app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2018-10-16
|
1 2 3 4 5 6 7 8 9
|
2017-07-10
|
1 2 3 4 5 6 7 8 9
|
2016-02-12
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
LG Electronics USA
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0023476120
|
1 2 3 4 5 6 7 8 9
|
0020917688
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
1000 Sylvan Avenue
|
1 2 3 4 5 6 7 8 9
|
Englewood Cliffs, New Jersey 07632
|
1 2 3 4 5 6 7 8 9
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
t******@hctamerica.com
|
1 2 3 4 5 6 7 8 9
|
h******@acbcert.com
|
1 2 3 4 5 6 7 8 9
|
H******@acbcert.com
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
BEJ
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
LC10SB
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8 9
|
Name |
K**** H******
|
1 2 3 4 5 6 7 8 9
|
Title |
Director, Standards & Compliance
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
201-4********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
201-8********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
k******@lge.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
DT&C Co., Ltd.
|
1 2 3 4 5 6 7 8 9
|
Audix Technology Corportation
|
1 2 3 4 5 6 7 8 9
|
Name |
H****** S********
|
1 2 3 4 5 6 7 8 9
|
J****** W******
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
42, Yurim-ro, 154beon-gil, Cheoin-gu
|
1 2 3 4 5 6 7 8 9
|
No. 53-11 Dingfu, Linkou Dist.
|
1 2 3 4 5 6 7 8 9
|
Yongin-si, 449-935
|
1 2 3 4 5 6 7 8 9
|
New Taipei City, 24441
|
1 2 3 4 5 6 7 8 9
|
New Taipei City
|
1 2 3 4 5 6 7 8 9
|
South Korea
|
1 2 3 4 5 6 7 8 9
|
Taiwan
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
82-31********
|
1 2 3 4 5 6 7 8 9
|
88626******** Extension:
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
82-31********
|
1 2 3 4 5 6 7 8 9
|
82-31********
|
1 2 3 4 5 6 7 8 9
|
88626********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
h******@dtnc.net
|
1 2 3 4 5 6 7 8 9
|
j******@audixtech.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 9 | No |
1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/14/2019 |
1 2 3 4 5 6 7 8 9 | 01/06/2018 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 9 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 8 9 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 9 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Silverbox RADIO ASM-RECEIVER |
1 2 3 4 5 6 7 8 9 | RADIO ASM-RECEIVER |
1 2 3 4 5 6 7 8 9 | Silver Box Radio Asm-Receiver |
1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 7 8 9 | Original Equipment |
1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 9 | Grant Comments | Class II Permissive Change for hardware changes as described in the filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Class II Permissive Change for hardware changes as described in the filing. Power Output listed is conducted. The antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz bandwidth mode. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. The antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device contains 5GHz and 2.4GHz WLAN transmitters.
Class II Permissive Change: (1) Disable the frequency band 5180 5240 MHz by software (non SRD). (2) Some components of non-radio part are changed. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. The antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz bandwidth mode. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device contains 5GHz WLAN and Bluetooth transmitters.
Class II Permissive Change: (1) Disable the frequency band 5180 5240 MHz by software (non SRD). (2) Some components of non-radio part are changed. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. The antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz bandwidth mode. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device contains 2.4GHz WLAN and Bluetooth transmitters.
Class II Permissive Change: (1) Disable the frequency band 5180 5240 MHz by software (non SRD). (2) Some components of non-radio part are changed. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. The antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz bandwidth mode. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. The antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
HCT Co., Ltd.
|
1 2 3 4 5 6 7 8 9
|
DT&C Co., Ltd.
|
1 2 3 4 5 6 7 8 9
|
Audix Technology Corporation
|
1 2 3 4 5 6 7 8 9
|
Name |
L******** Y****
|
1 2 3 4 5 6 7 8 9
|
W****** L******
|
1 2 3 4 5 6 7 8 9
|
L****** L******
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
82-31********
|
1 2 3 4 5 6 7 8 9
|
82-31********
|
1 2 3 4 5 6 7 8 9
|
822-6********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
82-31********
|
1 2 3 4 5 6 7 8 9
|
82-31********
|
1 2 3 4 5 6 7 8 9
|
886 2********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
y******@hct.co.kr
|
1 2 3 4 5 6 7 8 9
|
l******@dtnc.net
|
1 2 3 4 5 6 7 8 9
|
l******@audixtech.com
|
|