app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7
|
Effective |
2015-11-03
|
1 2 3 4 5 6 7
|
2015-09-25
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Chicony Electronics Co Ltd
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0005810643
|
1 2 3 4 5 6 7
|
Physical Address |
No.69, Sec. 2, Guangfu Rd., Sanchong Dist.
|
1 2 3 4 5 6 7
|
No.69, Sec. 2, Guangfu Rd.
|
1 2 3 4 5 6 7
|
New Taipei City, N/A
|
1 2 3 4 5 6 7
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
K******@phoenix-testlab.de
|
1 2 3 4 5 6 7
|
b******@phoenix-testlab.de
|
1 2 3 4 5 6 7
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7
|
Grantee Code |
E8H
|
1 2 3 4 5 6 7
|
Equipment Product Code |
AR5B22
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7
|
Name |
T****** C********
|
1 2 3 4 5 6 7
|
Title |
Manager
|
1 2 3 4 5 6 7
|
Telephone Number |
886-2******** Extension:
|
1 2 3 4 5 6 7
|
Fax Number |
886-2********
|
1 2 3 4 5 6 7
|
E-mail |
t******@chicony.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 | No |
1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 card |
1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 7 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 7 | Change in Identification |
1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 | Grant Comments | Class II permissive change filing to add new antennas and power reduction.
Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm.
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. This device has 20 and 40 MHz BW modes. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg. |
1 2 3 4 5 6 7 | Class II permissive change to add new antennas and power reduction.
Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm.
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.
This device has 20 and 40 MHz BW modes.
The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg. |
1 2 3 4 5 6 7 | Class II permissive change to add new antennas and power reduction.
Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm.
Output power is conducted. |
1 2 3 4 5 6 7 | Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm.
Output power is conducted. |
1 2 3 4 5 6 7 | Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm.
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.
The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg. |
1 2 3 4 5 6 7 | Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm.
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.
The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg. |
1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5 6 7
|
Name |
A******** C****
|
1 2 3 4 5 6 7
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5 6 7
|
Fax Number |
886-3********
|
1 2 3 4 5 6 7
|
E-mail |
a******@sporton.com.tw
|
|