app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2023-06-29
|
1 2 3 4 5
|
2020-09-21
|
1 2 3 4 5
|
2019-06-17
|
1 2 3 4 5
|
2019-06-14
|
1 2 3 4 5
|
2019-06-06
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Nordic Semiconductor ASA
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0026827089
|
1 2 3 4 5
|
Physical Address |
Otto Nielsens vei 12
|
1 2 3 4 5
|
Trondheim, N/A 7052
|
1 2 3 4 5
|
Trondheim, N/A
|
1 2 3 4 5
|
Norway
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
a******@dekra.com
|
1 2 3 4 5
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
1 2 3 4 5
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
2ANPO
|
1 2 3 4 5
|
Equipment Product Code |
00NRF9160
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
K******** A******
|
1 2 3 4 5
|
Title |
Application Engineer
|
1 2 3 4 5
|
Telephone Number |
+4772********
|
1 2 3 4 5
|
Fax Number |
+4772********
|
1 2 3 4 5
|
E-mail |
k******@nordicsemi.no
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/25/2023 |
1 2 3 4 5 | 03/20/2021 |
1 2 3 4 5 | 12/03/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | PCB - PCS Licensed Transmitter |
1 2 3 4 5 | CXX - Communications Rcvr for use w/ licensed Tx and CBs |
1 2 3 4 5 | JAB - Part 15 Class B Digital Device |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PCS Licensed Transmitter |
1 2 3 4 5 | IOT Module |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 | Class II Permissive Change |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | Output power listed is conducted.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
Maximum antenna gains for mobile operation to comply with MPE and EIRP limits are 9.0 dBi for LTE FDD 2 frequency band, 6.0 dBi for LTE FDD 4 frequency band, 10.41 dBi for LTE FDD 5 frequency band, 10.78 dBi for LTE FDD band 8 frequency band, 9.7 dBi for LTE FDD 12 frequency band, 10.16 dBi for LTE FDD 13 frequency band, 10.22 dBi for LTE FDD 14 frequency band, 9.73 dBi for LTE FDD 17 frequency band, 9.0 dBi for LTE FDD 25 frequency band, 10.36 dBi for LTE FDD 26 frequency band and 6.0 dBi for LTE FDD 66 frequency band.
Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.
Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations
C2PC filing to add band 8 according to USA requirements. |
1 2 3 4 5 | Output power listed is conducted.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance.
The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 9.0 dBi for LTE FDD 2 frequency band, 6.0 dBi for LTE FDD 4 frequency band, 7.1 dBi for LTE FDD 5
frequency band, 6.6 dBi for LTE FDD 12 frequency band, 6.9 dBi for LTE FDD 13 frequency
band, 6.9 dBi for LTE FDD 14 frequency band, 6.6 dBi for LTE FDD 17 frequency band, 9.0
dBi for LTE FDD 25 frequency band, 7.0 dBi for LTE FDD 26 frequency band and 6.0 dBi for
LTE FDD 66 frequency band.
Multi-transmitter, supporting simultaneous transmission configurations, have not been
evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f)
composite system and §2.1 end product terms and concepts.
Compliance of this device in all final product configurations is the responsibility of the Grantee.
Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and
host/module authentication, or new application if appropriate.
This device contains functions that are not operational in U.S. Territories. This filing is only
applicable for U.S. operations. |
1 2 3 4 5 | Output power listed is conducted.
This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions and instructions for satisfying RF exposure compliance. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.
The maximum antenna gain including cable loss for compliance with radiated power limits, RF exposure requirements and the categorical exclusion requirements of 2.1091 is 9.0 dBi for LTE FDD 2 frequency band, 6.0 dBi for LTE FDD 4 frequency band, 7.1 dBi for LTE FDD 5 frequency band, 6.6 dBi for LTE FDD 12 frequency band, 6.9 dBi for LTE FDD 13 frequency band, 6.9 dBi for LTE FDD 14 frequency band, 6.6 dBi for LTE FDD 17 frequency band, 9.0 dBi for LTE FDD 25 frequency band, 7.0 dBi for LTE FDD 26 frequency band and 6.0 dBi for LTE FDD 66 frequency band.
Multi-transmitter, supporting simultaneous transmission configurations, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.
Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
DEKRA Testing and Certification, S.A.U.
|
1 2 3 4 5
|
Name |
R****** L********
|
1 2 3 4 5
|
F**** C******
|
1 2 3 4 5
|
Telephone Number |
34-95********
|
1 2 3 4 5
|
34-95********
|
1 2 3 4 5
|
Fax Number |
34-95********
|
1 2 3 4 5
|
34-95********
|
1 2 3 4 5
|
E-mail |
r******@dekra.com
|
1 2 3 4 5
|
f******@dekra.com
|
|