app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2015-02-13
|
1 2 3 4 5 6
|
2014-10-28
|
1 2 3 4 5 6
|
2014-10-02
|
1 2 3 4 5 6
|
2014-06-10
|
1 2 3 4 5 6
|
2013-04-03
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
HP Inc.
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0025126541
|
1 2 3 4 5 6
|
Physical Address |
3390 East Harmony Road
|
1 2 3 4 5 6
|
Fort Collins, Colorado 80528
|
1 2 3 4 5 6
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2 3 4 5 6
|
t******@babt.com
|
1 2 3 4 5 6
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
1 2 3 4 5 6
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
B94
|
1 2 3 4 5 6
|
Equipment Product Code |
HNHWWR
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
R**** P****** T********
|
1 2 3 4 5 6
|
Title |
US Canada Technical Regulations
|
1 2 3 4 5 6
|
Telephone Number |
970-8********
|
1 2 3 4 5 6
|
Fax Number |
000-0********
|
1 2 3 4 5 6
|
E-mail |
r******@hp.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | No |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | No |
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 08/11/2015 |
1 2 3 4 5 6 | 04/25/2015 |
1 2 3 4 5 6 | 03/30/2015 |
1 2 3 4 5 6 | 12/06/2014 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | PCB - PCS Licensed Transmitter |
1 2 3 4 5 6 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WWAN Module Card |
1 2 3 4 5 6 | WWAN Module |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 4 5 6 | Single Modular Approval |
1 2 3 4 5 6 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 | Change in identification of presently authorized equipment. Original FCC ID: QISMU736 Grant Date: 12/03/2012 |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 4 5 6 | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Yes |
1 2 3 4 5 6 | Grant Comments | Limited Single Modular Approval. Output power is conducted. Antenna gain including cable loss must not exceed 3.0 dBi in the 850 MHz Cellular band, 3.0 dBi in the PCS 1900 MHz band and 3.0 dBi in the FDD IV band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Original Grant date: 04/03/2013)
Class II Permissive Change: Limited single modular appproval. This Class II Permissive Change is to integrate this module into hp Notebook PC/ Model: HSTNN-W04C. |
1 2 3 4 5 6 | Limited Single Modular Approval. Output power is conducted. Antenna gain including cable loss must not exceed 3.0 dBi in the 850 MHz Cellular band, 3.0 dBi in the PCS 1900 MHz band and 3.0 dBi in the FDD IV band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Original Grant date: 04/03/2013)
Class II Permissive Change: Limited single modular appproval. This Class II Permissive Change is to integrate this module into hp Notebook PC, Model: TPN-Q154, while being co-located with already approved modules FCC ID QDS-BRCM1063 and FCCID TX2-RTL8723BE. SAR compliance for portable use in this final host configuration has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures, or as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 0.24 W/kg, respectively. |
1 2 3 4 5 6 | Limited Single Modular Approval. Output power is conducted. Antenna gain including cable loss must not exceed 3.0 dBi in the 850 MHz Cellular band, 3.0 dBi in the PCS 1900 MHz band and 3.0 dBi in the FDD IV band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Original Grant date: 04/03/2013)
Class II Permissive Change: Limited single modular appproval. This Class II Permissive Change is to integrate this module into hp Notebook PC, Model: TPN-C115, while being co-located with already approved modules FCC ID QDS-BRCM1063 and FCCID TX2-RTL8723BE. SAR compliance for portable use in this final host configuration has been evaluated as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures, or as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.07 W/kg and 1.07 W/kg, respectively. |
1 2 3 4 5 6 | Limited Single Modular Approval. Output power is conducted. Antenna gain including cable loss must not exceed 3.0 dBi in the 850 MHz Cellular band, 3.0 dBi in the PCS 1900 MHz band and 3.0 dBi in the FDD IV band, for the purpose of satisfying the requirements of 2.1043 and 2.1091. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. (Date of Grant: 04/03/2013)
Class II Permissive Change: This Class II Permissive Change is to integrate the module into the HP Notebook PC, Model: TPN-C115. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.35 W/kg and 1.37 W/kg, respectively. |
1 2 3 4 5 6 | Single Modular Approval.
Output power is conducted. This device is to be used in mobile or fixed applications only.
Antenna gain including cable loss must not exceed 3.0 dBi in the 850 MHz Cellular band, 3.0 dBi in the PCS 1900 MHz band and 3.0 dBi in the FDD IV band, for the purpose of satisfying the
requirements of 2.1043 and 2.1091.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20cm from all persons and must not be co-located or operated in conjunction with any
antenna or transmitter not described under this FCC ID. The final product operating with this
transmitter must include operating instructions and antenna installation instructions, for end-users
and installers to satisfy RF exposure compliance requirements.
Compliance of this device in all final product configurations is the responsibility of the Grantee.
Installation of this device into specific final products may require the submission of a Class II
permissive change application containing data pertinent to RF Exposure, spurious emissions,
ERP/EIRP, and host/module authentication, or new application if appropriate.
This device contains GSM functions that are not operational in the U.S. Territories. This filing is
only applicable for U.S. operations. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5 6
|
Huawei Technologies Co., LTD
|
1 2 3 4 5 6
|
Name |
A****** C********
|
1 2 3 4 5 6
|
Z****** F********
|
1 2 3 4 5 6
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5 6
|
86-75********
|
1 2 3 4 5 6
|
Fax Number |
886-3********
|
1 2 3 4 5 6
|
86-75********
|
1 2 3 4 5 6
|
E-mail |
a******@sporton.com.tw
|
1 2 3 4 5 6
|
z******@huawei.com
|
|