168.0.1 in your browser navigation ber. In the settings you can for example:
+ Change your network name (SSID) and password
+ Change your security settings
+ Adjust Wi-Fi range
+ Adjust Wi-Fi sleep mode settings Software update Your Goodspeed device will update its software automatically. Do not power down your device while the automatic update sign is visible on the display. The device will reboot automatically to install the update, eed, please refer to the help & support This device complies with Part 15 of the Federal Communications Commission (FCC) Rules Operation is subject to the following two conditions:
() This device may not cause harmful interferen
(2) This device must accept any interference received, includ interference that may cause undesired operation. No chang shall be made to the equipment without the manufacturer's permission as this may void the user's authority to operate the equipment, Please follow the instructions included in the user guide for product use. MF900 North America edition is limited using channel 1-11. This limited operation can be only set by software and was done before the product down from the product line. All the products for North America marketing were embedded this limited before shipping. Customers have no way to choose the channel 12 & 13. QUICK GUIDE Boe orcs button for 3 sec to power up Renee nee 2, First time connecting?
Activate the device in your eee er ne cos jump to the next step. Pe esos a appears on the display. eee ey Peconic using the Wi-Fi name and password. Toggle the menu button to change the display.
[coe p USERGUIDE