app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2021-02-18
|
1 2 3 4 5 6
|
2020-01-22
|
1 2 3 4 5 6
|
2019-04-02
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Qingdao Intelligent&Precise Electronics Co.,Ltd
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0023954829
|
1 2 3 4 5 6
|
0025785783
|
1 2 3 4 5 6
|
Physical Address |
No218,Qianwangang Road Qingdao Economic&Technological Development Zone
|
1 2 3 4 5 6
|
No218,Qianwangang Road
|
1 2 3 4 5 6
|
266071
|
1 2 3 4 5 6
|
Qingdao, N/A
|
1 2 3 4 5 6
|
Qingdao, N/A 266071
|
1 2 3 4 5 6
|
China
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
h******@acbcert.com
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
2AJVQ
|
1 2 3 4 5 6
|
Equipment Product Code |
7618BUC
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
C******** L******
|
1 2 3 4 5 6
|
Title |
Engineer
|
1 2 3 4 5 6
|
Telephone Number |
53280********
|
1 2 3 4 5 6
|
Fax Number |
53286********
|
1 2 3 4 5 6
|
E-mail |
l******@hisense.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6
|
Firm Name |
Intertek Testing Services Shanghai
|
1 2 3 4 5 6
|
Intertek Testing Services Limited Shanghai
|
1 2 3 4 5 6
|
Name |
E****** L****
|
1 2 3 4 5 6
|
N**** L****
|
1 2 3 4 5 6
|
W****** Z****
|
1 2 3 4 5 6
|
Physical Address |
Building No.86, 1198 Qinzhou Road(North)
|
1 2 3 4 5 6
|
Shanghai, 200233
|
1 2 3 4 5 6
|
Shanghai
|
1 2 3 4 5 6
|
China
|
1 2 3 4 5 6
|
Telephone Number |
86 21********
|
1 2 3 4 5 6
|
86 21********
|
1 2 3 4 5 6
|
Fax Number |
86 21********
|
1 2 3 4 5 6
|
E-mail |
e******@intertek.com
|
1 2 3 4 5 6
|
n******@intertek.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Module |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 | Original Equipment |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz and 40 MHz bandwidth modes.
This device contains a 5GHz WLAN transmitter. |
1 2 3 4 5 6 | This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
This device contains a 2.4GHz WLAN transmitter. |
1 2 3 4 5 6 | This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
This device contains a 2.4G WLAN transmitter. |
1 2 3 4 5 6 | This is a C2PC application. Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz and 40 MHz bandwidth modes.
This device contains a 5G WLAN transmitter. |
1 2 3 4 5 6 | Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20 MHz and 40 MHz bandwidth modes. This device contains 5G WLAN transmitter. |
1 2 3 4 5 6 | Power Output listed is Conducted. Single Modular Approval. Device is an 802.11n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is granted for use in Mobile only configurations in which the antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains 2.4G WLAN transmitter. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Intertek Testing Services Shanghai
|
1 2 3 4 5 6
|
Name |
L**** X******
|
1 2 3 4 5 6
|
Telephone Number |
+86 2********
|
1 2 3 4 5 6
|
E-mail |
l******@intertek.com
|
|