app
s
|
Applicant Information
|
|
various
|
Effective |
2007-07-03
|
various
|
2007-05-31
|
various
|
2007-04-12
|
various
|
2007-03-15
|
various
|
2006-12-22
|
various
|
2006-12-19
|
various
|
Applicant's complete, legal business name |
HP Inc.
|
various
|
FCC Registration Number (FRN) |
0025126541
|
various
|
Physical Address |
3390 East Harmony Road
|
various
|
Fort Collins, CO
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
j******@ict.cetecom.de
|
various
|
H******@atcb.com
|
various
|
m******@ccsemc.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
B94
|
various
|
Equipment Product Code |
4965AGN
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
R****** P**** T********
|
various
|
Title |
US Canada Technical Regulations
|
various
|
Telephone Number |
970-8********
|
various
|
Fax Number |
000-0********
|
various
|
E-mail |
r******@hp.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Aegis Labs, Inc.
|
various
|
Name |
J******** C******
|
various
|
Physical Address |
23091 Antonio Parkway #B160-417
|
various
|
Rancho Santa Margarita, California 92630
|
various
|
Rancho Santa Margarita, California 92688
|
various
|
United States
|
various
|
Telephone Number |
949 4********
|
various
|
949-4********
|
various
|
Fax Number |
949 4********
|
various
|
949-4********
|
various
|
949-5********
|
various
|
E-mail |
j******@aegislabsinc.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wireless WiFi Link 4965AGN |
various | Class B Computing Device Peripheral |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change to allow portable configuration in specific host as described in this filling.
Power Output listed is Aggregate Conducted. Modular approval.
The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 MHz to 5250 MHz frequency range.
For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID.
For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.537 W/kg; 5.2 GHz-band 0.717 W/kg; 5.8 GHz-band 0.618 W/kg.
End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
various | Class II Permissive Change to allow portable configuration in specific host as described in this filling.
Power Output listed is Aggregate Conducted. Modular approval. The final host device must utilize the BIOS Locking feature as documented in this filing. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID.
For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.537 W/kg; 5.2 GHz-band 0.717 W/kg; 5.8 GHz-band 0.618 W/kg.
End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
various | Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 MHz to 5250 MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
various | Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containinga 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
various | Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
various | Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
various | Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
various | Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
various | Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
various | Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
CETECOM Inc.
|
various
|
AEGIS Labs, Inc.
|
various
|
Compliance Certification Services
|
various
|
Name |
K****** L********
|
various
|
S******** K********
|
various
|
T**** C******
|
various
|
Telephone Number |
408-5********
|
various
|
949-4******** Extension:
|
various
|
510-7********
|
various
|
Fax Number |
408-5********
|
various
|
94982********
|
various
|
510-6********
|
various
|
E-mail |
k******@cetecom.com
|
various
|
s******@aegislabsinc.com
|
various
|
t******@ccsemc.com
|
|