|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2017-12-21
|
|
1 2 3
|
Applicant's complete, legal business name |
Hui Zhou Gaoshengda Technology Co.,LTD
|
|
1 2 3
|
FCC Registration Number (FRN) |
0023889280
|
|
1 2 3
|
Physical Address |
NO.75 Zhongkai Development Area
|
|
1 2 3
|
Huizhou, Guangdong, N/A
|
|
1 2 3
|
China
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
t******@cetecom.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AC23
|
|
1 2 3
|
Equipment Product Code |
WT38M2001
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
H****** G****
|
|
1 2 3
|
Telephone Number |
+86-0********
|
|
1 2 3
|
Fax Number |
+86-0********
|
|
1 2 3
|
E-mail |
g******@gaosd.cn
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | DTS - Digital Transmission System |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI+BT Module |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Original Equipment |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Output Power listed is average conducted.
Single Modular Approval for mobile RF Exposure condition.
This device supports 802.11a and 802.11n with a 20 MHz and 40 MHz bandwidth mode.
Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| 1 2 3 | Output power listed is peak conducted.
Single Modular Approval for mobile RF Exposure condition.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| 1 2 3 | Output power listed is peak conducted.
Single Modular Approval for mobile RF Exposure condition.
This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.
Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
BTL Inc.
|
|
1 2 3
|
Name |
S**** H****
|
|
1 2 3
|
Telephone Number |
86-76******** Extension:
|
|
1 2 3
|
Fax Number |
86-76********
|
|
1 2 3
|
E-mail |
s******@newbtl.com
|
|