app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2022-02-14
|
1 2 3
|
2020-09-18
|
1 2 3
|
2020-01-13
|
1 2 3
|
Applicant's complete, legal business name |
SmartSense by Digi
|
1 2 3
|
FCC Registration Number (FRN) |
0028136455
|
1 2 3
|
Physical Address |
186 Lincoln St. Suite 8
|
1 2 3
|
186 Lincoln St.
|
1 2 3
|
Boston, MA
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
c******@bureauveritas.com
|
1 2 3
|
t******@bureauveritas.com
|
1 2 3
|
t******@us.bureauveritas.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
2ATZ3
|
1 2 3
|
Equipment Product Code |
SCMB100
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
S******** H******
|
1 2 3
|
D**** B****
|
1 2 3
|
Title |
Chief Technology Officer
|
1 2 3
|
Telephone Number |
85729********
|
1 2 3
|
86680********
|
1 2 3
|
Fax Number |
57425********
|
1 2 3
|
E-mail |
S******@digi.com
|
1 2 3
|
D******@digi.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SCMB100 BT temp/humidity sensor gateway |
1 2 3 | SCMB100 |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Class II Permissive Change |
1 2 3 | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Class II Permissive Change to address simultaneous transmission conditions for Maximum Permissible Exposure with FCC ID: SZ9TM-ZP05X and FCC ID: XMR201906EG21G. Final host integration of simultaneous transmission conditions shall be evaluated to address multi-transmitter procedures and KDB 996369 D04.
Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
1 2 3 | Class II Permissive Change
Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
1 2 3 | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
Bureau Veritas Consumer Products Services, Inc.
|
1 2 3
|
BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC.
|
1 2 3
|
Name |
S**** S******
|
1 2 3
|
S******** L****
|
1 2 3
|
Telephone Number |
+1 92********
|
1 2 3
|
978 6******** Extension:
|
1 2 3
|
Fax Number |
97848********
|
1 2 3
|
E-mail |
S******@bureauveritas.com
|
1 2 3
|
s******@us.bureauveritas.com
|
|