app
s
|
Applicant Information
|
|
1 2 3 4
|
Effective |
2020-05-29
|
1 2 3 4
|
2017-02-21
|
1 2 3 4
|
Applicant's complete, legal business name |
Hui Zhou Gaoshengda Technology Co.,LTD
|
1 2 3 4
|
FCC Registration Number (FRN) |
0023889280
|
1 2 3 4
|
Physical Address |
NO.75 Zhongkai Development Area
|
1 2 3 4
|
Huizhou, Guangdong, N/A
|
1 2 3 4
|
China
|
|
app
s
|
TCB Information
|
1 2 3 4
|
TCB Application Email Address |
T******@intertek.com
|
1 2 3 4
|
c******@micomlabs.com
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4
|
Grantee Code |
2AC23
|
1 2 3 4
|
Equipment Product Code |
WC0HR2601
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4
|
Name |
H******** G********
|
1 2 3 4
|
Telephone Number |
+86-0********
|
1 2 3 4
|
Fax Number |
+86-0********
|
1 2 3 4
|
E-mail |
g******@gaosd.cn
|
|
app
s
|
Technical Contact
|
1 2 3 4
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
1 2 3 4
|
Teleconformity
|
1 2 3 4
|
Name |
B**** L****
|
1 2 3 4
|
M******** K********
|
1 2 3 4
|
Physical Address |
16/F, Block A, Building 6, Baoneng Science and Tec
|
1 2 3 4
|
Rietven 31
|
1 2 3 4
|
Shenzhen, 518109
|
1 2 3 4
|
Enschede
|
1 2 3 4
|
China
|
1 2 3 4
|
Netherlands
|
1 2 3 4
|
Telephone Number |
0755-******** Extension:
|
1 2 3 4
|
31 84********
|
1 2 3 4
|
Fax Number |
0755-********
|
1 2 3 4
|
E-mail |
b******@uttlab.com
|
1 2 3 4
|
m******@teleconformity.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
1 2 3 4
|
Name |
B**** L******
|
1 2 3 4
|
Physical Address |
16/F, Block A, Building 6, Baoneng Science and Tec
|
1 2 3 4
|
Shenzhen, 518109
|
1 2 3 4
|
China
|
1 2 3 4
|
Telephone Number |
0755-******** Extension:
|
1 2 3 4
|
Fax Number |
0755-********
|
1 2 3 4
|
E-mail |
b******@uttlab.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 | DTS - Digital Transmission System |
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI Module |
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 | Original Equipment |
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 | Grant Comments | Class II Permissive Change. Output power listed is conducted. This grant is valid only when the device is sold to OEM integrators. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multitransmitter procedures. The module shall be only used with the integral antennas that has been originally tested and certified with this module. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20MHz, 40MHz and 80MHz bandwidth modes. |
1 2 3 4 | Class II Permissive Change. Output power listed is average conducted. This grant is valid only when the device is sold to OEM integrators. Colocation of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module shall be only used with the integral antennas that has been originally tested and certified with this module. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20MHz and 40MHz
bandwidth modes. |
1 2 3 4 | Modular Approval. Power Output listed is Conducted. This grant is valid only when the
device is sold to OEM integrators. The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antennas that has been originally tested and certified with this module. A distance of 20 cm shall be maintained between the antenna and users. The OEM integrator is responsible for testing the end-product for any
additional compliance requirements required with this module.
Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements. |
1 2 3 4 | Modular Approval. Power Output listed is the maximum combined conducted output power. Device is a 2x2 MIMO, as described within this filing. This grant is valid only when the device is sold to OEM integrator. The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antennas that has been originally tested and certified with this module. A distance of 20 cm shall be maintained between the antenna and users. The OEM integrator is responsible for testing the end-product for any additional compliance requirements required with this module. Users and installers must be provided with product operating instructions and applicable warnings to satisfy RF exposure compliance requirements.
Device supports 20/40/80 MHz bandwidth modes. |
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
1 2 3 4
|
Shenzhen ATL Testing Technology Co., Ltd.
|
1 2 3 4
|
Name |
G******** L****
|
1 2 3 4
|
S****** W****
|
1 2 3 4
|
Telephone Number |
+86-7********
|
1 2 3 4
|
086-0********
|
1 2 3 4
|
Fax Number |
086-0********
|
1 2 3 4
|
E-mail |
q******@uttlab.com
|
1 2 3 4
|
a******@163.com
|
|