| submitted | available | document details (if available) | source link |
|---|---|---|---|
| various | User manual | Users Manual | 520.51 KiB |
User Guide AT&T Cornwall Mobile Hotspot Contents Get Started . 1 Know Your Device . 1 Manage Your Device and Settings . 3 Set Up and Connect to the Internet . 8 Use Your Mobile Hotspot . 14 AT&T Mobile Hotspot Manager Homepage . 14 Security Credentials . 15 View Your Data Usage . 16 Manage Wi-Fi . 17 Message . 23 File Sharing . 24 Battery . 27 Security . 31 Congure Data Network Options . 36 View Details . 37 Replace the SIM Card . 39 Reset the Mobile Hotspot . 41 Advanced Settings . 42 Manage Wi-Fi . 42 Change Advanced Settings . 43 Contents i 2014 AT&T Intellectual Property. All rights reserved. AT&T is a registered trademark of AT&T Intellectual Property. All other marks contained herein are the property of their respective owners. 2014 ZTE Corporation. All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microlm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modications on print errors or update specications without prior notice. microSDHC is a trademark of SD, 3C-LLC. Version No. : V1.0 Edition Time: June 2014 Manual No. : xxxxxxxxxxxx Troubleshooting . 48 Specications . 50 Regulatory and Safety Information. 51 To the Owner . 51 Using Your Device . 52 Using Battery . 52 Radio Frequency (RF) Energy . 53 FCC Compliance. 54 CTIA Requirements . 55 Limited Warranty . 57 Get Started This chapter provides an overview of the Cornwall Mobile Hotspot features, and instructions on how to set up your mobile hotspot and connect to the Internet. Know Your Device Your mobile hotspot enables you to create a Wi-Fi network anywhere there is cellular network coverage. You can use that Wi-Fi network to connect your laptop and other Wi-Fi capable devices to your network providers mobile broadband network and connect to the Internet. You can also use your mobile hotspot by connecting it to your laptop with the USB cable to access the Internet. Additional features include:
Touch screen LCD interface Congure basic Wi-Fi and display settings, view data usage details, view system and network provider messages.
Wi-Fi Protected Setup (WPS) A fast, easy way to connect WPS-enabled devices to your Wi-Fi network.
Guest Wi-Fi Set up a guest Wi-Fi network for temporary users, and use the main network for trusted devices. ii Contents Get Started 1 microSDHC card cover WPS button Power button Touch screen Micro USB charging port SIM card cover/
Reset button Manage Your Device and Settings You can manage your device and change settings using:
The devices LCD touch screen Congure basic Wi-Fi and device settings, and view data usage, and messages.
The AT&T Mobile Hotspot Manager homepage Web user interface for conguring mobile broadband network settings and advanced Wi-Fi and device settings. Note: To personalize the mobile hotspot and change basic settings, use the LCD home screen Settings and Wi-Fi options. For advanced settings, use a Wi-Fi enabled device to connect to the mobile hotspot and then use a browser to display the AT&T Mobile Hotspot Manager homepage (http://att.hotspot). Log in as Administrator to make changes (default Admin Login is attadmin). Power Button Power Button Usage Action Desired Result Power mobile hotspot on Press and hold the Power button. Power mobile hotspot off Press and hold the Power button. Press the Power or WPS button. Wake up the device 2 Get Started Get Started 3 LCD Touch Screen Icons on the LCD screens top row indicate the status of the mobile hotspot, and several screen elements can be tapped or swiped to congure Wi-Fi and device settings, view data usage details, and view carrier messages. LCD Home Screen Elements Icon Indication Network signal strength Network type Network indicator Signal strength New message Wi-Fi network name and Wi-Fi password Wi-Fi network name &
password Tap to view usage details Tap to access WPS, Guest Wi-Fi network, and other options Tap to view messages Battery Tap to change display, le sharing mode, and other settings Used by Wi-Fi enabled devices to connect to the mobile hotspot New message received Data usage for current billing period. Tap the data bar to view detailed information. Battery power indication Wi-Fi menu Number indicates currently connected devices. Tap to congure basic Wi-Fi settings. Settings menu Tap to congure basic device settings. Tap to view carrier messages. 4 Get Started Get Started 5 Accessories
Micro USB cable Used mainly for recharging the battery, although you can also use it to tether the mobile hotspot to your computer.
Wall charger Used with the USB cable to recharge the battery or to power the mobile hotspot from a wall outlet. Micro USB cable Wall charger Charge Your Hotspot You can charge your device by using the USB cable or adapter.
Use the USB cable to connect your device and PC directly.
Use the adapter and USB cable to connect the wall outlet and your device. Status LED Indicator The LED indicates the devices connection status. LED Indicator Patterns Color Green Indicator Blink once Blinking Red Blinking Status When power on Notications New SMS Software update notication Data usage notication Notications No SIM SIM lock SIM PIN/PUK enabled Searching for network No service Limited service 6 Get Started Get Started 7 Set Up and Connect to the Internet Install the Battery Remove the back cover. Insert the battery as shown with the contacts located against the metal springs, and press the battery down into the case. Replace the back cover. Note: The battery comes partially charged and ready to go. When the battery needs recharging, follow the instructions in Recharge the Battery on page 30. Connect to the Internet Power on your device directly. Press and hold the Power button until the screen powers on. Once powered up, the mobile hotspot automatically searches for and connects to your network providers mobile broadband network. Connect your computer or other device to your network. a) Use your normal Wi-Fi application on the client to search for the available wireless network. b) Select the Wi-Fi network name displayed on the mobile hotspot screen, and then click Connect. 8 Get Started Get Started 9 c) Input the Wi-Fi network password, as it displays on the mobile hotspot screen. Launch your browser to surf the Internet. Connect Devices to Your Mobile Hotspots Wi-Fi You can connect up to 10 wireless devices such as smartphones, laptops, tablets, digital cameras, printers, gaming consoles, and digital picture frames to your mobile hotspots Wi-Fi network(s). (See Set Maximum Number of Connected Devices on page 18 for instructions on setting connections for the Main Wi-Fi and Guest Wi-Fi networks.) You can connect:
password.
mobile hotspot and the WPS button on the device. Note: You can also connect a single device directly to the hotspot using the USB cable. Connect a Wireless Device Manually To connect a wireless device to your mobile hotspots Wi-Fi network, see Connect to the Internet on page 9. 10 Get Started Connect a WPS-Enabled Wireless Device If your client device supports WPS, you dont have to input the password manually after WPS has been available. Please do the following:
On the screen:
On the home screen, tap WiFi > Main Wi-Fi Network/Guest Wi-Fi Network. Select WPS. Select Pair with Main Wi-Fi/Pair with Guest Wi-Fi. WPS is a secure way to connect to your hotspot, without entering the SSID password. To use WPS, your device must support WPS. Pair With Main Wi-Fi Press the WPS button on a device you want to connect to your mobile hotspot. Your mobile hotspot and the wireless device will communicate and establish the connection. Get Started 11 On the AT&T Mobile Hotspot Manager homepage:
On your laptop (or other Wi-Fi device), log in to the AT&T Mobile Hotspot Manager homepage by visiting http://att.hotspot or http://192.168.0.1. The default login is attadmin. Click Settings on the navigation menu on the left side. Click Wi-Fi > Basic tab. Choose the WPS method you want to use:
WPS button:
Click WPS Push button, and then within 2 minutes
(120 seconds) press the devices WPS button.
WPS PIN associated with it:
Enter the devices WPS PIN and click Enter WPS PIN. Your mobile hotspot and the wireless device will communicate and establish the connection.
12 Get Started Get Started 13 Use Your Mobile Hotspot This chapter describes the main features of the touch screen and web interfaces for managing your mobile hotspot. AT&T Mobile Hotspot Manager Homepage You must be logged in as Administrator to change settings and view detailed information.
Default homepage URL http://att.hotspot
Default Administrator Login attadmin To log in as Administrator:
On the AT&T Mobile Hotspot Manager homepage, place your cursor in the Login eld and type attadmin (the default Login). Click Login. Security Credentials The mobile hotspot uses three passwords:
Wi-Fi password Used to authenticate wireless devices
(notebook, etc.) to your mobile hotspot network. It is:
the screen is blank (a power-saving feature), press and quickly release the Power button to view the information on the screen.
Change Wi-Fi Network Names and Passwords on page 31.
Guest Wi-Fi Password When enabled, temporary users can use this password to access the Guest Wi-Fi network. If you want to change the Wi-Fi password, see Change Wi-Fi Network Names and Passwords on page 31.
Admin Login Used to log into the AT&T Mobile Hotspot Manager homepage as Administrator. You must be logged in as Administrator to use certain features and to make changes to your mobile hotspot settings. The default Admin Login is attadmin. The Admin Login can be changed to 432 characters. You can change these passwords on the AT&T Mobile Hotspot Manager homepage http://att.hotspot. 14 Use Your Mobile Hotspot Use Your Mobile Hotspot 15 View Your Data Usage You can view estimates of your data usage (not accurate for billing purposes) on the mobile hotspot and the AT&T Mobile Hotspot Manager homepage. Plan data counter resets automatically when the next billing cycle starts. Tap to view usage details To view detailed data usage information:
On the home screen, tap the data usage bar. Detailed billing information displays. On the Data Usage screen, swipe down/up to view all of the details for:
Plan Details for the current billing cycle:
Amount of data used Days remaining in the current cycle The date the next cycle begins
International Roaming:
Amount of data used while roaming internationally 16 Use Your Mobile Hotspot
Current Connection:
Amount of data used in current broadband session Time the connection started Amount of time connection has been active
On the AT&T Mobile Hotspot Manager homepage:
The homepage (http://att.hotspot) shows the data usage for the current billing cycle and for the current broadband session. The data usage information appears for the Billing Cycle and for the current Session. Manage Wi-Fi View Connected Devices You can view a list of devices connected to your mobile hotspot on the mobile hotspot or the AT&T Mobile Hotspot Manager homepage. On the touch screen:
From the touch screen, tap WiFi. Tap Connected Devices. A list of devices connected to the Main Wi-Fi and Guest Wi-Fi networks appears. To view the IP and Mac addresses of one of the devices, tap the device name. Log in as Administrator. On the AT&T Mobile Hotspot Manager homepage:
Use Your Mobile Hotspot 17 Select Connected Devices on the navigation menu on the left side. A list of devices connected to the Main Wi-Fi and Guest Wi-Fi networks appears on the screen. You can view the IP and Mac addresses of the devices. Tap for the Main or Guest Wi-Fi networks. to adjust the number of connections available or Set Maximum Number of Connected Devices You can connect up to 10 wireless devices to the mobile hotspot. These connections are shared between the mobile hotspots Main and Guest Wi-Fi networks. You can customize the distribution of devices from the mobile hotspot or the AT&T Mobile Hotspot Manager homepage. On the touch screen:
From the home screen, tap WiFi. Tap Max Wi-Fi Devices. On the AT&T Mobile Hotspot Manager homepage:
Log in as Administrator. Click Home on the navigation menu on the left side. In the Main and Guest Wi-Fi Max Devices section, select available for the Main or Guest Wi-Fi networks. to adjust the number of connections or Click Apply. 18 Use Your Mobile Hotspot Use Your Mobile Hotspot 19 Block/Unblock Devices Note: Whenever you block or unblock devices, the Wi-Fi radio resets to activate the new settings. Any devices connected to the mobile hotspot will be disconnected when the Wi-Fi radio resets. You can block a device that is currently connected to your mobile hotspot, and it will not be able to connect to your Wi-Fi unless you choose to unblock it. Some reasons that you may want to block a device include:
resulting in charges for overages on your plan).
block/unblock devices from the mobile hotspot or the AT&T Mobile Hotspot Manager homepage. On the touch screen:
To block a connected device:
From the home screen, tap WiFi. Tap Connected Devices. A list of devices connected to the Main Wi-Fi and Guest Wi-Fi networks appears. To block a listed device from connecting to your mobile hotspot, tap the device name. The devices IP and Mac addresses appear. Tap Block. Tap OK. The mobile hotspot will reset and the blocked device will not be able to reconnect to access the Internet. To unblock a device:
From the touch screen, tap WiFi. Tap Connected Devices. A list of devices connected to the Main Wi-Fi and Guest Wi-Fi networks appears. At the bottom of the list (swipe up if required), tap Block List. A list of blocked devices appears. 20 Use Your Mobile Hotspot Use Your Mobile Hotspot 21 To unblock one of these devices so it can connect to your mobile hotspot, tap the device you want to unblock. Tap OK. On the AT&T Mobile Hotspot Manager Homepage:
To block a connected device:
Log in as Administrator. Select Connected Devices. A list of Devices Connected to the Main Wi-Fi and Guest Wi-Fi networks appears on the screen. In the Blocked Wi-Fi device(s) section, the Black List shows all blocked devices. To unblock a listed device so it can connect to your mobile hotspot, select the box for the device and click Apply. To block a listed device from connecting to your mobile hotspot, select the box for the device. Click Apply. To unblock a device:
Select Connected Devices on the navigation menu on the left side. Message View SMS Messages You can view SMS messages on the mobile hotspot or AT&T Mobile Hotspot Manager homepage. On the touch screen:
To view or delete messages:
On the home screen, tap Message (Note: the Messages icon shows the number of unread messages.) A list of messages appears, previewing the rst portion of the text. Tap any message to read the full text. If you want to delete the message, go to the bottom of the message and tap Delete. 22 Use Your Mobile Hotspot Use Your Mobile Hotspot 23 On the AT&T Mobile Hotspot Manager homepage:
To view or delete messages:
Log in as Administrator. Click Messages on the navigation menu on the left side. A list of messages appears. For any message in the list, click the message to read. If you want to delete the message, click the checkboxes in front of the messages and tap Delete. On the AT&T Mobile Hotspot Manager homepage:
Sharing microSDHC card via USB cable:
File Sharing File sharing allows you to share the les on a microSDHC card via USB cable or web browser. On the touch screen:
To set share mode:
On the home screen, tap Settings. Tap File Sharing. Tap Share Mode, and select the desired share mode. Log into the AT&T Mobile Hotspot Manager homepage. Select File Sharing on the navigation menu on the left side to set the sharing mode. The default mode is USB. Connect the device to PC/tablet via USB cable. Go to My Computer of your PC/tablet to access all les on the microSDHC card. Note: You can access the microSDHC card via USB cable only in USB mode. The web page for sharing content on the microSDHC card will be disabled. 24 Use Your Mobile Hotspot Use Your Mobile Hotspot 25 Sharing microSDHC Card via Web Browser Select File Sharing > Settings and then the microSDHC card page is shown as the following gure. Click Access the les on the SD Card on the login window to access the les on the microSDHC card. Select Wi-Fi Share mode. Select Enable to enable share settings. Set File to Share and Access Type. Click Apply to save the settings. Launch the browser on your PC/tablet/smartphone connected to the device via Wi-Fi and enter http://att.hotspot or http://192.168.0.1 in the address bar. Battery Battery Life The mobile hotspot is congured (by default) to optimize battery life. Battery life is affected by:
longer the battery life) Wi-Fi Range
Standard Longest battery life
Extended Range Enables you to have connected Wi-Fi devices further from your mobile hotspot and still connect to your Wi-Fi network, but battery life is shorter 26 Use Your Mobile Hotspot Use Your Mobile Hotspot 27 There are several methods you can use to extend the battery life:
Shorten the Wi-Fi range If the devices you are connecting to your Wi-Fi network are always near the mobile hotspot device, shorten the Wi-Fi range.
Set the Wi-Fi Standby timer to a shorter period Reduce the amount of time to wait when no devices are connected to either Wi-Fi network before going into standby mode
(Wi-Fi radio powers off).
Dim the screen Reduce the LCDs brightness level.
Set the Display Timeout to a shorter period Reduce the amount of time to wait without the LCD being used before the screen goes blank. Extend Battery Life You can choose Wi-Fi and display settings on the mobile hotspot or the AT&T Mobile Hotspot Manager homepage to extend the mobile hotspots battery life. On the touch screen:
On the home screen, tap WiFi. Adjust these settings:
Wi-Fi sleep mode Tap Sleep Mode, and then select a shorter time period. (The shorter the time, the longer the battery life.)
Wi-Fi Range Tap Wi-Fi Range, and then select Short. Go back to the Settings screen, and then tap Display. Adjust these settings:
Brightness Tap Screen Brightness, and then select to adjust the brightness. or
Timeout Tap Display Timeout, and then select a shorter time period. 28 Use Your Mobile Hotspot Use Your Mobile Hotspot 29 On the AT&T Mobile Hotspot Manager homepage:
Log in as Administrator. Click Settings on the navigation menu on the left side. Click Wi-Fi > Advanced Settings tab. Adjust these settings in the Security Settings section:
Wi-Fi Coverage From the drop-down box, select Short.
Sleep mode From the drop-down box, select a shorter time period. Recharge the Battery The battery comes partially charged. You can recharge the battery from a wall outlet or from the USB port on your computer. To recharge the battery from a wall outlet (fastest option):
Attach one end of the micro USB cable to the mobile hotspot and attach the other end to the wall charger (included).
) and an alert is displayed. Plug the wall charger into a wall outlet. The battery icon on the LCD screen indicates when the battery is fully charged (
To recharge the battery from the USB port on your computer:
Attach one end of the micro USB cable to the mobile hotspot and plug the other end into the USB port on your computer. The battery icon on the LCD screen indicates when the battery is fully charged (
Security Change Wi-Fi Network Names and Passwords You can customize the network names and passwords for the Main and Guest Wi-Fi networks on the mobile hotspot or the AT&T Mobile Hotspot Manager homepage.
Main Wi-Fi network Mobile hotspot or AT&T Mobile Hotspot Manager homepage
) and an alert is displayed. 30 Use Your Mobile Hotspot Use Your Mobile Hotspot 31
Guest Wi-Fi network Mobile hotspot or AT&T Mobile Hotspot Manager homepage Change Main Wi-Fi Name and Password You can change the Main Wi-Fi name or password from the mobile hotspot or the AT&T Mobile Hotspot Manager homepage. On the AT&T Mobile Hotspot Manager homepage:
Log in as Administrator. Click Settings on the navigation menu on the left side. Click Wi-Fi > Basic tab. Change the Main Wi-Fi network name and/or password. Change Guest Wi-Fi name and password If you are using the Guest Wi-Fi prole, you can change the Guest Wi-Fi name or password from the AT&T Mobile Hotspot Manager homepage. Note: By default, the Guest Wi-Fi name is the same as the Main Wi-Fi name, with -Guest appended. On the AT&T Mobile Hotspot Manager homepage:
Log in as Administrator. Click Settings on the navigation menu on the left side. Click Wi-Fi > Basic tab. Change the Guest Wi-Fi network name and/or password. Click Apply. Note: If you changed the Wi-Fi network name or password, all connected devices will be disconnected and have to reconnect. Click Apply. 32 Use Your Mobile Hotspot Use Your Mobile Hotspot 33 Change AT&T Mobile Hotspot Manager Homepage Access Settings You can customize the Admin Login used to access the AT&T Mobile Hotspot Manager homepage. On the AT&T Mobile Hotspot Manager homepage:
Log in as Administrator. Click Settings on the navigation menu on the left side. Click Advanced > Administrator tab. Change Wi-Fi Security Types You can set the mobile hotspots Wi-Fi security types in the AT&T Mobile Hotspot Manager homepage. On the AT&T Mobile Hotspot Manager homepage:
Log in as Administrator. Click Settings on the navigation menu on the left side. Click Wi-Fi > Basic tab. Select the desired security types for the Main Wi-Fi and the Guest Wi-Fi networks. (It is recommended that you use WPA-PSK/WPA2-PSK whenever possible.) Security Type (the most common mode):
WPA-PSK/WPA2-PSK other users can access your mobile hotspot only if they enter the correct password (default).
No ENCRYPTION Not recommended. Anyone can access your Wi-Fi network without a password and you are responsible for charges incurred. If desired, change the Admin Login (maximum 32 characters). Click Apply. Note: If you forget the Admin login, you need to perform a hardware reset. 34 Use Your Mobile Hotspot Use Your Mobile Hotspot 35 Touch a network in the network list to register manually. You can also tap the On/Off button beside Select automatically to select preferred network automatically. View Details You can view details about your device such as the wireless number, hardware version, and IMEI on the mobile hotspot or the AT&T Mobile Hotspot Manager homepage. On the touch screen:
From the home screen, tap Settings. Tap About Your Device. Swipe the screen to scroll through the information. On the AT&T Mobile Hotspot Manager homepage:
Log in as Administrator. Click About on the navigation menu on the left side. Click Apply. Reconnect your Wi-Fi devices, if necessary, using the new Wi-Fi credentials. See Connect to the Internet on page 9. Congure Data Network Options You can choose the network types that your mobile hotspot can connect to, and choose whether to allow the mobile hotspot to be used when roaming internationally, from the mobile hotspot or the AT&T Mobile Hotspot Manager homepage. On the touch screen:
From the home screen, tap Settings. Tap International Roaming. Choose the appropriate option:
On/Off button next to International roaming to power international roaming on or off. Touch Search Network to search for all available networks. 36 Use Your Mobile Hotspot Use Your Mobile Hotspot 37 Software Update Software or rmware updates for the mobile hotspot may become available periodically. You will receive an alert when an update becomes available, and you can check for updates manually from the mobile hotspot or from the AT&T Mobile Hotspot Manager homepage. Once an update becomes available, you can load it immediately or postpone installation for up to 12 hours. After 12 hours, the update installs automatically. On the touch screen:
If you read an alert indicating an update is available, you can choose to update now or postpone. Go to step 5. If you want to check for updates manually, from the home screen, tap Settings. Tap AT&T Software Update. Tap check for update. If an update is available:
Update Now to load the update immediately, or
Postpone to wait for 4 hours. An alert will appear after 4 hours reminding you that the update is available. If you are updating now, a message will appear if your mobile hotspots battery is low. Plug your mobile hotspot into your wall charger, and then tap Begin. (This ensures the update will complete without the device shutting off midway through the update.)
Replace the SIM card Your mobile hotspot comes with the SIM card inserted. If you need to replace the SIM card:
Remove the back cover. Remove the battery. Remove the existing SIM card
(if present). 38 Use Your Mobile Hotspot Use Your Mobile Hotspot 39 Insert the SIM card. Insert the battery. Replace the back cover. Reset the Mobile Hotspot You can reset the mobile hotspot to the factory setting on the mobile hotspot or the AT&T Mobile Hotspot Manager homepage. (This is useful if you have lost your Admin Login for the AT&T Mobile Hotspot Manager homepage.) Notes:
If you reset the modem to factory settings, all of your customizations will be lost. If you want to keep them, save them before doing the reset, then restore them afterward.
When you reset the mobile hotspot, any currently connected devices will lose access and will have to be reconnected after the mobile hotspot restarts. On the touch screen:
On the AT&T Mobile Hotspot Manager homepage:
On the home screen, tap Settings. Tap Factory Reset. On the home page, click Settings on the navigation menu on the left side. Click Advanced > Device Reset tab. Click Reset. Click Yes. After the device has reset, reconnect Wi-Fi devices. 40 Use Your Mobile Hotspot Use Your Mobile Hotspot 41 Advanced Settings This chapter provides information on how to congure advanced settings for various aspects of the device such as Wi-Fi settings, WAN settings, router settings, etc. Manage Wi-Fi Set Wi-Fi Network Options To congure the Wi-Fi network options:
On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click Settings on the navigation menu on the left side. Click Wi-Fi > Advanced Settings tab. For the Main Wi-Fi and Guest Wi-Fi networks, select the desired options.
Band Selection The Wi-Fi band range used for the selected network. 2.4 GHz uses less power and is longer ranged than 5 GHz, but 5 GHz can provide higher speeds with less interference.
Network Mode The WLAN protocol being used. The recommended value depends on the band range selected:
Frequency (Channel) The Wi-Fi channel used. The recommended value is Automatic, which chooses the channel that will provide the least interference. Click Apply.
42 Advanced Settings Change Advanced Settings View WAN Information View detailed network information, such as the active network, connection status, signal strength, etc. On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click About. Enable Port Forwarding If your computer hosts a server, you can enable port forwarding so that other users can access the server. To enable port forwarding:
On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click Settings on the navigation menu on the left side. Click Firewall > Port Forwarding tab. Select Enable beside Port Forwarding Settings. The Port Forwarding list will appear. Incoming trafc is forwarded to specic ports and devices on your network (using their local IP addresses). Identify the ports to forward. Enter the port forwarding information (the IP address, the Port range, the Protocol, and the comment), and then click Apply. Caution: Port forwarding creates a security risk. When not required, port forwarding should be disabled. Advanced Settings 43 Enable MAC/IP/Port Filtering You can Enable or Disable the Mac/IP/Port Filtering feature as needed to block certain Internet trafc. If this setting is enabled, you can then choose whether trafc is Accepted or Dropped by default by selecting the appropriate option from the Default Policy drop-down box. To enable port ltering:
On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click Settings on the navigation menu on the left side. Click MAC/IP/Port Filter tab. Select the Default Policy:
Accepted Internet trafc is allowed by default. Only trafc from the selected applications will be blocked from accessing the Internet. Trafc is identied by port numbers. Some applications are pre-dened. You can dene additional applications by clicking the Add Custom Application button, but you need to know details of the trafc used and generated by the applications you wish to dene. In particular, you need to know the port numbers and the protocol (TCP, UDP) used by outgoing trafc.
Dropped Internet trafc is blocked by default. Only trafc from the selected pre-dened or custom applications are allowed to access the Internet.
Click Apply. 44 Enable VPN Passthrough If you want to connect to a corporate network using VPN, you rst need to enable VPN connections (passthrough). To enable VPN passthrough:
On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click Settings on the navigation menu on the left side. Click Advanced > Router tab. In the VPN Passthrough section, select Enable beside VPN Passthrough, and click Apply. Congure APN Details The APN is checked to determine the type of network connection to establish. Your mobile hotspot comes precongured with the APN (Access Point Name) for AT&T. To add an APN for another network:
On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click Settings on the navigation menu on the left side. Click Network > APN tab. Click Add. In the blank line, enter the prole name, APN (obtained from your carrier). Advanced Settings Advanced Settings 45
Select the network Authentication mode. The options are:
None (default)
CHAP
PAP Enter the Username and Password, if these are required for the wireless network. Click Save. To select the APN entry to use:
From the drop-down box beside Prole Selection, select the desired APN to use. Select the APN you want to remove, and click Delete. To remove an APN entry:
Enable DMZ In a DMZ (demilitarized zone) network conguration, a computer runs outside the rewall in the DMZ. This computer intercepts incoming Internet trafc, providing an extra layer of protection for the rest of the network. To enable DMZ and designate a computer to screen incoming trafc:
On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click Settings on the navigation menu on the left side. Click Firewall > DMZ tab. Select Enable beside DMZ. In the DMZ IP Address eld, enter the IP address of the computer you want to have in the DMZ. Click Apply. Set Router Options To set the mobile hotspots LAN options:
On the AT&T Mobile Hotspot Manager homepage, log in as Administrator. Click Settings on the navigation menu on the left side. Click Advanced > Router tab. Enter the desired information in the each section. If the DHCP Server is enabled, it automatically assigns an IP address to each device on the network and manages their conguration information. Click Apply. 46 Advanced Settings Advanced Settings 47 Problem About the password Suggested Solution Select Wi-Fi on the home screen to check the Main/Guest Wi-Fi Network password or check the label on the device to get them. If you changed the password and forgot the new password, you need to restore the device to the factory default settings. Troubleshooting Problem Cannot establish the Wi-Fi connection between your device and client The client connected to the device cannot access the Internet. Cannot visit the web user interface conguration page Suggested Solution Refresh network list and select the correct SSID. Check the IP address to make sure your client can obtain an IP address automatically in the Internet protocol
(TCP/IP) properties. Type the correct network key (Wi-Fi password) when you connect to the device. Make sure your SIM card is available. Change the location to nd a place with good signal. Contact your service provider. Enter the correct address. The default address is http://192.168.0.1 or http://att.hotspot. Only use one network adapter in your PC. Do not use any proxy server. 48 Troubleshooting Troubleshooting 49 Specications Mechanical Specications Weight 130 g 114 x 63 x 17 mm Dimensions 2.4" QVGA TFT LCD Display 240 x 320 pixel Capacitive touch screen 256 MB RAM/512 MB ROM 2800 mAh Memory Battery Supported RF Bands Technology LTE UMTS/HSPA+
Bands Band 2 Band 4 Band 5 Band 17 Band 29 Band 1 Band 2 Band 5 Regulatory and Safety Information To the Owner
interference sent by your device if inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your device before using if necessary.
such as hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are powered on. Power your device off if necessary. Consult a physician or the manufacturer of the medical device before using your device.
at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products being processed. Power off your device if required.
aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and power off your device in these conditions.
Otherwise it will affect your devices performance.
may cause injury if used as a toy.
burn, when your device is working. 50 Specications Regulatory and Safety Information 51 Using Your Device
authorized. Using any unauthorized accessories may affect your devices performance, and violate related national regulations about telecom terminals.
or establishments that can emit electromagnetic waves. Otherwise it may inuence signal reception.
shady and cool place.
temperature change. In such case, it will produce dew inside and outside your device, so dont use it until it becomes dry.
Otherwise your device will be damaged.
technicians can undertake repair work.
Using Battery
heat and re.
avoid explosion.
52 Regulatory and Safety Information
your device and store it in a cool dry place.
appointed recycle place. Do not dispose of the battery in the trash. WARNING! If the battery is broken, keep away from it. If it taints your skin, wash your skin with abundant fresh water and ask doctor for help if necessary. Radio Frequency (RF) Energy This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government:
The exposure standard for wireless mobile devices employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser Regulatory and Safety Information 53 required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the device as reported to the FCC when worn on the body, as described in this user guide, is 1.20 W/kg (Body-worn measurements differ among device models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid/ aft er s ear ching on:
FCC ID: SRQ-MF923 SAR compliance for body operation is based on a separation distance of 10 mm between the unit and the human body. Carry this device, at least 10 mm away from your body to ensure RF exposure level compliant or lower to the reported level. FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate th equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
neiroeR rcnI Connect the equipment into an outlet on a circuit different ease the separation between the equipment and receiver. t or relocate the receiving antenna. from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CTIA Requirements
)a Do not disassemble or open crush, bend or deform, puncture or shred 54 Regulatory and Safety Information Regulatory and Safety Information 55 b) Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to re, explosion or other hazard. c) Only use the battery for the system for which it is specied d) Only use the battery with a charging system that has been qualied with the system per CTIA Certication Requirements for Battery System Compliance to IEEE 1725. Use of an unqualied battery or charger may present a risk of re, explosion, leakage, or other hazard. e) Do not short circuit a battery or allow metallic conductive objects to contact battery terminals. f) Replace the battery only with another battery that has been qualied with the system per this standard, IEEE-Std-1725. Use of an unqualied battery may present a risk of re, explosion, leakage or other hazard. g) Promptly dispose of used batteries in accordance with local regulations h) Battery usage by children should be supervised. i) Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. j) Improper battery use may result in a re, explosion or other hazard. adapters, products that bear the USB-IF logo or products that have completed the USB-IF compliance program. Limited Warranty
Product caused by:
i. Reasonable abrasion. ii. End Users failure to follow ZTEs installation, operation or maintenance instructions or procedures. iii. End Users mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing or operation of the Product. iv. Modications or repairs not made by ZTE or a ZTE-certied individual. v. Power failures, surges, re, ood, accidents, actions of third parties or other events outside ZTEs reasonable control. vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage. vii. Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations. For those host devices that utilize a USB port as a charging source, the host device's user manual shall include a statement that the phone shall only be connected to CTIA certied 56 Regulatory and Safety Information Regulatory and Safety Information 57 Notes
for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied warranties of merchantability and tness for a particular purpose, unless otherwise required under the mandatory provisions of the law. Limitation of Liability ZTE shall not be liable for any loss of prots or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost prots, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost. 58 Regulatory and Safety Information Notes 59
This product uses the FCC Data API but is not endorsed or certified by the FCC