app
s
|
Applicant Information
|
|
various
|
Effective |
2019-08-26
|
various
|
2019-02-12
|
various
|
2019-01-29
|
various
|
Applicant's complete, legal business name |
HP Inc.
|
various
|
FCC Registration Number (FRN) |
0025126541
|
various
|
Physical Address |
3390 East Harmony Road
|
various
|
Fort Collins, CO
|
various
|
Fort Collins, Colorado 80528
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
c******@telefication.com
|
various
|
u******@sgs.com
|
various
|
U******@SGS.COM
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
B94
|
various
|
Equipment Product Code |
9560NGWCP
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
R******** P****** T****
|
various
|
Title |
US Canada Technical Regulations
|
various
|
Telephone Number |
970-8********
|
various
|
Fax Number |
000-0********
|
various
|
E-mail |
r******@hp.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd
|
various
|
SGS Taiwan Ltd.
|
various
|
SGS Tawain Ltd.
|
various
|
Name |
J****** C******
|
various
|
W**** C****
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
No.2 Keji 1st Rd.
|
various
|
No. 2 Keji 1st Rd.
|
various
|
No.2, Keji 1st Rd.
|
various
|
Taoyuan City, 33383
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2********
|
various
|
88622******** Extension:
|
various
|
Fax Number |
886 2********
|
various
|
88622********
|
various
|
E-mail |
j******@sgs.com
|
various
|
w******@sgs.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd
|
various
|
SGS Taiwan Ltd.
|
various
|
SGS Tawain Ltd.
|
various
|
Name |
J****** C******
|
various
|
W****** C******
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
No.2 Keji 1st Rd.
|
various
|
No. 2 Keji 1st Rd.
|
various
|
No.2, Keji 1st Rd.
|
various
|
Taoyuan City, 33383
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2********
|
various
|
88622******** Extension:
|
various
|
88622********
|
various
|
Fax Number |
886 2********
|
various
|
88622********
|
various
|
E-mail |
j******@sgs.com
|
various
|
w******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/02/2020 |
various | 07/31/2019 |
various | 07/28/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 9560 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
various | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Change in identification of presently authorized equipment. Original FCC ID: PD99560NG Grant Date: 07/25/2017 |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : HP/TPN-Q228) with 4 new antennas(Vendor: INPAQ, Part Number: DQ60PLBLB27 (WA-P-LBLB-02-088) (TX1) and DQ60PLBLB27 (WA-P-LBLB-02-088) (TX2); Vendor: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD037 (0ACQD019007N) (TX1) and DQ60ACQD037 (0ACQD019007N) (TX2)) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.1 W/kg and 1.30 W/kg, respectively.
Single Modular Approval : Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Change in identification as specified under 47CFR2.933 of the FCC rules. |
various | Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : HP/TPN-Q228) with 4 new antennas(Vendor: INPAQ, Part Number: DQ60PLBLB27 (WA-P-LBLB-02-088) (TX1) and DQ60PLBLB27 (WA-P-LBLB-02-088) (TX2); Vendor: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD037 (0ACQD019007N) (TX1) and DQ60ACQD037 (0ACQD019007N) (TX2)) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.33 W/kg, respectively.
Single Modular Approval : Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Change in identification as specified under 47CFR2.933 of the FCC rules. |
various | Class II Permissive Change : This change is to incorporate this Module into a notebook computer(Brand/Model number : HP/TPN-Q228) with 4 new antennas(Vendor: INPAQ, Part Number: DQ60PLBLB27 (WA-P-LBLB-02-088) (TX1) and DQ60PLBLB27 (WA-P-LBLB-02-088) (TX2); Vendor: High-Tek Electronics Co., Ltd, Part Number: DQ60ACQD037 (0ACQD019007N) (TX1) and DQ60ACQD037 (0ACQD019007N) (TX2)) as described in this filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.00 W/kg and 1.06 W/kg, respectively.
Single Modular Approval : Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Change in identification as specified under 47CFR2.933 of the FCC rules. |
various | C2PC: Integration in a new portable host (Brand name: HP / model: HP/ HSN-I22C) and to add 4 new antennas as described in this filing:
PIFA Antenna, Supplier: AWAN
PIFA Antenna: Supplier AWAN
Main Antenna, Type: PIFA; Brand Name: AWAN:
Parts Number: 6036B0234001 (ANP6Y-100282) Peak Gain: 2.4GHz, -2.67dBi, 5GHz, -1.47dBi.
Aux Antenna, Type: PIFA; Brand Name: AWAN;
Parts Number: 6036B0234301 (ANP6Y-100281) Peak Gain: 2.4GHz, -4.76dBi, 5GHz: -2.53dBi.
PIFA Antenna: Supplier HONG-BO
Main Antenna, Type: PIFA; Brand Name: HONG-BO
Parts Number: 6036B0234501 (260-27275) Peak Gain: 2.4GHz, 1.57dBi, 5GHz, 1.00dBi.
Aux Antenna, Type: PIFA; Brand Name: HONG-BO
Parts Number: 6036B0233201 (260-27274) (Aux) Peak Gain: 2.4GHz, -2.98dBi, 5GHz: 2.55dBi.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 0.25 W/kg and 1.33 W/kg respectively. |
various | C2PC: Integration in a new portable host (Brand name: HP / model: HP/ HSN-I22C) and to add 4 new antennas as described in this filing:
PIFA Antenna: Supplier AWAN
Main Antenna, Type: PIFA; Brand Name: AWAN:
Parts Number: 6036B0234001 (ANP6Y-100282) Peak Gain: 2.4GHz, -2.67dBi, 5GHz, -1.47dBi.
Aux Antenna, Type: PIFA; Brand Name: AWAN;
Parts Number: 6036B0234301 (ANP6Y-100281) Peak Gain: 2.4GHz, -4.76dBi, 5GHz: -2.53dBi.
PIFA Antenna: Supplier HONG-BO
Main Antenna, Type: PIFA; Brand Name: HONG-BO
Parts Number: 6036B0234501 (260-27275) Peak Gain: 2.4GHz, 1.57dBi, 5GHz, 1.00dBi.
Aux Antenna, Type: PIFA; Brand Name: HONG-BO
Parts Number: 6036B0233201 (260-27274) (Aux)Peak Gain: 2.4GHz, -2.98dBi, 5GHz: 2.55dBi.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
The highest reported Body and Simultaneous SAR values are 1.08 W/kg and 1.35 W/kg respectively. |
various | C2PC: Integration in a new portable host (Brand name: HP / model: HP/ HSN-I22C) and to add 4 new antennas as described in this filing:
PIFA Antenna, Supplier: AWAN
Main Antenna, Type: PIFA; Brand Name: AWAN:
Parts Number: 6036B0234001 (ANP6Y-100282) Peak Gain: 2.4GHz, -2.67dBi, 5GHz, -1.47dBi.
Aux Antenna, Type: PIFA; Brand Name: AWAN;
Parts Number: 6036B0234301 (ANP6Y-100281) Peak Gain: 2.4GHz, -4.76dBi, 5GHz: -2.53dBi.
PIFA Antenna: Supplier HONG-BO
Main Antenna, Type: PIFA; Brand Name: HONG-BO
Parts Number: 6036B0234501 (260-27275) Peak Gain: 2.4GHz, 1.57dBi, 5GHz, 1.00dBi.
Aux Antenna, Type: PIFA; Brand Name: HONG-BO
Parts Number: 6036B0233201 (260-27274) (Aux)Peak Gain: 2.4GHz, -2.98dBi, 5GHz: 2.55dBi.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 1.10 W/kg respectively. |
various | Change in identification as specified under 47CFR2.933 of the FCC rules. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Change in identification as specified under 47CFR2.933 of the FCC rules. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Change in identification as specified under 47CFR2.933 of the FCC rules. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.55W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Change in identification as specified under 47CFR2.933 of the FCC rules. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SGS Taiwan Ltd. Electronics & Communication Lab
|
various
|
SGS Taiwan Ltd.
|
various
|
Name |
W****** C******
|
various
|
R******** W******
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
E-mail |
w******@sgs.com
|
various
|
R******@sgs.com
|
|