app
s
|
Applicant Information
|
|
various
|
Effective |
2018-10-24
|
various
|
2018-09-28
|
various
|
2018-05-15
|
various
|
2018-04-27
|
various
|
Applicant's complete, legal business name |
Acer Incorporated
|
various
|
FCC Registration Number (FRN) |
0013355508
|
various
|
Physical Address |
8F, 88, Sec 1, Hsin Tai Wu Rd
|
various
|
Hsichih, Taipei Hsien, 221
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
c******@telefication.com
|
various
|
s******@nemko.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
HLZ
|
various
|
Equipment Product Code |
9560D2W
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
H**** S****** L******
|
various
|
Title |
Manager
|
various
|
Telephone Number |
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
E-mail |
H******@acer.com.tw
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd
|
various
|
Name |
J******** C******
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2********
|
various
|
Fax Number |
886 2********
|
various
|
E-mail |
J******@sgs.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd
|
various
|
Name |
J**** C****
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
Taiwan
|
various
|
Telephone Number |
886 2********
|
various
|
Fax Number |
886 2********
|
various
|
E-mail |
J******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 04/16/2019 |
various | 03/26/2019 |
various | 11/10/2018 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 9560 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Change in identification of presently authorized equipment. Original FCC ID: PD99560D2 Grant Date: 12/14/2017 |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N18P2, as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.16 W/kg and 1.28 W/kg, respectively.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.46W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
various | Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N18P2, as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.67 W/kg and 1.24 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.30W/kg and 1.46W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N18P2, as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.12 W/kg and 1.28 W/kg, respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.46W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217
supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as
described in this filing. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this
filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host
integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body
and Simultaneous SAR values are 0.73W/kg and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N17H2, as documented in this filing.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.11 W/kg and 1.59 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for
this transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg
and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N17H2, as documented in this filing.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.10 W/kg and 0.58 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217
Supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter
they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.30W/kg and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N17H2, as documented in this filing.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.26 W/kg and 0.46 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217
Supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter
they choose to integrate into a host product. The highest reported Body and
Simultaneous SAR values are 0.30W/kg and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N18H1, as documented in this filing.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.77 W/kg and 1.35 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217
supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as
described in this filing. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this
filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host
integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body
and Simultaneous SAR values are 0.73W/kg and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N18H1, as documented in this filing.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.20 W/kg and 1.28 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for
this transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. End-users and installers
must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg
and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive change: address RF Exposure in the host of Acer Notebook Computer, model name: N18H1, as documented in this filing.
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.10 W/kg and 1.28 W/kg, respectively. |
various | Class II Permissive change. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to
determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217
supplement documentation. When all conditions of this filing cannot be met installation
of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new
application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as
described in this filing. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this
filing. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. OEM/Host
integrator is responsible for complying with the instructions and requirements for each
transmitter they choose to integrate into a host product. The highest reported Body
and Simultaneous SAR values are 0.73W/kg and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.30W/kg and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.46W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SGS Taiwan Ltd. Electronics & Communication Lab
|
various
|
Sporton International (Shenzen) Inc.
|
various
|
Sporton International (Shenzhen) Inc.
|
various
|
Intel Corporation S.A.S.
|
various
|
Name |
R****** W********
|
various
|
M****** L******
|
various
|
N**** A******
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
86-51********
|
various
|
00334********
|
various
|
Fax Number |
+886-********
|
various
|
86-51********
|
various
|
00334********
|
various
|
E-mail |
r******@sgs.com
|
various
|
m******@sporton.com.tw
|
various
|
n******@intel.com
|
|