app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2018-06-01
|
1 2 3 4 5 6
|
2016-12-14
|
1 2 3 4 5 6
|
2016-08-19
|
1 2 3 4 5 6
|
2015-12-18
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0003778479
|
1 2 3 4 5 6
|
Physical Address |
8000 West Sunrise Blvd
|
1 2 3 4 5 6
|
Ft Lauderdale, Florida 33322
|
1 2 3 4 5 6
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
j******@tuvsud.com
|
1 2 3 4 5 6
|
j******@acstestlab.com
|
1 2 3 4 5 6
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
1 2 3 4 5 6
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
AZ4
|
1 2 3 4 5 6
|
Equipment Product Code |
89FT7065
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
D****** Z******
|
1 2 3 4 5 6
|
Title |
Regulatory Compliance Manager
|
1 2 3 4 5 6
|
Telephone Number |
95472********
|
1 2 3 4 5 6
|
Fax Number |
--********
|
1 2 3 4 5 6
|
E-mail |
d******@motorolasolutions.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
1 2 3 4 5 6 | DTS - Digital Transmission System |
1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2-Way Portable Radio with Bluetooth, Bluetooth LE and WiFi |
1 2 3 4 5 6 | Portable 2-Way Radio with BT and WiFi |
1 2 3 4 5 6 | 2-Way Portable Radio with BT and WiFi |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Yes |
1 2 3 4 5 6 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 | Original Equipment |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | Power listed is rated conducted. Maximum conducted output power per 90.205(s) is
4.8 Watts. Minimum output setting is 1W. This device must be restricted to work
related operations in an Occupational/Controlled RF exposure Environment, not
exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this
device must have the knowledge to control their exposure conditions and/or duration
to comply with the Occupational/Controlled SAR limit and requirements. A label, as
described in this filing, must be displayed on the device to direct users to specific
training information for meeting Occupational Exposure Requirements. Body-worn
operating configuration is limited to the specific belt-clip supplied or similar accessory
for use with this product. End-users must be informed of the body-worn operating
requirements for satisfying RF exposure compliance. The highest reported SAR
values for head, body-worn accessory, and simultaneous transmission exposure
conditions are 3.43 W/kg, 7.41 W/kg, and 7.42 W/kg, respectively.
Class II Change to address replacement of EOL parts. |
1 2 3 4 5 6 | Power listed is rated conducted. Maximum conducted output power per 90.205(s) is 4.8 Watts. Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission exposure conditions are 3.99 W/kg, 7.41 W/kg, and 7.42 W/kg, respectively.
Class II Change to add new 2 new models with new antenna connector as described in this filing. |
1 2 3 4 5 6 | Power listed is rated conducted. Maximum conducted output power per 90.205(s) is 4.8 Watts. Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission exposure conditions are 3.43 W/kg, 7.41 W/kg, and 7.42 W/kg, respectively.
Class II Change to add new emission designators to Part 22 and 74 as described in this filing. |
1 2 3 4 5 6 | Power listed is Conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in this composite filing. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg, and 7.42 W/kg, respectively. |
1 2 3 4 5 6 | Power listed is Conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in this composite filing. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
1 2 3 4 5 6 | Power listed is rated conducted. Maximum conducted output power per 90.205(s) is 4.8 Watts. Minimum output setting is 1W. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied or similar accessory for use with this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission exposure conditions are 3.43 W/kg, 7.41 W/kg, and 7.42 W/kg, respectively. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Motorola Penang Advanced Communication Laboratory
|
1 2 3 4 5 6
|
TUV SUD PSB Pte Ltd
|
1 2 3 4 5 6
|
Motorola Solutions Malaysia Sdn Bhd
|
1 2 3 4 5 6
|
Name |
H******** H****
|
1 2 3 4 5 6
|
J****** D********
|
1 2 3 4 5 6
|
S****** H****
|
1 2 3 4 5 6
|
Telephone Number |
604-2********
|
1 2 3 4 5 6
|
65-68********
|
1 2 3 4 5 6
|
60485******** Extension:
|
1 2 3 4 5 6
|
Fax Number |
604 6********
|
1 2 3 4 5 6
|
+65 6********
|
1 2 3 4 5 6
|
604-6********
|
1 2 3 4 5 6
|
E-mail |
h******@motorolasolutions.com
|
1 2 3 4 5 6
|
j******@tuv-sud-psb.sg
|
1 2 3 4 5 6
|
c******@motorolasolutions.com
|
|