app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2018-07-31
|
1 2 3
|
Applicant's complete, legal business name |
LG Electronics USA
|
1 2 3
|
FCC Registration Number (FRN) |
0023476120
|
1 2 3
|
Physical Address |
1000 Sylvan Avenue
|
1 2 3
|
Englewood Cliffs, New Jersey 07632
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
t******@hctamerica.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
BEJ
|
1 2 3
|
Equipment Product Code |
LGSBWAC92
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
K**** H********
|
1 2 3
|
Title |
Director, Standards & Compliance
|
1 2 3
|
Telephone Number |
201-4********
|
1 2 3
|
Fax Number |
201-8********
|
1 2 3
|
E-mail |
k******@lge.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/26/2019 |
1 2 3 | 01/27/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RF Module |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Modular Approval. Power listed is the maximum Conducted output power. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi- transmitter product procedures. OEM integrators and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 | Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM
integrator. This approval is valid when the antenna(s) used for this device in portable configurations is
installed in mobile hosts with a minimum antenna to user separation distance of at least 20cm. Installation in
portable host configurations requires additional evaluation and certification. Grantee must provide
instructions and coordinate with OEM integrators to determine applicable host configurations to ensure
compliance including RF exposure and simultaneous transmission. This device operates with 20MHz and
40MHz channel bandwidth capabilities and a 2x2 MIMO configuration as described in this filing. |
1 2 3 | Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM
integrator. This approval is valid when the antenna(s) used for this device in portable configurations is
installed in mobile hosts with a minimum antenna to user separation distance of at least 20cm. Installation in
portable host configurations requires additional evaluation and certification. Grantee must provide
instructions and coordinate with OEM integrators to determine applicable host configurations to ensure
compliance including RF exposure and simultaneous transmission. This device operates with 20MHz,
40MHz and 80MHz channel bandwidth capabilities and a 2x2 MIMO configuration as described in this filing. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
HCT Co., Ltd.
|
1 2 3
|
Name |
L****** Y******
|
1 2 3
|
Telephone Number |
82-31********
|
1 2 3
|
Fax Number |
82-31********
|
1 2 3
|
E-mail |
y******@hct.co.kr
|
|