app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2021-02-19
|
1 2 3 4 5 6
|
2019-05-23
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Qingdao Intelligent&Precise Electronics Co.,Ltd
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0023954829
|
1 2 3 4 5 6
|
0025785783
|
1 2 3 4 5 6
|
Physical Address |
No218,Qianwangang Road Qingdao Economic&Technological Development Zone
|
1 2 3 4 5 6
|
No218,Qianwangang Road
|
1 2 3 4 5 6
|
266071
|
1 2 3 4 5 6
|
Qingdao, N/A
|
1 2 3 4 5 6
|
Qingdao, 266071
|
1 2 3 4 5 6
|
Qingdao, N/A 266071
|
1 2 3 4 5 6
|
China
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
h******@acbcert.com
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
2AJVQ
|
1 2 3 4 5 6
|
Equipment Product Code |
7668AUC
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
C******** L******
|
1 2 3 4 5 6
|
Title |
Engineer
|
1 2 3 4 5 6
|
Telephone Number |
53280********
|
1 2 3 4 5 6
|
Fax Number |
53286********
|
1 2 3 4 5 6
|
E-mail |
l******@hisense.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6
|
Firm Name |
Intertek Testing Services Shanghai
|
1 2 3 4 5 6
|
Name |
E****** L********
|
1 2 3 4 5 6
|
E******** L****
|
1 2 3 4 5 6
|
N**** L******
|
1 2 3 4 5 6
|
Physical Address |
Building No.86, 1198 Qinzhou Road(North)
|
1 2 3 4 5 6
|
Shanghai, 200233
|
1 2 3 4 5 6
|
China
|
1 2 3 4 5 6
|
Telephone Number |
86-21********
|
1 2 3 4 5 6
|
86 21********
|
1 2 3 4 5 6
|
Fax Number |
86-21********
|
1 2 3 4 5 6
|
86 21********
|
1 2 3 4 5 6
|
E-mail |
e******@intertek.com
|
1 2 3 4 5 6
|
n******@intertek.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | DTS - Digital Transmission System |
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Module |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 | Original Equipment |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | This is a C2PC application. Power Output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing and it contains 2.4G WLAN and Bluetooth/BLE transmitters. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz WLAN operations as described in this filing, but the Bluetooth and WIFI can support simultaneous transmission. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
1 2 3 4 5 6 | This is a C2PC application. Power Output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing and it contains 5G WLAN and Bluetooth/BLE transmitters. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz WLAN operations as described in this filing, but the Bluetooth and WIFI can support simultaneous transmission. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
1 2 3 4 5 6 | This is a C2PC application. Power Output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device contains BLE, 2.4GHz and 5GHz WLAN transmitters. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
1 2 3 4 5 6 | Power Output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This transmitter has 20MHz and 40MHz bandwidth modes as described in this filing and it contains 5G WLAN and Bluetooth/BLE transmitters. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz WLAN operations as described in this filing, but the Bluetooth and WIFI can support simultaneous transmission. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
1 2 3 4 5 6 | Power Output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing and it contains 2.4G WLAN and Bluetooth/BLE transmitters. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz WLAN operations as described in this filing, but the Bluetooth and WIFI can support simultaneous transmission. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
1 2 3 4 5 6 | Power Output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device contains BLE, 2.4GHz and 5GHz WLAN transmitters. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Intertek Testing Services Limited, Shanghai
|
1 2 3 4 5 6
|
Intertek Testing Services Shanghai
|
1 2 3 4 5 6
|
Name |
L**** X******
|
1 2 3 4 5 6
|
Telephone Number |
+86 2********
|
1 2 3 4 5 6
|
E-mail |
l******@intertek.com
|
|