app
s
|
Applicant Information
|
|
various
|
Effective |
2023-12-21
|
various
|
2023-12-18
|
various
|
2023-10-17
|
various
|
2023-10-15
|
various
|
2022-06-19
|
various
|
2022-04-20
|
various
|
2022-03-03
|
various
|
2022-01-20
|
various
|
2021-11-09
|
various
|
2021-09-01
|
various
|
2021-08-27
|
various
|
2021-08-22
|
various
|
2021-06-21
|
various
|
2021-05-27
|
various
|
Applicant's complete, legal business name |
HP Inc.
|
various
|
FCC Registration Number (FRN) |
0025126541
|
various
|
0008035131
|
various
|
Physical Address |
3390 East Harmony Road
|
various
|
Fort Collins, CO
|
various
|
Fort Collins, Colorado 80528
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
t******@timcoengr.com
|
various
|
K******@sporton-usa.com
|
various
|
K******@sporton-usa.com
|
various
|
T******@TIMCOENGR.COM
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
B94
|
various
|
Equipment Product Code |
MT7921S
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
R****** P******** T****
|
various
|
Title |
US Canada Technical Regulations
|
various
|
Telephone Number |
970-8********
|
various
|
Fax Number |
000-0********
|
various
|
E-mail |
r******@hp.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Name |
I****** C********
|
various
|
J****** T****
|
various
|
Physical Address |
No.52, Huaya 1st Rd., Guishan Dist.
|
various
|
No.52, HwaYa 1st Rd., Kwei-Shan District
|
various
|
No.52, HwaYa 1st Rd.
|
various
|
No. 52, HwaYa 1st Rd.
|
various
|
Taoyuan, 333
|
various
|
Taoyuan
|
various
|
Taoyuan City
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
886-3********
|
various
|
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
i******@sporton.com.tw
|
various
|
j******@sporton.com.tw
|
various
|
J******@sporton.com.tw
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Sporton International Inc.
|
various
|
Name |
I******** C******
|
various
|
Physical Address |
No.52, Huaya 1st Rd., Guishan Dist.
|
various
|
Taoyuan, 333
|
various
|
Taoyuan
|
various
|
Taiwan
|
various
|
Telephone Number |
886-3********
|
various
|
886-3********
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
i******@sporton.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/18/2024 |
various | 06/15/2024 |
various | 04/15/2024 |
various | 04/13/2024 |
various | 12/17/2022 |
various | 10/17/2022 |
various | 08/30/2022 |
various | 07/18/2022 |
various | 05/08/2022 |
various | 02/28/2022 |
various | 02/27/2022 |
various | 02/23/2022 |
various | 02/16/2022 |
various | 12/18/2021 |
various | 11/23/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2TX 11ax (WiFi6_) + BLE Combo Card |
various | 2TX 11ax (WiFi6) + BLE Combo Card |
various | 2TX 11ax(Wifi6) + BLE Combo Card |
various | 2TX 11ax (WiFi6) +BLE Combo Card |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
various | No |
various | Modular Equipment Type | Single Modular Approval |
various | Limited Single Modular Approval |
various | Limited Split Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Change in Identification |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, TPN-W157. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.48 W/kg and 0.92 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, TPN-W157. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.22 W/kg and 0.92 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, TPN-W157. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.40 W/kg and 0.92 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, TPN-W156. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.42 W/kg and 0.89 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, TPN-W156. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.61 W/kg and 1.13 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, TPN-W156. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.13 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, TPN-Q295. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.47 W/kg and 1.34 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, TPN-Q295. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.44 W/kg and 1.29 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, TPN-Q295. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.12 W/kg and 1.34 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, TPN-Q296. The highest reported SAR values for body and simultaneous transmission use conditions are 0.13 W/kg and 0.71 W/kg respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, TPN-Q296. The highest reported SAR values for body and simultaneous transmission use conditions are 0.24 W/kg and 0.59 W/kg respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, TPN-Q296. The highest reported SAR values for body and simultaneous transmission use conditions are 0.35 W/kg and 0.71 W/kg respectively. |
various | C2PC to enable portable use when integrated into the HP Notebook PC, Model: TPN-Q283. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.59 W/kg, respectively.
Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/k respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | C2PC to enable portable use when integrated into the HP Notebook PC, Model: TPN-Q283. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.51 W/kg and 1.59 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
various | C2PC to enable portable use when integrated into the HP Notebook PC, Model: TPN-Q283. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.66 W/kg and 1.59 W/kg, respectively.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W147. The highest reported SAR values for body and simultaneous transmission use conditions are 0.49 W/kg and 0.67 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W147. The highest reported SAR values for body and simultaneous transmission use conditions are 0.55 W/kg and 0.74 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W147. The highest reported SAR values for body and simultaneous transmission use conditions are 0.19 W/kg and 0.74 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: TPN-C158. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.57 W/kg and 1.30 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: TPN-C158. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.22 W/kg and 1.55 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: TPN-C158. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.83 W/kg and 1.55 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: TPN-W150. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.59 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and
0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: TPN-W150. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.41 W/kg and 0.48 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and
1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: TPN-W150. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.52 W/kg and 0.59 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5 mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77 W/kg and 1.20 W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W149. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.25 W/kg and 1.30 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5 mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50 W/kg and 0.93 W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W149. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.30 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5 mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50 W/kg and 0.93 W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W149. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.07 W/kg and 1.07 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and
1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook
Computer, Model: HSN-I43C-5. The highest reported SAR for use at the body and
simultaneous transmission exposure conditions are 1.07 W/kg and 1.15 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and
0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook
Computer, Model: HSN-I43C-5. The highest reported SAR for use at the body and
simultaneous transmission exposure conditions are < 0.10 W/kg and 1.15 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and
0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook
Computer, Model: HSN-I43C-5. The highest reported SAR for use at the body and
simultaneous transmission exposure conditions are 0.91 W/kg and 0.91 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and
1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: HSN-I43C-4. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.88 W/kg and 1.02 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and
0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook
Computer, Model: HSN-I43C-4. The highest reported SAR for use at the body and
simultaneous transmission exposure conditions are 0.95 W/kg and 0.95 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile
RF exposure condition and also portable RF exposure condition with reduced power. The
antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter, except in accordance with FCC multi-transmitter product
guidelines. Portable configuration with minimum antenna to user distance of 5mm
restriction has been evaluated for notebook configuration. The highest reported SAR for
body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg
respectively. Approval is limited to OEM installation only. OEM integrators must be
provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook
Computer, Model: HSN-I43C-4. The highest reported SAR for use at the body and
simultaneous transmission exposure conditions are 0.14 W/kg and 1.02 W/kg,
respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and
1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: HSN-I43C. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.96 W/kg and 1.06 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: HSN-I43C. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.06 W/kg, respectively. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval
for mobile RF exposure condition and also portable RF exposure condition with reduced
power. The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product guidelines. Portable configuration with minimum antenna to user
distance of 5mm restriction has been evaluated for notebook configuration. The highest
reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and
0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must
be provided with antenna installation instructions. OEM integrators and end-Users must be
provided with transmitter operation conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM integrators are
instructed to ensure that the end user has no manual instructions to remove or install the
device. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20
MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer, Model: HSN-I43C. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.70 W/kg and 0.70 W/kg, respectively. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W146. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.36 W/kg and 1.52 W/kg, respectively, when integrated with the following antennas:
Vendor: Inpaq, Type: PIFA
TX1: Part Number: 025.901SM.0031 (WA-P-LE-02-004)
TX2: Part Number: 025.901SM.0021 (WA-P-LE-02-003)
Vendor: WNC, Type: PIFA
TX1: Part Number: 025.901SM.0011 (81EABD15.G25)
TX2: Part Number: 025.901SM.0001 (81EABD15.G24) |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W146. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.52 W/kg, respectively, when integrated with the following antennas:
Vendor: Inpaq, Type: PIFA
TX1: Part Number: 025.901SM.0031 (WA-P-LE-02-004)
TX2: Part Number: 025.901SM.0021 (WA-P-LE-02-003)
Vendor: WNC, Type: PIFA
TX1: Part Number: 025.901SM.0011 (81EABD15.G25)
TX2: Part Number: 025.901SM.0001 (81EABD15.G24) |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes.
Class II Permissive Change: Enables portable use when integrated into the HP Notebook PC, Model: TPN-W146. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.17 W/kg and 1.17 W/kg, respectively, when integrated with the following antennas:
Vendor: Inpaq, Type: PIFA
TX1: Part Number: 025.901SM.0031 (WA-P-LE-02-004)
TX2: Part Number: 025.901SM.0021 (WA-P-LE-02-003)
Vendor: WNC, Type: PIFA
TX1: Part Number: 025.901SM.0011 (81EABD15.G25)
TX2: Part Number: 025.901SM.0001 (81EABD15.G24) |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.50W/kg and 0.93W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz and 40 MHz bandwidth modes. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.43W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF exposure condition and also portable RF exposure condition with reduced power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Portable configuration with minimum antenna to user distance of 5mm restriction has been evaluated for notebook configuration. The highest reported SAR for body and simultaneous transmission exposure condition is 0.77W/kg and 1.20W/kg respectively. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device supports 2x2 MIMO and has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SGS Taiwan Ltd. Central RF Lab
|
various
|
SPORTON International Inc.
|
various
|
Sporton International Inc.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
R****** W********
|
various
|
A****** C********
|
various
|
R******** C********
|
various
|
E****** L********
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
886-3******** Extension:
|
various
|
+886-******** Extension:
|
various
|
88633********
|
various
|
+886-********
|
various
|
886-3******** Extension:
|
various
|
+886-********
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
886-3********
|
various
|
+886-********
|
various
|
E-mail |
r******@sgs.com
|
various
|
a******@sporton.com.tw
|
various
|
r******@bureauveritas.com
|
various
|
e******@tw.bureauveritas.com
|
|