app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2020-07-21
|
1 2 3 4 5
|
Applicant's complete, legal business name |
HP Inc.
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0025126541
|
1 2 3 4 5
|
Physical Address |
3390 East Harmony Road
|
1 2 3 4 5
|
Fort Collins, CO
|
1 2 3 4 5
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
h******@ACBcert.com
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
1 2 3 4 5
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
B94
|
1 2 3 4 5
|
Equipment Product Code |
TNQ248HP2PD
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
R**** P**** T****
|
1 2 3 4 5
|
Title |
US Canada Technical Regulations
|
1 2 3 4 5
|
Telephone Number |
970-8********
|
1 2 3 4 5
|
Fax Number |
000-0********
|
1 2 3 4 5
|
E-mail |
r******@hp.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5
|
Firm Name |
HP Inc.
|
1 2 3 4 5
|
Name |
S****** L****
|
1 2 3 4 5
|
Physical Address |
3390 East Harmony Rd.
|
1 2 3 4 5
|
Fort Collins, Colorado 80528
|
1 2 3 4 5
|
Fort Collins, 80528
|
1 2 3 4 5
|
United States
|
1 2 3 4 5
|
Telephone Number |
28192********
|
1 2 3 4 5
|
E-mail |
s******@hp.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/16/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 | PCB - PCS Licensed Transmitter |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Model TPN-Q248 |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 5 | Modular Equipment Type | Does not apply |
1 2 3 4 5 | Purpose / Application is for | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying with
FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as
described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.62W/kg and 1.52W/kg respectively.
Filing establishes portable category SAR conditions for the System TPN-Q248 - WNC PIFA TX1 DQ6B15GAX00 (81EABB15.GAX). WNC PIFA TX2 DQ6B15GAX00 (81EABB15.GAX)
SAR testing was performed to demonstrate mobile/portable RF compliance. |
1 2 3 4 5 | Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter
product procedures. Grantee must provide installation and operating instructions for complying with
FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must
be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.01W/kg and 1.52W/kg respectively.
Filing establishes portable category SAR conditions for the System TPN-Q248 - WNC PIFA TX1 DQ6B15GAX00 (81EABB15.GAX). WNC PIFA TX2 DQ6B15GAX00 (81EABB15.GAX)
SAR testing was performed to demonstrate mobile/portable RF compliance. |
1 2 3 4 5 | Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any
other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This
module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz,
40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be
provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.52W/kg respectively.
Filing establishes portable category SAR conditions for the System TPN-Q248 - WNC PIFA TX1 DQ6B15GAX00 (81EABB15.GAX). WNC PIFA TX2 DQ6B15GAX00 (81EABB15.GAX)
SAR testing was performed to demonstrate mobile/portable RF compliance. |
1 2 3 4 5 | Output power is ERP for Part 22, Part 27 and Part 90; EIRP for Part 24.and Part 27. This grant is valid only when the
module is integrated as shown in this filing. End-users will not be provided with the module installation instructions.
OEM integrator and end-users must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The maximum antenna gain allowed for use with this device is 5 dBi. This device contains functions that
are not operational in U.S. Territories. This filing is only applicable for U.S. operations. The highest reported Body and
Simultaneous SAR values are 1.40W/kg and 1.52W/kg respectively.
Filing establishes portable category SAR conditions for the System TPN-Q248 - WNC PIFA TX1 DQ6B15GAX00 (81EABB15.GAX). WNC PIFA TX2 DQ6B15GAX00 (81EABB15.GAX)
SAR testing was performed to demonstrate mobile/portable RF compliance. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
Intel Corporation S.A.S.
|
1 2 3 4 5
|
Name |
N**** A********
|
1 2 3 4 5
|
Telephone Number |
00334********
|
1 2 3 4 5
|
Fax Number |
00334********
|
1 2 3 4 5
|
E-mail |
n******@intel.com
|
|