app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2019-01-20
|
1 2 3 4 5
|
2016-06-23
|
1 2 3 4 5
|
2013-06-18
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Japan Radio Co., Ltd.
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0028126522
|
1 2 3 4 5
|
Physical Address |
226 Airport Parkway
|
1 2 3 4 5
|
San Jose, California 95110
|
1 2 3 4 5
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
e******@ul.com
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
CKE
|
1 2 3 4 5
|
Equipment Product Code |
CMN851A
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
Y******** K******
|
1 2 3 4 5
|
Title |
General Manager
|
1 2 3 4 5
|
Telephone Number |
1-408********
|
1 2 3 4 5
|
E-mail |
k******@jrc.co.jp
|
|
app
s
|
Technical Contact
|
1 2 3 4 5
|
Firm Name |
UL Japan, Inc.
|
1 2 3 4 5
|
Name |
H**** S****
|
1 2 3 4 5
|
T****** A****
|
1 2 3 4 5
|
G****** I********
|
1 2 3 4 5
|
Physical Address |
1-22-3 Megumigaoka, Hiratsuka-shi
|
1 2 3 4 5
|
Kanagawa-ken, 259-1220
|
1 2 3 4 5
|
Japan
|
1 2 3 4 5
|
Telephone Number |
81-46********
|
1 2 3 4 5
|
Fax Number |
81-46********
|
1 2 3 4 5
|
E-mail |
H******@ul.com
|
1 2 3 4 5
|
T******@ul.com
|
1 2 3 4 5
|
G******@ul.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | No |
1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/20/2019 |
1 2 3 4 5 | 12/15/2013 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 | DTS - Digital Transmission System |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless LAN Module |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
1 2 3 4 5 | Class II Permissive Change to add specific antennas described in the filing. Limited Modular Approval. Output power listed is Conducted(Peak). The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. |
1 2 3 4 5 | Class II Permissive Change based on FCC14-30. Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
1 2 3 4 5 | Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. |
1 2 3 4 5 | Limited Modular Approval. Output power listed is Conducted. The antenna shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Use in portable RF exposure conditions will require additional filing for SAR compliance. Host systems must provide regulated supply voltages to the module. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device has a 20 MHz and 40 MHz bandwidth mode. Operations in 5.15-5.25 GHz band are for indoor use only. This device complies with the Dynamic Frequency Selection (DFS) requirements as a Client only without Radar Detection. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
UL Japan, Inc. Shonan EMC EMC Lab.
|
1 2 3 4 5
|
Name |
T**** H****
|
1 2 3 4 5
|
Telephone Number |
+81-5********
|
1 2 3 4 5
|
Fax Number |
+81 5********
|
1 2 3 4 5
|
E-mail |
T******@jp.ul.com
|
|