app
s
|
Applicant Information
|
|
1 2
|
Effective |
2018-02-06
|
1 2
|
2012-09-11
|
1 2
|
Applicant's complete, legal business name |
JVC KENWOOD Corporation
|
1 2
|
FCC Registration Number (FRN) |
0008154510
|
1 2
|
Physical Address |
Communications Systems Division
|
1 2
|
Yokohama-shi, Kanagawa-ken, N/A
|
1 2
|
Japan
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
k******@hctamerica.com;charvey@ieee.org
|
1 2
|
k******@compliancetesting.com
|
1 2
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
K44
|
1 2
|
Equipment Product Code |
431100
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
T******** S******
|
1 2
|
Title |
Manager
|
1 2
|
Telephone Number |
045-9********
|
1 2
|
Fax Number |
045-9********
|
1 2
|
E-mail |
s******@jvckenwood.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | VHF DIGITAL TRANSCEIVER |
1 2 | VHF Digital Transceiver |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Does not apply |
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | Class II Permissive Change. Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4). |
1 2 | Power output listed is conducted at the antenna connector. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna used for this transmitter must be installed to provide a minimum of 40cm separation to persons and must not transmit simultaneously with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. All qualified end-users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not be greater than 0dBd. This devices complies with the narrowbanding requirements of Section 90.203(j)(4). |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
Intertek Japan K.K.(Kashima Laboratory)
|
1 2
|
Name |
J****** O****
|
1 2
|
Telephone Number |
81-29********
|
1 2
|
Fax Number |
81-29********
|
1 2
|
E-mail |
j******@intertek.com
|
|