app
s
|
Applicant Information
|
|
various
|
Effective |
2023-06-09
|
various
|
2023-01-12
|
various
|
2020-01-27
|
various
|
2019-05-15
|
various
|
Applicant's complete, legal business name |
BSH Home Appliances Corporation
|
various
|
FCC Registration Number (FRN) |
0028230084
|
various
|
Physical Address |
1901 Main Street Suite 600
|
various
|
1901 Main Street
|
various
|
Irvine, California 92614
|
various
|
Irvine, CA
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
b******@phoenix-testlab.de
|
various
|
B******@phoenix-testlab.de
|
various
|
h******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
2AHES
|
various
|
Equipment Product Code |
SMB
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
M**** J****** M******
|
various
|
Title |
Compliance Engineer
|
various
|
Telephone Number |
252-6********
|
various
|
Fax Number |
949-8********
|
various
|
E-mail |
m******@bshg.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
CSA Group Bayern GmbH
|
various
|
Name |
C**** J********
|
various
|
Physical Address |
Ohmstr. 1-4
|
various
|
Strasskirchen, 94342
|
various
|
Germany
|
various
|
Telephone Number |
+4994********
|
various
|
94249********
|
various
|
94249******** Extension:
|
various
|
E-mail |
c******@csagroup.org
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Communication Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Limited Single Modular Approval |
various | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Class II Permissive Change |
various | Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/25/2018 |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power output listed is conducted. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters.
C2PC: This modular approved transmitter is mounted on a new specific host PCB (Systemmaster SME) with a new circuit trace antenna design and PCB antennas with antenna switch (diversity). Only for this dedicated usage the composite DSS (Bluetooth BR and EDR) is disabled by firmware. Modular type remains LMA because the device is used exclusively for usage in home appliances manufactured by the Grantee and will not be marketed to any third party. |
various | Power output listed is conducted. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. Class II permissive change to integrate the module onto a specific host PCB with a new circuit trace antenna design and output power settings as defined in the filing. The antenna circuit trace layout design must be in strict compliance with the OEM instructions provided.
C2PC: This modular approved transmitter is mounted on a new specific host PCB (Systemmaster SME) with a new circuit trace antenna design and PCB antennas with antenna switch (diversity). Only for this dedicated usage the composite DSS (Bluetooth BR and EDR) is disabled by firmware. Modular type remains LMA because the device is used exclusively for usage in home appliances manufactured by the Grantee and will not be marketed to any third party. |
various | Power output listed is conducted. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. Class II permissive change to integrate the module onto a specific host PCB with a new circuit trace antenna design and output power settings as defined in the filing. The antenna circuit trace layout design must be in strict compliance with the OEM instructions provided.
C2PC: This modular approved transmitter is mounted on a new specific host PCB with a new circuit trace antenna design and PCB antennas with antenna switch (diversity). For this usage the composite DSS (Bluetooth BR and EDR) is disabled by firmware and the power settings adopted. Modular type remains LMA because the device is used exclusively for usage in home appliances manufactured by the Grantee and will not be marketed to any third party. |
various | Power output listed is conducted. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. Class II permissive change to integrate the module onto a specific host PCB with a new circuit trace antenna design and output power settings as defined in the filing. The antenna circuit trace layout design must be in strict compliance with the OEM instructions provided.
C2PC: This modular approved transmitter is mounted on a new specific host PCB with a new circuit trace antenna design and PCB antennas with antenna switch (diversity). For this usage the composite DSS (Bluetooth BR and EDR) is disabled by firmware and the power settings adopted. Modular type remains LMA because the device is used exclusively for usage in home appliances manufactured by the Grantee and will not be marketed to any third party. |
various | Power output listed is conducted. Limited Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters.
Class II permissive change to integrate the module onto a specific host PCB with a new circuit trace antenna design and output power settings as defined in the filing. The antenna circuit trace layout design must be in strict compliance with the OEM instructions provided. |
various | Power output listed is conducted. Limited Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes.
Class II permissive change to integrate the module onto a specific host PCB with a new circuit trace antenna design and output power settings as defined in the filing. The antenna circuit trace layout design must be in strict compliance with the OEM instructions provided. |
various | Power output listed is conducted. Limited Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters.
Class II permissive change to integrate the module onto a specific host PCB with a new circuit trace antenna design and output power settings as defined in the filing. The antenna circuit trace layout design must be in strict compliance with the OEM instructions provided. |
various | Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters. |
various | Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes. |
various | Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
CSA Group Bayern GmbH
|
various
|
CTK Co., Ltd.
|
various
|
MRT Technology (Suzhou) Co., Ltd.
|
various
|
Name |
F******** S****
|
various
|
Y******** P********
|
various
|
M******** C******
|
various
|
Telephone Number |
49-94********
|
various
|
82-31********
|
various
|
+86-5******** Extension:
|
various
|
Fax Number |
49-94********
|
various
|
82-31********
|
various
|
E-mail |
f******@csagroup.org
|
various
|
j******@e-ctk.com
|
various
|
m******@mrt-cert.com
|
|