app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2020-05-29
|
1 2 3 4 5 6
|
2018-02-09
|
1 2 3 4 5 6
|
2017-10-02
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
D-Link Corporation
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0007371172
|
1 2 3 4 5 6
|
Physical Address |
17595 Mt. Herrmann
|
1 2 3 4 5 6
|
Fountain Valley, CA
|
1 2 3 4 5 6
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
t******@cetecom.com
|
1 2 3 4 5 6
|
c******@telefication.com
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
KA2
|
1 2 3 4 5 6
|
Equipment Product Code |
AP1530A1
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
B**** A********
|
1 2 3 4 5 6
|
Title |
General Counsel
|
1 2 3 4 5 6
|
Telephone Number |
714-8********
|
1 2 3 4 5 6
|
Fax Number |
866-7********
|
1 2 3 4 5 6
|
E-mail |
b******@dlink.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6
|
Firm Name |
BTL Inc.
|
1 2 3 4 5 6
|
Name |
S**** L********
|
1 2 3 4 5 6
|
Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
1 2 3 4 5 6
|
China
|
1 2 3 4 5 6
|
Telephone Number |
86-76********
|
1 2 3 4 5 6
|
Fax Number |
86-76********
|
1 2 3 4 5 6
|
E-mail |
s******@newbtl.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6
|
Firm Name |
BTL Inc.
|
1 2 3 4 5 6
|
Name |
M****** W********
|
1 2 3 4 5 6
|
Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
1 2 3 4 5 6
|
China
|
1 2 3 4 5 6
|
Telephone Number |
86-76********
|
1 2 3 4 5 6
|
Fax Number |
86-76********
|
1 2 3 4 5 6
|
E-mail |
m******@newbtl.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | No |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | DTS - Digital Transmission System |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC750 Plus WiFi Range Extender, AC1200 WiFi Range Extender |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Does not apply |
1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 | Original Equipment |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | C2PC as add power board.
Output Power listed is average conducted.
This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.
Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.
RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.
End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 | C2PC as add power board.
Output Power listed is peak conducted.
This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.
Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.
RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.
End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
1 2 3 4 5 6 | C2PC: The heat sink of the product is changed.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5210 MHz and 5775 MHz. |
1 2 3 4 5 6 | C2PC: The heat sink of the product is changed.
Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40 MHz bandwidth modes. |
1 2 3 4 5 6 | Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40 MHz bandwidth modes. |
1 2 3 4 5 6 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5210 MHz and 5775 MHz. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
BTL Inc.
|
1 2 3 4 5 6
|
Name |
S******** H****
|
1 2 3 4 5 6
|
D****** D******
|
1 2 3 4 5 6
|
Telephone Number |
+86-7******** Extension:
|
1 2 3 4 5 6
|
86-76******** Extension:
|
1 2 3 4 5 6
|
00867******** Extension:
|
1 2 3 4 5 6
|
Fax Number |
86-76********
|
1 2 3 4 5 6
|
0086 ********
|
1 2 3 4 5 6
|
E-mail |
S******@newbtl.com
|
1 2 3 4 5 6
|
s******@newbtl.com
|
1 2 3 4 5 6
|
d******@btl.org.cn
|
|