app
s
|
Applicant Information
|
|
various
|
Effective |
2019-05-02
|
various
|
2019-04-26
|
various
|
2019-02-13
|
various
|
2018-10-11
|
various
|
2018-04-25
|
various
|
2018-04-18
|
various
|
2018-03-23
|
various
|
2018-03-13
|
various
|
2017-11-29
|
various
|
2017-09-15
|
various
|
2017-05-01
|
various
|
2017-04-26
|
various
|
2017-04-20
|
various
|
2016-06-13
|
various
|
2016-06-09
|
various
|
2016-03-14
|
various
|
2015-08-12
|
various
|
2015-06-12
|
various
|
2014-11-03
|
various
|
2014-10-14
|
various
|
2014-10-09
|
various
|
2014-10-02
|
various
|
Applicant's complete, legal business name |
Acer Incorporated
|
various
|
FCC Registration Number (FRN) |
0013355508
|
various
|
Physical Address |
8F, 88, Sec 1, Hsin Tai Wu Rd
|
various
|
Hsichih, Taipei Hsien, 221
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
c******@telefication.com
|
various
|
t******@siemic.com
|
various
|
u******@sgs.com
|
various
|
h******@acbcert.com
|
various
|
H******@acbcert.com
|
various
|
H******@acbcert.coms
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
HLZ
|
various
|
Equipment Product Code |
7265NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
H******** S******** L******
|
various
|
Title |
Manager
|
various
|
Telephone Number |
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
E-mail |
H******@acer.com.tw
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd
|
various
|
SGS Taiwan Ltd.
|
various
|
SGS Tawian Ltd
|
various
|
SGS
|
various
|
SGS-CSTC
|
various
|
Name |
J******** C******
|
various
|
W****** C******
|
various
|
W****** C********
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
134, Wu KungRoad, WuKu Industrial Zone
|
various
|
134,Wu Kung Road,WuKu Industrial Zone
|
various
|
No. 134, Wu Kung Rd., New Taipei Industrial Park
|
various
|
No. 134, Wu Kung Road
|
various
|
134, Wu Kung Road, New Taipei Industrial Park
|
various
|
134 Wu Kung Rd. New Taipei Industrial Pk.
|
various
|
134 Wu Kung Rd.
|
various
|
134, Wu Kung Rd., Wuku Industrail Zone
|
various
|
New Taipei City, 24803
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2********
|
various
|
886-2********
|
various
|
88622******** Extension:
|
various
|
+886 ******** Extension:
|
various
|
+886 ********
|
various
|
886 2********
|
various
|
88********
|
various
|
886 2******** Extension:
|
various
|
88622******** Extension:
|
various
|
88622********
|
various
|
Fax Number |
886 2********
|
various
|
886-2********
|
various
|
88622********
|
various
|
886 2********
|
various
|
88********
|
various
|
886 2********
|
various
|
88622********
|
various
|
E-mail |
J******@sgs.com
|
various
|
j******@sgs.com
|
various
|
w******@sgs.com
|
various
|
w******@sgs.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd
|
various
|
SGS Taiwan Ltd.
|
various
|
Acer Incorporated
|
various
|
Name |
J****** C****
|
various
|
W**** C****
|
various
|
H**** L******
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
134, Wu KungRoad, WuKu Industrial Zone
|
various
|
134,Wu Kung Road,WuKu Industrial Zone
|
various
|
No. 134, Wu Kung Rd., New Taipei Industrial Park
|
various
|
No. 134, Wu Kung Road
|
various
|
8F,88, Sec. 1, Hsin Tai Wu Rd. Hsichih Taipei Hsie
|
various
|
New Taipei City, 24803
|
various
|
Hsien, Taipei Hsien, 221
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2********
|
various
|
886-2********
|
various
|
88622******** Extension:
|
various
|
+886 ******** Extension:
|
various
|
+886 ********
|
various
|
886 2********
|
various
|
+886-********
|
various
|
Fax Number |
886 2********
|
various
|
886-2********
|
various
|
88622********
|
various
|
886 2********
|
various
|
886********
|
various
|
E-mail |
J******@sgs.com
|
various
|
j******@sgs.com
|
various
|
w******@sgs.com
|
various
|
H******@acer.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/24/2019 |
various | 10/21/2019 |
various | 08/12/2019 |
various | 03/30/2019 |
various | 10/23/2018 |
various | 10/16/2018 |
various | 09/20/2018 |
various | 09/10/2018 |
various | 05/28/2018 |
various | 03/14/2018 |
various | 10/27/2017 |
various | 10/28/2017 |
various | 10/23/2017 |
various | 10/17/2017 |
various | 09/10/2016 |
various | 02/07/2016 |
various | 12/09/2015 |
various | 04/28/2015 |
various | 04/12/2015 |
various | 04/08/2015 |
various | 03/31/2015 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 7265NGW |
various | HLZ7265NG |
various | 7265NG |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Change in identification of presently authorized equipment. Original FCC ID: PD97265NG Grant Date: 03/21/2014 |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q10). The highest reported SAR for body, and simultaneous transmission use conditions are: <0.1W/kg, and 0.55 W/kg, respectively.
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. |
various | Class II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q10). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.29 W/kg, and 0.56 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
various | Class II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q10). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.56 W/kg, and 1.06 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
various | Class II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q11). The highest reported SAR for body, and simultaneous transmission use conditions are: <0.1W/kg, and 0.43W/kg, respectively
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
various | Class II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q11). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.47 W/kg, and 0.89 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
various | Class II Permissive Change: To incorporates approved Module into the dedicated host of the laptop platform as described in this filing (acer/Model: N18Q11). The highest reported SAR for body, and simultaneous transmission use conditions are: 0.26 W/kg, and 0.49 W/kg, respectively
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
various | Class II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18P3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.50 W/kg, and 0.87 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | Class II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18P3). The highest reported SAR for body, and simultaneous transmission use conidtion are: <0.10 W/kg, and 0.38W/kg, respectively.
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. |
various | Class II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18P3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.37 W/kg, and 0.64 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. |
various | Class II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18Q3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.53W/kg, and 0.98W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | Class II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18Q3). The highest reported SAR for body, and simultaneous transmission use conidtion are: 0.22W/kg, and 0.38W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. |
various | Class II Permissive Change: To incorporates this Module into the dedicated host of the laptop plateform as described in this filing (acer/Model: N18Q3). The highest reported SAR for body, and simultaneous transmission use conidtion are: <0.10W/kg, and 0.46W/kg, respectively
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. |
various | CIIPC to add Acer Notebook Computer model N17Q9. The highest reported SAR for body and simultaneous transmission mode are 0.51W/kg, and 0.89W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. |
various | CIIPC to add Acer Notebook Computer model N17Q9. The highest reported SAR for body and simultaneous transmission mode are 0.80W/kg, and 1.54W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | CIIPC to add Acer Notebook Computer model N17Q9. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.83W/kg.
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. |
various | CIIPC to add Acer Notebook Computer model N17P6. The highest reported SAR for body and simultaneous transmission mode are 0.50W/kg, and 0.88W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | CIIPC to add Acer Notebook Computer model N17P6. The highest reported SAR for body and simultaneous transmission mode are 0.39W/kg, and 0.71W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. |
various | CIIPC to add Acer Notebook Computer model N17P6. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.38W/kg.
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. |
various | CIIPC to add Acer Notebook Computer model N17W7. The highest reported SAR for body and simultaneous transmission mode are 0.77W/kg, and 1.46W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | CIIPC to add Acer Notebook Computer model N17W7. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.70W/kg.
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg |
various | CIIPC to add Acer Notebook Computer model N17W7. The highest reported SAR for body and simultaneous transmission mode are 0.27W/kg, and 0.46W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. |
various | CIIPC to add Acer Notebook Computer model N17Q8. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.89W/kg.
Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬located with any other transmitters except in accordance with FCC multi¬transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. |
various | CIIPC to add Acer Notebook Computer model N17Q8. The highest reported SAR for body and simultaneous transmission mode are 0.35W/kg, and 0.59W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. |
various | CIIPC to add Acer Notebook Computer model N17Q8. The highest reported SAR for body and simultaneous transmission mode are 0.87W/kg, and 1.46W/kg.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co¬-located with any other transmitters except in accordance with FCC multi¬-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End ¬users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.34 W/kg. Simultaneous TX: 0.62W/kg.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N17W3. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is 0.55W/kg. Simultaneous TX: 1.01W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N17W3. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.02 W/kg. Simultaneous TX: 0.56W/kg.
This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17W3. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.02 W/kg. Simultaneous TX: 0.27W/kg.
This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17Q5. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is: 0.24 W/kg. Simultaneous TX: 0.47W/kg.
This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17Q5. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is 0.54W/kg. Simultaneous TX: 0.73W/kg respectively. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
This change is for module being used in different host (Portable category configuration), Host Acer/Model: N17Q5. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR value is 1.10W/kg. Simultaneous TX: 1.12W/kg . This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
This change is for module being used in different host (Portable category configuration), Host Acer/Model: N16Q15. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-¬located with any other transmitters, except in accordance with FCC multi-¬transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is: 0.38 W/kg. Simultaneous TX: 0.66W/kg.
This change is for module being used in different host (Portable category configuration), Host Acer/Model: N16Q15. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-Located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported body SAR value is: 0.38 W/kg. Simultaneous TX: 0.74W/kg.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N16Q14. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR value is 0.76W/kg. Simultaneous TX: 1.36W/kg. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N16Q14. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported body SAR value is: 0.02 W/kg. Simultaneous TX: 0.63W/kg.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N16Q14. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This device must utilize the bios locking features as documented in this filing. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured Body and Simultaneous SAR values are 0.79W/kg. Simultaneous TX: 1.55W/kg respectively.
This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.65W/kg.
This change is for module being used in different host (Portable category
configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance
This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10 dBi with no changes to hardware or output power. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.96W/kg.
This change is for module being used in different host (Portable category
configuration), Host Acer, Model: N16P1. SAR Testing has been performed to
demonstrate RF Compliance.
This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10 dBi with no changes to hardware or output power. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission
of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described
in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.40 W/kg.
This change is for module being used in different host (Portable category configuration), Host Acer, Model: N16P1. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported body SAR is 0.17 W/kg.
This change is for module being used in different host (Portable category configuration), Host Acer, Model: N16P1. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission
of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz and 5.47-5.725 GHz bands. Device is a 2 x 2 MIMO
configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.96W/kg.
This change is for module being used in different host (Portable category configuration), Host Acer, Model: N16P1. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz and 5.47-5.725 GHz bands. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.65W/kg.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values is 0.46 W/kg.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported body SAR is 0.65 W/kg.
This change is for module being used in different host (Portable category configuration, Host Acer/Model: N15Q8. SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The subject approved module is being used in different host Portable category Configuration, SW5-173/Model:N15C3. SAR Testing is performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth
operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 1.55 W/kg.
The subject approved module is being used in different host Portable category Configuration, SW5-173/Model:N15C3. SAR Testing is performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be used except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 1.04 W/kg.
The subject approved module is being used in different host Portable category Configuration, SW5-173/Model:N15C3. SAR Testing is performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. Highest reported body and simultaneous SAR is 0.22 W/kg and 1.56W/kg respectively.
This change is for module being used in different host (Portable category Configuration, Host Acer/Model: MS2398). SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 1.14 W/kg and 1.56W/kg respectively.
This change is for module being used in different host (Portable category Configuration, Host Acer/Model: MS2398). SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 1.54 W/kg and 1.56W/kg respectively.
This change is for module being used in different host (Portable category Configuration, Host Acer/Model: MS2398). SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 0.85 W/kg and 1.37W/kg respectively.
This change is for module being used in different host (Portable category Configuration, Host Acer/Model: SW5-171, SW5-171P). SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported body and simultaneous SAR is 0.17 W/kg and 1.37W/kg respectively.
This change is for module being used in different host (Portable category Configuration, Host Acer/Model: SW5-171, SW5-171P). SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to
determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body and simultaneous SAR values is: 1.46 W/kg and 1.37W/kg respectively.
This change is for module being used in different host (Portable category Configuration, Host Acer/Model: SW5-171, SW5-171P). SAR Testing has been performed to demonstrate RF Compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be colocated with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Endusers and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg.
This change is to request approval for portable category host PC, model number: ZS8 (acer Aspire R 13, R7-371T and R7-372T), with the specific antennas used as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be colocated with any other transmitters, except in accordance with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg.
This change is to request approval for portable category host PC, model number: ZS8 (acer Aspire R 13, R7-371T and R7-372T), with the specific antennas used as documented in this filing. The highest reported SAR for stand-alone transmission is 1.08 W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be colocated with any other transmitters, except in accordance with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.155.25GHz and 5.475.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.79W/kg. Simultaneous TX: 1.55W/kg.
This change is to request approval for portable category host PC, model number: ZS8 (acer Aspire R 13, R7-371T and R7-372T), with the specific antennas used as documented in this filing. The highest reported SAR for stand-alone transmission is 1.49 W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.55 W/kg. Simultaneous TX: 1.55W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co­located with any other transmitters, except in accordance with FCC multi­transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15­5.25GHz and 5.47­5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR value is: 0.79W/kg. Simultaneous TX: 1.55W/kg. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co­located with any other transmitters except in accordance with FCC multi­transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End­users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Simultaneous SAR is 1.55 W/kg. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SGS Taiwan Ltd. Electronics & Communication Lab
|
various
|
SGS Taiwan Ltd.
|
various
|
SGS TAIWAN LTD.
|
various
|
Name |
W******** C****
|
various
|
R****** W******
|
various
|
R**** W******
|
various
|
N******** B********
|
various
|
J**** L********
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
886-2******** Extension:
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
886-2********
|
various
|
886 2********
|
various
|
E-mail |
w******@sgs.com
|
various
|
r******@sgs.com
|
various
|
R******@sgs.com
|
various
|
n******@sgs.com
|
various
|
j******@sgs.com
|
|