submitted | available | document details (if available) | source link |
---|---|---|---|
Microsoft Word - MF910L quick start guide V1.7 ls Acrobat Distiller 10.1.0 (Windows) |
various | Users Manual | Users Manual | 320.74 KiB |
MF910L Quick Start Guide ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.China Postcode: 518057 1 to Know You Getting t ce Appearanc ur Device The following fi igure is for your refer rence only. 1. Power Key 2. WPS Key ds to activate the WP SSID and password PS function. d on the LCD and hold for 3 second Press a to view the Wi-Fi S Press
. screen 3. (U)SIM Card d Cover and Reset H 4. LCD Screen 5. Charging/mic cro-USB Jack ole 2 2 ur Device to Know You Getting t Indicators ce is powered on, the When the devic on the LCD s screen. For a descr following table. e following icons may ription of the icons y be displayed
, refer to the Icon Description 2G, 3G, 4G Network signal s strength. Network system m type. The 4G, 3G o or 2G icon is displayed on the e LCD screen depe nding on the connected netwo ork. The user is in ro oaming status. Connected to the e Internet. One or more new w messages are rece eived. Wi-Fi status and d the number of conn ected users. Battery level 3 ur Device Getting t Connectio The device can clients to surf o are for your ref 4G Mode: A to Know You n Scenarios n access the Internet on the Internet at the ference only.
(U)SIM card can be t in two ways and it a e same time. The fol allows multiple lowing figures used to access the I Internet. Internet Wi-
device (such to access connected to NOTE: Yo
-Fi Mode: Your devi h as a hotspot device the Internet. The W o the Internet. ur device and the W ice can be connecte e or wireless router) WLAN device mus ed to a WLAN through Wi-Fi st be already WLAN device must b be in different subnets. 4 4 Installing g Your Devic ce 1. Open the (U
)SIM card cover. NOTE:
the cover rudely, Do not remove because it is co onnected with the device
. 2. Install a (U)S WARNING nano-SIM card damage to the SIM card to the (U)SI G! Your device doe ds or any other no device, do not use th IM card slot. es not support micr on-standard SIM car hose cards or any ca ro-SIM cards, rds. To avoid ard holders. 3. Close the (
U)SIM card cover. 5 Device ting to Your Connect Fi Using Wi-F our device. 1. Power on yo your computer or o 2. Ensure that earch for available w Wi-Fi, and se NOTE: Re efer to your Wi-Fi-e on how to search for further details o computer, you need to set your c automatically. 3. Select the W 4. Enter the Wi NOTE: Refe Password to g 5. Wait until the Wi-Fi name (SSID) of i-Fi password if nece er to the chapter Get get the default Wi-Fi S e client device is conn other client devices wireless networks. enabled client devic r wireless networks. computer to obtain a have enabled ce manual for If you use a an IP address ck Connect. your device, and clic essary, and click OK. tting to Know the W SSID and password. nected to your device Wi-Fi SSID and e successfully. Using a US 1. Connect a co 2. Power on yo new hardwa NOTE:
SB Cable omputer to your devi our device. The opera re, and automatically e. ice with a USB cable ating system detects and identifies y installs the software e. oes not automaticall allation icon in My Co e computer is connec y launch installation, omputer to install the cted to your device s
, you can click e software.. successfully. If the system d the device insta 3. Wait until the 6 6 Getting Passwor to Know th rd he Wi-Fi SS SID and he following methods s to get the default W Wi-Fi SSID and he label on the device e. the WPS Key. The e Wi-Fi SSID and p yed on the screen. password are You can use th password. View th Press display Logging Configur in to the 4 ration Page 4G Mobile Hotspot 1. Ensure that device is cor 2. Launch the http://ufi.zte NOTE: It is
(15.0 or later), Chrome (10.0 o 3. Enter the pa the connection bet rrect. Internet browser edevice.com in the a s recommended that Opera (10.0 or late or later). ssword to log in to th tween your device a and the client and enter http://19 address bar. t you use IE (7.0 or r), Safari (4.0 or late 92.168.0.1 or later), Firefox er), or Google he 4G Mobile Hotspot t configuration page. NOTE: The e default password is s admin. 7 7 Changing the Wi-Fi SSID or Password 1. Log in to the 4G Mobile Hotspot configuration page. 2. Select Settings > Wi-Fi Settings > Basic Settings. 3. Change the Network Name (SSID) or the Pass Phrase
( Password) in the Main SSID area. 4. Click Apply. Accessing the Internet 4G Mode After a client device is successfully connected to your device, you can access the Internet in Automatic or Manual mode. The default mode is Automatic. Mode Automatic Manual Operation Your device is automatically connected to the Internet, and you can surf on the Internet through the client. 1. Log in to the 4G Mobile Hotspot configuration page. 2. Select Settings > Network Settings >
Dial-up Settings > WAN Connection Mode > Manual, and then click Apply. 3. Select Home, and click Connect or Disconnect. 8 NOTE:
To modify the Hotspot configu parameters of your uration page. r device, log in to th he 4G Mobile Internet W 1. Log in to the 2. Select Settin 3. Set the Inte i-Fi Mode e 4G Mobile Hotspot ngs > Internet Wi-Fi rnet Wi-Fi Switch a configuration page. i. and Preferred Netw work, and click Apply. NOTE: Yo Preferred Netw ou need to set Inter work to Wi-Fi. rnet Wi-Fi Switch to o Enable and 4. Connect to t The following tw Select a W pass phra Click Add Hotspot a he Wi-Fi hotspot. your reference. wo methods are for y in the Wi-Fi Hotspot Wi-Fi hotspot listed se text box and click ase in the Pass Phras d, enter the Wi-Fi ho otspot information in y. area, and click Apply t area, enter a Apply. the Add Wi-Fi 9 9 After the client device is connected to the Wi-Fi hotspot successfully, you can access the Internet. Configuring Your PC The following procedure describes how to configure the Internet Protocol in the Windows 7 operating system for your Wi-Fi connection. 1. Right-click Network and select Properties. 2. Select Change adapter settings. 3. Right-click Wireless Network Connection and select Properties. Internet Protocol Version 4 (TCP/IPv4), and click 4. Select Properties. 5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK. 10 Warning and Notice To the Owner If inadequately shielded, some electronic devices, for example, the electronic system of vehicles, may be affected by the electromagnetic interference caused by the device. Consult the manufacturers of such devices before using the device if necessary. Operating the device may interfere with medical instruments such as hearing aids and pacemakers. Always keep the device more than 20 centimeters away from such medical instruments when your device is powered on. Power off the device if necessary. Consult a physician or the manufacturers of medical instruments before using the device if necessary. Be aware of the usage limitation when using the device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off the device if necessary. Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe and obey all warning signs, and power off the device in these conditions. Do not touch the inner antenna area unless necessary. Otherwise the performance of the device may be affected. Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use. Keep the device out of the reach of small children. The device may cause an injury if used as a toy. When the device is operating, do not touch the metallic parts. Failing to do so may cause burns. 11 Warning and Notice To the Users Use original accessories or accessories that are authorized. Using any unauthorized accessories may affect the performance of the device and violate the related national regulations about telecom terminals. Avoid using the device near or inside metallic constructions or establishments that can emit electromagnetic waves, because signal reception may be affected. The device is not waterproof. Keep the device dry and store it in a shady and cool place. Do not use the device immediately after a sudden temperature change, because dew may be generated inside and outside the device. Do not use it until it becomes dry. Handle the device carefully. Do not drop, bend or strike it. Otherwise the device may be damaged. Only qualified personnel can dismantle and repair the device. An operating temperature between -10C and +45C and humidity between 5% and 95% are recommended. Using Battery Do not change the built-in rechargeable battery in your device by yourself. The battery can only be changed by ZTE or ZTE authorized service provider. Limited Warranty This warranty does not apply to defects or errors in the product caused by:
i. Reasonable abrasion. ii. End users failure follow ZTEs maintenance instructions or procedures. to installation, operation or 12 Warning and Notice iii. End users mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the product. iv. Modifications or repairs not provided by ZTE or a ZTE-certified individual. v. Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTEs reasonable control. vi. Usage of third-party products or usage in conjunction with third-party products if such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the product. End users have no right to reject or return the product, or receive a refund for the product from ZTE under the above-mentioned situations. This warranty is end users sole remedy and ZTEs sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 13 interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Body Operation This device was tested for typical body support operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the users body and the device, including the antenna. Third-party belt-clips, holsters, and similar accessories used by 14 this device should not contain any metallic components. Body accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. LEGAL INFORMATION Copyright 2015 ZTE CORPORATION. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice. Version No.: R1.0 Edition Time: May 13, 2015 Manual No.:
15 Troubleshooting Problem The connection between your device and a PC through a cable USB cannot be established. The connection between your device and a client through Wi-Fi cannot be established. Recommended Action run the software, and Install the installation program in the path of My Computer. If the driver of your device is abnormal, reinstall to uninstall the software first. the software. You need Ensure that the Wi-Fi function is enabled. Refresh the network list and select the correct SSID. Check the IP address, and ensure that your client can automatically obtain an IP address. Enter the correct network key (Wi-Fi password) when you connect the client to your device. 16 Troubleshooting Problem client The to connected device the cannot access the Internet. client The cannot access the Internet in Internet Wi-Fi mode. The Mobile Hotspot configuration page cannot be visited. 4G Recommended Action Ensure that your (U)SIM card is available. Change the location and find a place with good signal. Check the settings of the WAN connection mode. Contact your service provider and confirm your APN settings. Ensure that the WLAN device has already been connected to the Internet. Ensure that your device and the WLAN device are in different subnets. Enter the correct address. The default or http://192.168.0.1 address http://ufi.ztedevice.com. is Use only one network adapter in your PC. Do not use any proxy server. 17
This product uses the FCC Data API but is not endorsed or certified by the FCC