app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2015-12-03
|
1 2 3
|
2014-02-14
|
1 2 3
|
Applicant's complete, legal business name |
DISH Technologies L.L.C.
|
1 2 3
|
FCC Registration Number (FRN) |
0008694093
|
1 2 3
|
Physical Address |
90 Inverness Circle East
|
1 2 3
|
Englewood, Colorado 80112
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
L******@ul.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
DKN
|
1 2 3
|
Equipment Product Code |
CR90
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
I******** S****
|
1 2 3
|
Title |
Senior Engineer
|
1 2 3
|
Telephone Number |
303-7********
|
1 2 3
|
Fax Number |
303-7********
|
1 2 3
|
E-mail |
i******@dish.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/31/2016 |
1 2 3 | 06/19/2014 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ac Client STB |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Does not apply |
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Class II permissive change to show compliance with New U-NII-3 sub band rule per FCC ET docket No. 13-49. Power Output listed is the maximum combined conducted output power. 802.11a/n/ac operations support 3x3 Spatial Multiplexing MIMO and bandwidths of 20MHz, 40MHz, and 80MHz as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. This device is authorized for indoor use only within the 5150~5250 MHz band. |
1 2 3 | Power Output listed is the maximum combined conducted output power. 802.11a/n/ac operations support 3x3 Spatial Multiplexing MIMO and bandwidths of 20MHz, 40MHz, and 80MHz as described within this filing. The antennas used for this transmitter shall be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. The final product operating with this transmitter must include operating instructions and applicable warnings for end-users and installers to satisfy RF exposure compliance requirements. This device is authorized for indoor use only within the 5150~5250 MHz band. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
UL Verification Services Inc. (formerly UL CCS)
|
1 2 3
|
Compliance Certification Services
|
1 2 3
|
Name |
M******** M********
|
1 2 3
|
T**** C****
|
1 2 3
|
Telephone Number |
919 5********
|
1 2 3
|
510-7********
|
1 2 3
|
Fax Number |
000-0********
|
1 2 3
|
510-6********
|
1 2 3
|
E-mail |
m******@ul.com
|
1 2 3
|
t******@ccsemc.com
|
|