app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2020-07-15
|
1 2 3 4 5
|
2012-11-16
|
1 2 3 4 5
|
Applicant's complete, legal business name |
LG Electronics USA
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0023476120
|
1 2 3 4 5
|
0020917688
|
1 2 3 4 5
|
Physical Address |
111 Sylvan Avenue North Building
|
1 2 3 4 5
|
111 Sylvan Avenue
|
1 2 3 4 5
|
1000 Sylvan Avenue
|
1 2 3 4 5
|
Englewood Cliffs, NJ
|
1 2 3 4 5
|
Englewood Cliffs, New Jersey 07632
|
1 2 3 4 5
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2 3 4 5
|
t******@pctestlab.com
|
1 2 3 4 5
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
1 2 3 4 5
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
BEJ
|
1 2 3 4 5
|
Equipment Product Code |
LTTC10F
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
K****** H********
|
1 2 3 4 5
|
Title |
Director, Standards & Compliance
|
1 2 3 4 5
|
Telephone Number |
201-4********
|
1 2 3 4 5
|
Fax Number |
201-8********
|
1 2 3 4 5
|
E-mail |
k******@lge.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5
|
Firm Name |
PCTEST Engineering Laboratory, Inc.
|
1 2 3 4 5
|
Name |
R****** O****
|
1 2 3 4 5
|
Physical Address |
6660-B Dobbin Road
|
1 2 3 4 5
|
Columbia, Maryland 21045
|
1 2 3 4 5
|
United States
|
1 2 3 4 5
|
Telephone Number |
410-2********
|
1 2 3 4 5
|
Fax Number |
410-2********
|
1 2 3 4 5
|
E-mail |
t******@pctestlab.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/11/2021 |
1 2 3 4 5 | 05/15/2013 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | PCB - PCS Licensed Transmitter |
1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 | DTS - Digital Transmission System |
1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Multi-Band GSM/WCDMA/LTE Telematics Transceiver with WLAN and Bluetooth |
1 2 3 4 5 | Multi-Band CDMA/GSM/WCDMA/LTE Telematics Transceiver with WLAN and Bluetooth |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 | Modular Equipment Type | Does not apply |
1 2 3 4 5 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | Power out is conducted power at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance of 20cm from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Antenna(s) used with this device must not cause radiated power to exceed the limits specified in the FCC rules. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
C2PC: Adding additional antenna. Enable the bandwidth via software, 1.4M/3M/15M/20M Bandwidth for LTE Band 2/4, ?1.4M/3M Bandwidth for LTE Band 5, 5M bandwidth for LTE Band 13. CDMA disabled via SW. |
1 2 3 4 5 | Power out is conducted. This transmitter is authorized to operate with the specific Telematics device described in this filing. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance of 20cm from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Power out is peak conducted. This transmitter is authorized to operate with the specific Telematics device described in this filing. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance of 20cm from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Power out is conducted. This transmitter is authorized to operate with the specific Telematics device described in this filing. |
1 2 3 4 5 | Power out is conducted power at the antenna terminal. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance of 20cm from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Antenna(s) used with this device must not cause radiated power to exceed the limits specified in the FCC rules. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
DT&C Co., Ltd.
|
1 2 3 4 5
|
HCT Co., LTD
|
1 2 3 4 5
|
Name |
L******** S****
|
1 2 3 4 5
|
S****** L******
|
1 2 3 4 5
|
Telephone Number |
82-31********
|
1 2 3 4 5
|
82-31********
|
1 2 3 4 5
|
Fax Number |
82-31********
|
1 2 3 4 5
|
82-31********
|
1 2 3 4 5
|
E-mail |
g******@dtnc.net
|
1 2 3 4 5
|
s******@HCT.co.kr
|
|