app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7
|
Effective |
2017-04-12
|
1 2 3 4 5 6 7
|
2015-06-08
|
1 2 3 4 5 6 7
|
2015-01-23
|
1 2 3 4 5 6 7
|
2012-01-31
|
1 2 3 4 5 6 7
|
2011-02-10
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0003778479
|
1 2 3 4 5 6 7
|
Physical Address |
8000 West Sunrise Blvd
|
1 2 3 4 5 6 7
|
Ft Lauderdale, Florida 33322
|
1 2 3 4 5 6 7
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
j******@tuvam.com
|
1 2 3 4 5 6 7
|
T******@TIMCOENGR.COM
|
1 2 3 4 5 6 7
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
1 2 3 4 5 6 7
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7
|
Grantee Code |
AZ4
|
1 2 3 4 5 6 7
|
Equipment Product Code |
89FT4892
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7
|
Name |
D**** Z******
|
1 2 3 4 5 6 7
|
Title |
Regulatory Compliance Manager
|
1 2 3 4 5 6 7
|
Telephone Number |
95472********
|
1 2 3 4 5 6 7
|
Fax Number |
--********
|
1 2 3 4 5 6 7
|
E-mail |
d******@motorolasolutions.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 | No |
1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
1 2 3 4 5 6 7 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2-Way Portable Radio |
1 2 3 4 5 6 7 | Portable2-Way Radio with BT |
1 2 3 4 5 6 7 | Portable 2-Way Radio with BT |
1 2 3 4 5 6 7 | PORTABLE2-WAY RADIO WITH BT |
1 2 3 4 5 6 7 | BLUETOOTH TRANSMITTER |
1 2 3 4 5 6 7 | PORTABLE 2-WAY RADIO WITH BT |
1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 7 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 | Original Equipment |
1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 | Grant Comments | Power listed is conducted. Maximum conducted output power is 5.7W according to
90.205(s). This device must be restricted to work related operations in an
Occupational/Controlled RF exposure Environment, not exceeding a maximum
transmitting duty factor of 50%. All qualified end-users of this device must have the
knowledge to control their exposure conditions and/or duration to comply with the
Occupational/Controlled SAR limit and requirements. A label, as described in this
filing, must be displayed on the device to direct users to specific training information
for meeting Occupational Exposure Requirements. SAR compliance for body-worn
operating configurations is limited to the specific belt-clip, holster, and accessories
tested for this filing and to belt-clips, holsters, or similar accessories that have no
metallic component in the assembly and which provide at least 1.5 cm separation
between the device, including its antenna, and the users body. End-users must be
informed of the body-worn operating requirements for satisfying RF exposure
compliance. The highest reported SAR levels are: Head: 6.16 W/kg for 50% Duty
Cycle; Body: 7.79 W/kg for 50% Duty Cycle. Class II Permissive Change: The lower
rated power setting is changed from 1 W to 0.25W using software control.
Class II Change to add new Part 22, 74, and 80 emission designators. |
1 2 3 4 5 6 7 | Power listed is conducted. Maximum conducted output power is 5.7W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Head: 6.16 W/kg for 50% Duty Cycle; Body: 7.79 W/kg for 50% Duty Cycle. Class II Permissive Change: The lower rated power setting is changed from 1 W to 0.25W using software control. (Date of grant 01/31/2012)
Class II Permissive Change: This Class II Permissive Change is to add FCC rule part 22, add Part 90 frequencies of 456-462.5375 MHz and 462.7375-467.5375 MHz, and to replace the power amplifier. The highest reported SAR levels are: Head: 3.15 W/kg for 50% Duty Cycle; Body: 5.64 W/kg for 50% Duty Cycle. |
1 2 3 4 5 6 7 | Power listed is conducted. Maximum conducted output power is 5.7W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Head: 6.16 W/kg for 50% Duty Cycle; Body: 7.79 W/kg for 50% Duty Cycle. Class II Permissive Change: The lower rated power setting is changed from 1 W to 0.25W using software control. (Date of Grant: 01/31/2012)
Class II Permissive Change: This Class II Permissive Change is to add a Vehicular Adapter accessory and six additional antennas to be used with the Vehicular Adapter. The antenna(s) used for this Vehicular Adapter must be installed to provide a separation distance of at least 90 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. |
1 2 3 4 5 6 7 | Power listed is conducted. Maximum conducted output power is 5.7W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Head: 6.16 W/kg for 50% Duty Cycle; Body: 7.79 W/kg for 50% Duty Cycle.
Note 1: 11K0F3E, 8K10F1E, 8K10F1D, 8K10F1W
Class II Permissive Change: The lower rated power setting is changed from 1 W to 0.25W using software control. |
1 2 3 4 5 6 7 | Power listed is Conducted. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance to FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 | Power listed is conducted. Maximum conducted output power is 5.7W according to 90.205(s). This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. SAR compliance for body-worn operating configurations is limited to the specific belt-clip, holster, and accessories tested for this filing and to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device, including its antenna, and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR levels are: Head: 6.16 W/kg for 50% Duty Cycle; Body: 7.79 W/kg for 50% Duty Cycle.
Note 1: 11K0F3E, 8K10F1E, 8K10F1D, 8K10F1W |
1 2 3 4 5 6 7 | Power listed is Conducted. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance to FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7
|
Firm Name |
Motorola Solutions Malaysia Sdn Bhd
|
1 2 3 4 5 6 7
|
Motorola
|
1 2 3 4 5 6 7
|
Name |
S****** H********
|
1 2 3 4 5 6 7
|
W**** E********
|
1 2 3 4 5 6 7
|
Telephone Number |
60485******** Extension:
|
1 2 3 4 5 6 7
|
954-7********
|
1 2 3 4 5 6 7
|
Fax Number |
604-6********
|
1 2 3 4 5 6 7
|
954-7********
|
1 2 3 4 5 6 7
|
E-mail |
c******@motorolasolutions.com
|
1 2 3 4 5 6 7
|
F******@motorolasolutions.com
|
|