app
s
|
Applicant Information
|
|
1 2 3 4
|
Effective |
2018-02-13
|
1 2 3 4
|
2012-08-29
|
1 2 3 4
|
Applicant's complete, legal business name |
LG Electronics USA
|
1 2 3 4
|
FCC Registration Number (FRN) |
0023476120
|
1 2 3 4
|
Physical Address |
1000 Sylvan Avenue
|
1 2 3 4
|
Englewood Cliffs, NJ
|
1 2 3 4
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4
|
TCB Application Email Address |
h******@acbcert.com
|
1 2 3 4
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4
|
Grantee Code |
BEJ
|
1 2 3 4
|
Equipment Product Code |
WN8122E1
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4
|
Name |
K**** H******
|
1 2 3 4
|
Title |
Director, Standards & Compliance
|
1 2 3 4
|
Telephone Number |
201-4********
|
1 2 3 4
|
Fax Number |
201-8********
|
1 2 3 4
|
E-mail |
k******@lge.com
|
|
app
s
|
Technical Contact
|
1 2 3 4
|
Firm Name |
AUDIX Technology Corporation
|
1 2 3 4
|
Audix Technology
|
1 2 3 4
|
Name |
B******** C****
|
1 2 3 4
|
Physical Address |
No. 53-11 Dingfu, Linkou District
|
1 2 3 4
|
New Taipei City, 24443
|
1 2 3 4
|
Taiwan
|
1 2 3 4
|
Telephone Number |
86626******** Extension:
|
1 2 3 4
|
88626******** Extension:
|
1 2 3 4
|
Fax Number |
86626********
|
1 2 3 4
|
88626********
|
1 2 3 4
|
E-mail |
b******@audixtech.com
|
1 2 3 4
|
B******@audixtech.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 | No |
1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 | DTS - Digital Transmission System |
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi module |
1 2 3 4 | WiFi Module |
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 | Original Equipment |
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 | Grant Comments | Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a minimum separation distance from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. This device has a 20 MHz and 40 MHz bandwidth mode. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
C2PC to comply with the new rule for UNII Band 3 (5.8GHz). |
1 2 3 4 | Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a minimum separation distance from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
C2PC to remove UNII Band 3 (5.8GHz) from DTS Grant. It has complied with the new rule and listed on the NII Grant. |
1 2 3 4 | Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a minimum separation distance from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz and 40 MHz bandwidth mode. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 | Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a minimum separation distance from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. This device has a 20 MHz and 40 MHz bandwidth mode. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4
|
Firm Name |
Audix Technology Corporation
|
1 2 3 4
|
Name |
A******** W****
|
1 2 3 4
|
L**** L****
|
1 2 3 4
|
Telephone Number |
88622********
|
1 2 3 4
|
886-2******** Extension:
|
1 2 3 4
|
886-2********
|
1 2 3 4
|
Fax Number |
88622********
|
1 2 3 4
|
886-2********
|
1 2 3 4
|
E-mail |
a******@audixtech.com
|
1 2 3 4
|
l******@audixtech.com
|
|