submitted | available | document details (if available) | source link |
---|---|---|---|
September 10 2015 | September 10 2015 |
various | Users Manual-2 | Users Manual | 2.92 MiB | September 10 2015 |
Appendix A Pop-up Windows, JavaScript and Java Permissions Opera Opera 10 screens are used here. Screens for other versions may vary slightly. Allowing Pop-Ups From Opera, click Tools, then Preferences. In the General tab, go to Choose how you prefer to handle pop-ups and select Open all pop-ups. Figure 128 Opera: Allowing Pop-Ups Enabling Java From Opera, click Tools, then Preferences. In the Advanced tab, select Content from the left-
side menu. Select the check boxes as shown in the following screen. EMG3425-Q10A Users Guide 201 Appendix A Pop-up Windows, JavaScript and Java Permissions Figure 129 Opera: Enabling Java To customize JavaScript behavior in the Opera browser, click JavaScript Options. Figure 130 Opera: JavaScript Options Select the items you want Operas JavaScript to apply. EMG3425-Q10A Users Guide 202 APPENDIX B Setting Up Your Computers IP Address Note: Your specific EMG3425-Q10A may not support all of the operating systems described in this appendix. See the product specifications for more information about which operating systems are supported. This appendix shows you how to configure the IP settings on your computer in order for it to be able to communicate with the other devices on your network. Windows Vista/XP/2000, Mac OS 9/
OS X, and all versions of UNIX/LINUX include the software components you need to use TCP/IP on your computer. If you manually assign IP information instead of using a dynamic IP, make sure that your networks computers have IP addresses that place them in the same subnet. In this appendix, you can set up an IP address for:
Windows XP/NT/2000 on page 203 Windows Vista on page 207 Windows 7 on page 211 Mac OS X: 10.3 and 10.4 on page 215 Mac OS X: 10.5 and 10.6 on page 218 Linux: Ubuntu 8 (GNOME) on page 221 Linux: openSUSE 10.3 (KDE) on page 225 Windows XP/NT/2000 The following example uses the default Windows XP display theme but can also apply to Windows 2000 and Windows NT. 1 Click Start > Control Panel. EMG3425-Q10A Users Guide 203 Appendix B Setting Up Your Computers IP Address 2 In the Control Panel, click the Network Connections icon. 3 Right-click Local Area Connection and then select Properties. 4 On the General tab, select Internet Protocol (TCP/IP) and then click Properties. EMG3425-Q10A Users Guide 204 Appendix B Setting Up Your Computers IP Address 5 The Internet Protocol TCP/IP Properties window opens. EMG3425-Q10A Users Guide 205 Appendix B Setting Up Your Computers IP Address 6 7 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. EMG3425-Q10A Users Guide 206 Appendix B Setting Up Your Computers IP Address Windows Vista This section shows screens from Windows Vista Professional. 1 Click Start > Control Panel. 2 In the Control Panel, click the Network and Internet icon. 3 Click the Network and Sharing Center icon. 4 Click Manage network connections. EMG3425-Q10A Users Guide 207 Appendix B Setting Up Your Computers IP Address 5 Right-click Local Area Connection and then select Properties. Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. 6 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. EMG3425-Q10A Users Guide 208 Appendix B Setting Up Your Computers IP Address 7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. EMG3425-Q10A Users Guide 209 Appendix B Setting Up Your Computers IP Address 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided.Click Advanced. 9 Click OK to close the Internet Protocol (TCP/IP) Properties window. 10 Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. EMG3425-Q10A Users Guide 210 Appendix B Setting Up Your Computers IP Address Windows 7 This section shows screens from Windows 7 Enterprise. 1 Click Start > Control Panel. 2 In the Control Panel, click View network status and tasks under the Network and Internet category. 3 Click Change adapter settings. 4 Double click Local Area Connection and then select Properties. EMG3425-Q10A Users Guide 211 Appendix B Setting Up Your Computers IP Address Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. 5 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. EMG3425-Q10A Users Guide 212 Appendix B Setting Up Your Computers IP Address 6 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. EMG3425-Q10A Users Guide 213 Appendix B Setting Up Your Computers IP Address 7 8 9 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click Advanced if you want to configure advanced settings for IP, DNS and WINS. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 3 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. The IP settings are displayed as follows. EMG3425-Q10A Users Guide 214 Appendix B Setting Up Your Computers IP Address Mac OS X: 10.3 and 10.4 The screens in this section are from Mac OS X 10.4 but can also apply to 10.3. 1 Click Apple > System Preferences. 2 In the System Preferences window, click the Network icon. EMG3425-Q10A Users Guide 215 Appendix B Setting Up Your Computers IP Address 3 When the Network preferences pane opens, select Built-in Ethernet from the network connection type list, and then click Configure. 4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP tab. EMG3425-Q10A Users Guide 216 Appendix B Setting Up Your Computers IP Address 5 For statically assigned settings, do the following:
From the Configure IPv4 list, select Manually. In the IP Address field, type your IP address. In the Subnet Mask field, type your subnet mask. In the Router field, type the IP address of your device. 6 Click Apply Now and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network Interface from the Info tab. EMG3425-Q10A Users Guide 217 Appendix B Setting Up Your Computers IP Address Figure 131 Mac OS X 10.4: Network Utility Mac OS X: 10.5 and 10.6 The screens in this section are from Mac OS X 10.5 but can also apply to 10.6. 1 Click Apple > System Preferences. 2 In System Preferences, click the Network icon. EMG3425-Q10A Users Guide 218 Appendix B Setting Up Your Computers IP Address 3 When the Network preferences pane opens, select Ethernet from the list of available connection types. 4 From the Configure list, select Using DHCP for dynamically assigned settings. EMG3425-Q10A Users Guide 219 Appendix B Setting Up Your Computers IP Address 5 For statically assigned settings, do the following:
From the Configure list, select Manually. In the IP Address field, enter your IP address. In the Subnet Mask field, enter your subnet mask. In the Router field, enter the IP address of your EMG3425-Q10A. 6 Click Apply and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network interface from the Info tab. EMG3425-Q10A Users Guide 220 Appendix B Setting Up Your Computers IP Address Figure 132 Mac OS X 10.5: Network Utility Linux: Ubuntu 8 (GNOME) This section shows you how to configure your computers TCP/IP settings in the GNU Object Model Environment (GNOME) using the Ubuntu 8 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default Ubuntu 8 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in GNOME:
1 Click System > Administration > Network. 2 When the Network Settings window opens, click Unlock to open the Authenticate window. (By default, the Unlock button is greyed out until clicked.) You cannot make changes to your configuration unless you first enter your admin password. EMG3425-Q10A Users Guide 221 Appendix B Setting Up Your Computers IP Address 3 In the Authenticate window, enter your admin account name and password then click the Authenticate button. 4 In the Network Settings window, select the connection that you want to configure, then click Properties. EMG3425-Q10A Users Guide 222 Appendix B Setting Up Your Computers IP Address 5 The Properties dialog box opens. In the Configuration list, select Automatic Configuration (DHCP) if you have a dynamic IP address. In the Configuration list, select Static IP address if you have a static IP address. Fill in the IP address, Subnet mask, and Gateway address fields. 6 7 Click OK to save the changes and close the Properties dialog box and return to the Network Settings screen. If you know your DNS server IP address(es), click the DNS tab in the Network Settings window and then enter the DNS server information in the fields provided. EMG3425-Q10A Users Guide 223 Appendix B Setting Up Your Computers IP Address 8 Click the Close button to apply the changes. Verifying Settings Check your TCP/IP properties by clicking System > Administration > Network Tools, and then selecting the appropriate Network device from the Devices tab. The Interface Statistics column shows data if your connection is working properly. EMG3425-Q10A Users Guide 224 Appendix B Setting Up Your Computers IP Address Figure 133 Ubuntu 8: Network Tools Linux: openSUSE 10.3 (KDE) This section shows you how to configure your computers TCP/IP settings in the K Desktop Environment (KDE) using the openSUSE 10.3 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default openSUSE 10.3 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in the KDE:
1 Click K Menu > Computer > Administrator Settings (YaST). EMG3425-Q10A Users Guide 225 Appendix B Setting Up Your Computers IP Address 2 When the Run as Root - KDE su dialog opens, enter the admin password and click OK. 3 When the YaST Control Center window opens, select Network Devices and then click the Network Card icon. EMG3425-Q10A Users Guide 226 Appendix B Setting Up Your Computers IP Address 4 When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. 5 When the Network Card Setup window opens, click the Address tab EMG3425-Q10A Users Guide 227 Appendix B Setting Up Your Computers IP Address Figure 134 openSUSE 10.3: Network Card Setup 6 7 8 Select Dynamic Address (DHCP) if you have a dynamic IP address. Select Statically assigned IP Address if you have a static IP address. Fill in the IP address, Subnet mask, and Hostname fields. Click Next to save the changes and close the Network Card Setup window. If you know your DNS server IP address(es), click the Hostname/DNS tab in Network Settings and then enter the DNS server information in the fields provided. EMG3425-Q10A Users Guide 228 Appendix B Setting Up Your Computers IP Address 9 Click Finish to save your settings and close the window. Verifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Connection Information. Figure 135 openSUSE 10.3: KNetwork Manager When the Connection Status - KNetwork Manager window opens, click the Statistics tab to see if your connection is working properly. EMG3425-Q10A Users Guide 229 Appendix B Setting Up Your Computers IP Address Figure 136 openSUSE: Connection Status - KNetwork Manager EMG3425-Q10A Users Guide 230 APPENDIX C Common Services The following table lists some commonly-used services and their associated protocols and port numbers. For a comprehensive list of port numbers, ICMP type/code numbers and services, visit the IANA (Internet Assigned Number Authority) web site. Name: This is a short, descriptive name for the service. You can use this one or create a different one, if you like. Protocol: This is the type of IP protocol used by the service. If this is TCP/UDP, then the service uses the same port number with TCP and UDP. If this is USER-DEFINED, the Port(s) is the IP protocol number, not the port number. Port(s): This value depends on the Protocol. Please refer to RFC 1700 for further information about port numbers. If the Protocol is TCP, UDP, or TCP/UDP, this is the IP port number. If the Protocol is USER, this is the IP protocol number. Description: This is a brief explanation of the applications that use this service or the situations in which this service is used. Table 81 Commonly Used Services NAME AH
(IPSEC_TUNNEL) AIM/New-ICQ PROTOCOL User-Defined TCP AUTH BGP BOOTP_CLIENT BOOTP_SERVER CU-SEEME DNS ESP
(IPSEC_TUNNEL) FINGER FTP H.323 HTTP TCP TCP UDP UDP TCP UDP TCP/UDP User-Defined TCP TCP TCP TCP TCP PORT(S) 51 5190 113 179 68 67 7648 24032 53 50 79 20 21 1720 80 DESCRIPTION The IPSEC AH (Authentication Header) tunneling protocol uses this service. AOLs Internet Messenger service. It is also used as a listening port by ICQ. Authentication protocol used by some servers. Border Gateway Protocol. DHCP Client. DHCP Server. A popular videoconferencing solution from White Pines Software. Domain Name Server, a service that matches web names (for example www.zyxel.com) to IP numbers. The IPSEC ESP (Encapsulation Security Protocol) tunneling protocol uses this service. Finger is a UNIX or Internet related command that can be used to find out if a user is logged on. File Transfer Program, a program to enable fast transfer of files, including large files that may not be possible by e-mail. NetMeeting uses this protocol. Hyper Text Transfer Protocol - a client/server protocol for the world wide web. EMG3425-Q10A Users Guide 231 Appendix C Common Services Table 81 Commonly Used Services (continued) NAME HTTPS PROTOCOL TCP PORT(S) 443 ICMP User-Defined 1 ICQ IGMP (MULTICAST) UDP User-Defined IKE UDP IRC MSN Messenger TCP/UDP TCP NEW-ICQ NEWS NFS NNTP PING POP3 PPTP TCP TCP UDP TCP User-Defined TCP TCP 4000 2 500 6667 1863 5190 144 2049 119 1 110 1723 PPTP_TUNNEL
(GRE) User-Defined 47 RCMD REAL_AUDIO TCP TCP REXEC RLOGIN RTELNET RTSP SFTP SMTP TCP TCP TCP TCP/UDP TCP TCP SNMP SNMP-TRAPS TCP/UDP TCP/UDP 512 7070 514 513 107 554 115 25 161 162 DESCRIPTION HTTPS is a secured http session often used in e-
commerce. Internet Control Message Protocol is often used for diagnostic or routing purposes. This is a popular Internet chat program. Internet Group Management Protocol is used when sending packets to a specific group of hosts. The Internet Key Exchange algorithm is used for key distribution and management. This is another popular Internet chat program. Microsoft Networks messenger service uses this protocol. An Internet chat program. A protocol for news groups. Network File System - NFS is a client/server distributed file service that provides transparent file sharing for network environments. Network News Transport Protocol is the delivery mechanism for the USENET newsgroup service. Packet INternet Groper is a protocol that sends out ICMP echo requests to test whether or not a remote host is reachable. Post Office Protocol version 3 lets a client computer get e-mail from a POP3 server through a temporary connection (TCP/IP or other). Point-to-Point Tunneling Protocol enables secure transfer of data over public networks. This is the control channel. PPTP (Point-to-Point Tunneling Protocol) enables secure transfer of data over public networks. This is the data channel. Remote Command Service. A streaming audio service that enables real time sound over the web. Remote Execution Daemon. Remote Login. Remote Telnet. The Real Time Streaming (media control) Protocol
(RTSP) is a remote control for multimedia on the Internet. Simple File Transfer Protocol. Simple Mail Transfer Protocol is the message-
exchange standard for the Internet. SMTP enables you to move messages from one e-mail server to another. Simple Network Management Program. Traps for use with the SNMP (RFC:1215). EMG3425-Q10A Users Guide 232 Appendix C Common Services Table 81 Commonly Used Services (continued) NAME SQL-NET PROTOCOL TCP PORT(S) 1521 SSH STRM WORKS SYSLOG TCP/UDP UDP UDP TACACS TELNET TFTP UDP TCP UDP 22 1558 514 49 23 69 VDOLIVE TCP 7000 DESCRIPTION Structured Query Language is an interface to access data on many different types of database systems, including mainframes, midrange systems, UNIX systems and network servers. Secure Shell Remote Login Program. Stream Works Protocol. Syslog allows you to send system logs to a UNIX server. Login Host Protocol used for (Terminal Access Controller Access Control System). Telnet is the login and terminal emulation protocol common on the Internet and in UNIX environments. It operates over TCP/IP networks. Its primary function is to allow users to log into remote host systems. Trivial File Transfer Protocol is an Internet file transfer protocol similar to FTP, but uses the UDP
(User Datagram Protocol) rather than TCP
(Transmission Control Protocol). Another videoconferencing solution. EMG3425-Q10A Users Guide 233 APPENDIX D Legal Information Copyright Copyright 2015 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimers ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice. Your use of the EMG3425-Q10A is subject to the terms and conditions of any related service providers. Trademarks Trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners. Regulatory Notice and Statement UNITED STATE AMERICA 1 2 1 2 3 4 The following information applies if you use the product within USA area. FCC EMC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment or devices. Connect the equipment to an outlet other than the receiver's. Consult a dealer or an experienced radio/TV technician for assistance. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be at least 21 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. CANADA The following information applies if you use the product within Canada area. Industry Canada ICES statement CAN ICES-3 (B)/NMB-3(B) EMG3425-Q10A Users Guide 234 Appendix D Legal Information Industry Canada RSS-GEN & RSS-247 statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter(2468C-EMG3425Q10A) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. If you use 5G in the product, please pay attention to the following:
(i) the device for operation in the band 5150-5250 MHz is for indoor use only in order to reduce the potential for harmful interference to co-channel mobile satellite systems. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (2468C-EMG3425Q10A) de modle s'il fait partie du matriel de catgorieI) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Si vous utilisez le produit avec 5G sans fil fonction, suivant l'attention doit tre verse que,
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Industry Canada radiation exposure statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 21 cm between the radiator and your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl.Cet quipement doit tre install et utilis avec un minimum de 21 cm de distance entre la source de rayonnement et votre corps. EUROPEAN UNION The following information applies if you use the product within the European Union. Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance information for 2.4GHz and/or 5GHz wireless products relevant to the EU and other Countries following the EU Directive 1999/
5/EC (R&TTE).
(Bulgarian) ZyXEL , 1999/5/C. Espaol
(Spanish) etina
(Czech) Por medio de la presente ZyXEL declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ZyXEL tmto prohlauje, e tento zazen je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/EC. Dansk (Danish) Undertegnede ZyXEL erklrer herved, at flgende udstyr udstyr overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch
(German) Eesti keel
(Estonian)
(Greek) English Franais
(French) Hrvatski
(Croatian) slenska
(Icelandic) Italiano
(Italian) Hiermit erklrt ZyXEL, dass sich das Gert Ausstattung in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EU befindet. Kesolevaga kinnitab ZyXEL seadme seadmed vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. ZyXEL 1999/5/C. Hereby, ZyXEL declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Par la prsente ZyXEL dclare que l'appareil quipements est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/EC. ZyXEL ovime izjavljuje da je radijska oprema tipa u skladu s Direktivom 1999/5/EC. Hr me lsir, ZyXEL v yfir a essi bnaur er samrmi vi grunnkrfur og nnur vieigandi kvi tilskipunar 1999/5/EC. Con la presente ZyXEL dichiara che questo attrezzatura conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. EMG3425-Q10A Users Guide 235 Appendix D Legal Information Latvieu valoda
(Latvian) Ar o ZyXEL deklar, ka iekrtas atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi kalba
(Lithuanian) iuo ZyXEL deklaruoja, kad is ranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Magyar
(Hungarian) Alulrott, ZyXEL nyilatkozom, hogy a berendezs megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EK irnyelv egyb elrsainak. Malti (Maltese) Hawnhekk, ZyXEL, jiddikjara li dan tagmir jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Nederlands
(Dutch) Hierbij verklaart ZyXEL dat het toestel uitrusting in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EC. Polski (Polish) Niniejszym ZyXEL owiadcza, e sprzt jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus
(Portuguese) ZyXEL declara que este equipamento est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/EC. Romn
(Romanian) Slovenina
(Slovak) Slovenina
(Slovene) Suomi
(Finnish) Svenska
(Swedish) Prin prezenta, ZyXEL declar c acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 1999/5/EC. ZyXEL tmto vyhlasuje, e zariadenia spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/EC. ZyXEL izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/EC. ZyXEL vakuuttaa tten ett laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar ZyXEL att denna utrustning str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EC. Norsk
(Norwegian) Erklrer herved ZyXEL at dette utstyret er I samsvar med de grunnleggende kravene og andre relevante bestemmelser I direktiv 1999/5/EF. National Restrictions This product may be used in all EU countries (and other countries following the EU Directive 2014/53/EU) without any limitation except for the countries mentioned below:
Ce produit peut tre utilis dans tous les pays de lUE (et dans tous les pays ayant transposs la directive 2014/53/UE) sans aucune limitation, except pour les pays mentionns ci-dessous:
Questo prodotto utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttiva 2014/53/UE) senza nessuna limitazione, eccetto per i paesii menzionati di seguito:
Das Produkt kann in allen EU Staaten ohne Einschrnkungen eingesetzt werden (sowie in anderen Staaten die der Richtlinie 2014/53/EU folgen) mit Aunahme der folgenden aufgefhrten Staaten:
In the majority of the EU and other European countries, the 2.4GHz and 5GHz bands have been made available for the use of wireless local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. ZyXEL recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4GHz and 5GHz wireless LANs. The following countries have restrictions and/or requirements in addition to those given in the table labeled Overview of Regulatory Requirements for Wireless LANs:. Belgium The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens. Les liaisons sans fil pour une utilisation en extrieur dune distance suprieure 300 mtres doivent tre notifies lInstitut Belge des services Postaux et des Tlcommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples dtails. Denmark In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark m frekvensbndet 5150 - 5350 ogs anvendes udendrs. Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a general authorization. Please check http://www.sviluppoeconomico.gov.it/ for more details. Questo prodotto conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una Autorizzazione Generale. Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli. Latvia The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://
www.esd.lv for more details. 2.4 GHz frekvenu joslas izmantoanai rpus telpm nepiecieama atauja no Elektronisko sakaru direkcijas. Vairk informcijas: http://
www.esd.lv. EMG3425-Q10A Users Guide 236 Appendix D Legal Information Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 2014/53/EU has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used(specified in dBi) to the output power available at the connector (specified in dBm). List of national codes COUNTRY Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Latvia ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE AT BE BG HR CY CR DK EE FI FR DE GR HU IS IE IT LV Liechtenstein Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Romania Serbia Slovakia Slovenia Spain Sweden Switzerland Turkey United Kingdom LI LT LU MT NL NO PL PT RO RS SK SI ES SE CH TR GB Safety Warnings DO NOT use this product near water, for example, in a wet basement or near a swimming pool. DO NOT expose your device to dampness, dust or corrosive liquids. DO NOT store things on the device. DO NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. DO NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information. Make sure to connect the cables to the correct ports. Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). DO NOT remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to a power outlet. DO NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. If the power adaptor or cord is damaged, remove it from the device and the power source. DO NOT use the device if the power adaptor or cord is damaged as it might cause electrocution. DO NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one. DO NOT use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. CAUTION: RISK OF EXPLOSION IF BATTERY (on the motherboard) IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Dispose them at the applicable collection point for the recycling of electrical and electronic equipment. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product. DO NOT obstruct the device ventilation slots, as insufficient airflow may harm your device. The following warning statements apply, where the disconnect device is not incorporated in the equipment or where the plug on the power supply cord is intended to serve as the disconnect device, for PERMANENTLY CONNECTED EQUIPMENT, a readily accessible disconnect device shall be incorporated external to the equipment;
for PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. EMG3425-Q10A Users Guide 237 Appendix D Legal Information European Union - Disposal and Recycling Information WEEE Directive The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic waste. If this product is end of life, take it to a recycling station designated by local authorities. At the time of disposal, the separate collection of your product and/or its battery will help save natural resources and ensure that the environment is sustainable development. Die folgende Symbol bedeutet, dass Ihr Produkt und/oder seine Batterie gem den rtlichen Bestimmungen getrennt vom Hausmll entsorgt werden muss. Wenden Sie sich an eine Recyclingstation, wenn dieses Produkt das Ende seiner Lebensdauer erreicht hat. Zum Zeitpunkt der Entsorgung wird die getrennte Sammlung von Produkt und/oder seiner Batterie dazu beitragen, natrliche Ressourcen zu sparen und die Umwelt und die menschliche Gesundheit zu schtzen. El smbolo de abajo indica que segn las regulaciones locales, su producto y/o su batera debern depositarse como basura separada de la domstica. Cuando este producto alcance el final de su vida til, llvelo a un punto limpio. Cuando llegue el momento de desechar el producto, la recogida por separado ste y/o su batera ayudar a salvar los recursos naturales y a proteger la salud humana y medioambiental. Le symbole ci-dessous signifie que selon les rglementations locales votre produit et/ou sa batterie doivent tre limins sparment des ordures mnagres. Lorsque ce produit atteint sa fin de vie, amenez-le un centre de recyclage. Au moment de la mise au rebut, la collecte spare de votre produit et/ou de sa batterie aidera conomiser les ressources naturelles et protger l'environnement et la sant humaine. Il simbolo sotto significa che secondo i regolamenti locali il vostro prodotto e/o batteria deve essere smaltito separatamente dai rifiuti domestici. Quando questo prodotto raggiunge la fine della vita di servizio portarlo a una stazione di riciclaggio. Al momento dello smaltimento, la raccolta separata del vostro prodotto e/o della sua batteria aiuta a risparmiare risorse naturali e a proteggere l'ambiente e la salute umana. Symbolen innebr att enligt lokal lagstiftning ska produkten och/eller dess batteri kastas separat frn hushllsavfallet. Nr den hr produkten nr slutet av sin livslngd ska du ta den till en tervinningsstation. Vid tiden fr kasseringen bidrar du till en bttre milj och mnsklig hlsa genom att gra dig av med den p ett tervinningsstlle. EMG3425-Q10A Users Guide 238 Appendix D Legal Information Environmental Product Declaration EMG3425-Q10A Users Guide 239 Appendix D Legal Information Viewing Certifications Go to http://www.zyxel.com to view this products documentation and certifications. ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. Note Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought the device at http://www.zyxel.com/web/support_warranty_info.php. Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com. Open Source Licenses This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are provided with the firmware package. You can download the latest firmware at www.zyxel.com. If you cannot find it there, contact your vendor or ZyXEL Technical Support at support@zyxel.com.tw. To obtain the source code covered under those Licenses, please contact your vendor or ZyXEL Technical Support at support@zyxel.com.tw. EMG3425-Q10A Users Guide 240 APPENDIX E Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you bought the device. Regional websites are listed below. See also http://www.zyxel.com/about_zyxel/zyxel_worldwide.shtml. Please have the following information ready when you contact an office. Required Information Product model and serial number. Warranty Information. Date that you received your device. Brief description of the problem and the steps you took to solve it. Corporate Headquarters (Worldwide) Taiwan ZyXEL Communications Corporation http://www.zyxel.com Asia China ZyXEL Communications (Shanghai) Corp. ZyXEL Communications (Beijing) Corp. ZyXEL Communications (Tianjin) Corp. http://www.zyxel.cn India ZyXEL Technology India Pvt Ltd http://www.zyxel.in Kazakhstan ZyXEL Kazakhstan http://www.zyxel.kz EMG3425-Q10A Users Guide 241 Appendix E Customer Support Korea ZyXEL Korea Corp. http://www.zyxel.kr Malaysia ZyXEL Malaysia Sdn Bhd. http://www.zyxel.com.my Pakistan ZyXEL Pakistan (Pvt.) Ltd. http://www.zyxel.com.pk Philipines ZyXEL Philippines http://www.zyxel.com.ph Singapore ZyXEL Singapore Pte Ltd. http://www.zyxel.com.sg Taiwan ZyXEL Communications Corporation http://www.zyxel.com Thailand ZyXEL Thailand Co., Ltd http://www.zyxel.co.th Vietnam ZyXEL Communications Corporation-Vietnam Office http://www.zyxel.com/vn/vi Europe Austria ZyXEL Deutschland GmbH http://www.zyxel.de Belarus ZyXEL BY http://www.zyxel.by EMG3425-Q10A Users Guide 242 Appendix E Customer Support Belgium ZyXEL Communications B.V. http://www.zyxel.com/be/nl/
Bulgaria ZyXEL http://www.zyxel.com/bg/bg/
Czech ZyXEL Communications Czech s.r.o http://www.zyxel.cz Denmark ZyXEL Communications A/S http://www.zyxel.dk Estonia ZyXEL Estonia http://www.zyxel.com/ee/et/
Finland ZyXEL Communications http://www.zyxel.fi France ZyXEL France http://www.zyxel.fr Germany ZyXEL Deutschland GmbH http://www.zyxel.de Hungary ZyXEL Hungary & SEE http://www.zyxel.hu Latvia ZyXEL Latvia http://www.zyxel.com/lv/lv/homepage.shtml EMG3425-Q10A Users Guide 243 Appendix E Customer Support Lithuania ZyXEL Lithuania http://www.zyxel.com/lt/lt/homepage.shtml Netherlands ZyXEL Benelux http://www.zyxel.nl Norway ZyXEL Communications http://www.zyxel.no Poland ZyXEL Communications Poland http://www.zyxel.pl Romania ZyXEL Romania http://www.zyxel.com/ro/ro Russia ZyXEL Russia http://www.zyxel.ru Slovakia ZyXEL Communications Czech s.r.o. organizacna zlozka http://www.zyxel.sk Spain ZyXEL Spain http://www.zyxel.es Sweden ZyXEL Communications http://www.zyxel.se Switzerland Studerus AG http://www.zyxel.ch/
EMG3425-Q10A Users Guide 244 Appendix E Customer Support Turkey ZyXEL Turkey A.S. http://www.zyxel.com.tr UK ZyXEL Communications UK Ltd. http://www.zyxel.co.uk Ukraine ZyXEL Ukraine http://www.ua.zyxel.com Latin America Argentina ZyXEL Communication Corporation http://www.zyxel.com/ec/es/
Ecuador ZyXEL Communication Corporation http://www.zyxel.com/ec/es/
Middle East Egypt ZyXEL Communication Corporation http://www.zyxel.com/homepage.shtml Middle East ZyXEL Communication Corporation http://www.zyxel.com/homepage.shtml North America USA ZyXEL Communications, Inc. - North America Headquarters http://www.us.zyxel.com/
EMG3425-Q10A Users Guide 245 Appendix E Customer Support Oceania Africa Australia ZyXEL Communications Corporation http://www.zyxel.com/au/en/
South Africa Nology (Pty) Ltd. http://www.zyxel.co.za EMG3425-Q10A Users Guide 246 A ActiveX 122 Address Assignment 58 AP 12 AP Mode menu 35 status screen 33 AP+Bridge 12 B Bridge/Repeater 12 C certifications viewing 240 Channel 26, 34 channel 69 CIFS 166 Common Internet File System, see CIFS Configuration restore 182 contact information 241 content filtering by keyword (in URL) 127 Cookies 122 copyright 234 CoS 143 CoS technologies 134 CPU usage 27, 35 customer support 241 Index Index D DDNS 109 see also Dynamic DNS service providers 109, 124 DHCP 52, 94 DHCP server see also Dynamic Host Configuration Protocol DHCP server 89, 94 Differentiated Services, see DiffServ 143 DiffServ 143 marking rule 143 Digital Living Network Alliance 165 disclaimer 234 DLNA 164, 165 indexing 167 overview 164 rescan 167 DLNA-compliant client 165 DNS 96 DNS Server 58 DNS server 96 documentation related 2 Domain Name System 96 Domain Name System. See DNS. DS field 143 DS, dee differentiated services DSCP 143 duplex setting 27, 35 Dynamic DNS 109 Dynamic Host Configuration Protocol 94 DynDNS 109, 124 DynDNS see also DDNS 109, 124 E encryption 70 and local (user) database 71 EMG3425-Q10A Users Guide 247 key 71 WPA compatible 71 ESSID 191 F FCC interference statement 234 file sharing 165 access right 168, 170 bandwidth 170 example 170 FTP 169 overview 165 Samba 167 user account 168, 169 Windows Explorer 167 work group 167 Firewall 118 Firewall overview guidelines 118 ICMP packets 119 network security Stateful inspection 118 firewall stateful inspection 117 Firmware upload 180 file extension using HTTP firmware version 26, 34 G General wireless LAN screen 73 Guest WLAN 71 Guest WLAN Bandwidth 72 Guide Quick Start 2 Index IGMP version 59 Internet Group Multicast Protocol 59 IP Address 90, 91, 102 IP alias 89 IP Pool 95 J Java 122 L LAN 88 IP pool setup 89 LAN overview 88 LAN setup 88 LAN TCP/IP 89 Language 183 Link type 27, 35 local (user) database 70 and encryption 71 Local Area Network 88 M MAC 81 MAC address 58, 70 cloning 58 MAC address filter 70 MAC address filtering 81 MAC filter 81 managing the device good habits 14 using the web configurator. See web configurator. using the WPS. See WPS. I IGMP 59 see also Internet Group Multicast Protocol version MBSSID 12 Media access control 81 media client 164 media file 164, 167 type 167 media server 164 EMG3425-Q10A Users Guide 248 overview 164 meida file play 164 Memory usage 27, 35 mode 12 Multicast 59 IGMP 59 N NAT 99, 102 global 100 how it works 101 inside 100 local 100 outside 100 overview 99 port forwarding 106 see also Network Address Translation server 100 server sets 106 NAT Traversal 158 Navigation Panel 27, 35 navigation panel 27, 35 Network Address Translation 99, 102 O operating mode 12 other documentation 2 P Per-Hop Behavior, see PHB 143 PHB 143 Point-to-Point Protocol over Ethernet 60 Pool Size 95 Port forwarding 102, 106 default server 102, 106 example 106 local server 102 port numbers services Index port speed 27, 35 PPPoE 60 dial-up connection product registration 240 Q QoS 133, 143 marking 134 setup 133 tagging 134 versus CoS 133 Quality of Service (QoS) 83 Quality of Service, see QoS Quick Start Guide 2 R RADIUS server 70 registration product 240 related documentation 2 Remote management and NAT 148 limitations 147 system timeout 148 Reset button 14 Reset the device 14 Restore configuration 182 Roaming 83 Router Mode status screen 24 RTS/CTS Threshold 69, 83 S Samba 166 Scheduling 86 Server Message Block, see SMB Service and port numbers 121 Service Set 73, 80 EMG3425-Q10A Users Guide 249 Index W Wake On LAN 154 WAN (Wide Area Network) 57 WAN MAC address 58 warranty 240 note 240 Web Configurator how to access 19 Overview 19 web configurator 13 Web Proxy 123 WEP Encryption 76 windows media player 164 Wireless association list 54 wireless channel 191 wireless LAN 191 wireless LAN scheduling 86 Wireless network basic guidelines 69 channel 69 encryption 70 example 68 MAC address filter 70 overview 68 security 69 SSID 69 Wireless security 69 overview 69 type 69 wireless security 191 Wireless tutorial 38 WLAN button 15 WoL 154 work group 166 name 166 Windows 166 WPA compatible 71 WPS 13 Service Set IDentification 73, 80 Service Set IDentity. See SSID. Single Rate Three Color Marker, see srTCM SMB 166 srTCM 145 SSID 26, 34, 69, 73, 80 stateful inspection firewall 117 Static DHCP 95 Static Route 111 Status 24 Subnet Mask 90, 91 Summary DHCP table 52 Packet statistics 53 Wireless station status 54 System General Setup 176 System restart 183 T TCP/IP configuration 94 Time setting 178 trademarks 234 trigger port 107 Trigger port forwarding 107 example 107 process 107 trTCM 145 Two Rate Three Color Marker, see trTCM U Universal Plug and Play 158 Application 158 Security issues 158 UPnP 158 USB media sharing 164 user authentication 70 local (user) database 70 RADIUS server 70 User Name 110 EMG3425-Q10A Users Guide 250
This product uses the FCC Data API but is not endorsed or certified by the FCC