802.11bg, BT, WWAN Combo Module RC10

Intermec Technologies Corporation

Application Exhibits

frequency equipment class purpose
1 2009-01-31 1852.4 ~ 1907.5 PCB - PCS Licensed Transmitter Change in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/2009
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2412 ~ 2462 DTS - Digital Transmission System
app s submitted / available
1 2 3 Cover Letter(s) pdf
1 2 3 Cover Letter(s) pdf
1 2 3 External Photos pdf
1 2 3 ID Label/Location Info pdf
1 2 3 ID Label/Location Info pdf

Application Forms

app s Applicant Information
1 2 3 Effective 2009-01-31
1 2 3 Applicant's complete, legal business name Intermec Technologies Corporation
1 2 3 FCC Registration Number (FRN) 0022970339
1 2 3 Physical Address 9680 Old Bailes Rd.
1 2 3 Fort Mill, South Carolina 29707
1 2 3 United States
app s TCB Information
1 2 3 TCB Application Email Address m******@ccsemc.com
1 2 3 TCB Scope B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 Grantee Code EHA
1 2 3 Equipment Product Code RC10
app s Person at the applicant's address to receive grant or for contact
1 2 3 Name B******** R****
1 2 3 Title VP & GC, Honeywell Scanning & Mobility
1 2 3 Telephone Number 803-8********
1 2 3 Fax Number 803-8********
1 2 3 E-mail b******@honeywell.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 Is this application for software defined/cognitive radio authorization?No
1 2 3 Equipment ClassPCB - PCS Licensed Transmitter
1 2 3 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 DTS - Digital Transmission System
1 2 3 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11bg, BT, WWAN Combo Module
1 2 3 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 Modular Equipment TypeSingle Modular Approval
1 2 3 Purpose / Application is forChange in identification of presently authorized equipment. Original FCC ID: J9CFENWAY-1 Grant Date: 01/08/2009
1 2 3 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 Grant CommentsOutput power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.0715 W, Part 24 EIRP 0.8318 W, Part 27 0.6026 W. This device contains modes not operational in U.S. Territories. Modular Approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures.. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into portable RF Exposure category devices requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 Modular Approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 Modular Approval. Power listed is the maximum peak conducted output power. Approval is limited to OEM installation only. RF Exposure compliance of this device in all final host configurations is the responsibility of the Grantee. For Mobile RF exposure category, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Portable RF Exposure category use requires SAR evaluation and additional certification for host-specific installations. Antennas must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
1 2 3 Is there an equipment authorization waiver associated with this application?No
1 2 3 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 Firm Name Compliance Certification Services
1 2 3 Name T******** C****
1 2 3 Telephone Number 510-7********
1 2 3 Fax Number 510-6********
1 2 3 E-mail t******@ccsemc.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 22H 824.2 848.8 1.866 2.5 ppm 244KGXW
1 2 22H 824.2 848.8 1.096 2.5 ppm 248KG7W
1 3 22H 826.4 846.6 0.309 2.5 ppm 4M19F9W
1 4 24E 1850.2 1909.8 0.899 2.5 ppm 246KGXW
1 5 24E 1850.2 1909.8 0.841 2.5 ppm 246KG7W
1 6 24E 1852.4 1907.5 0.316 2.5 ppm 4M20F9W
1 7 27 1712.4 1754 0.282 2.5 ppm 4M24F9W
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C 2402.00000000 2480.00000000 0.0016400
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C 2412.00000000 2462.00000000 0.1945400

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC