app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2016-11-29
|
1 2 3 4 5
|
2016-05-24
|
1 2 3 4 5
|
2015-05-27
|
1 2 3 4 5
|
Applicant's complete, legal business name |
D-Link Corporation
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0007371172
|
1 2 3 4 5
|
Physical Address |
17595 Mt. Herrmann
|
1 2 3 4 5
|
Fountain Valley
|
1 2 3 4 5
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
c******@telefication.com
|
1 2 3 4 5
|
T******@TIMCOENGR.COM
|
1 2 3 4 5
|
t******@timcoengr.com
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
KA2
|
1 2 3 4 5
|
Equipment Product Code |
IR895LA1
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
B******** A****
|
1 2 3 4 5
|
Title |
General Counsel
|
1 2 3 4 5
|
Telephone Number |
714-8********
|
1 2 3 4 5
|
Fax Number |
866-7********
|
1 2 3 4 5
|
E-mail |
b******@dlink.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5
|
Name |
S******** J******
|
1 2 3 4 5
|
Physical Address |
No.8, Lane 724, Bo-ai St.
|
1 2 3 4 5
|
Taiwan
|
1 2 3 4 5
|
Telephone Number |
886-3********
|
1 2 3 4 5
|
Fax Number |
886-3********
|
1 2 3 4 5
|
E-mail |
s******@sporton.com.tw
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5
|
Name |
S**** J****
|
1 2 3 4 5
|
Physical Address |
No.8, Lane 724, Bo-ai St.
|
1 2 3 4 5
|
Taiwan
|
1 2 3 4 5
|
Telephone Number |
886-3********
|
1 2 3 4 5
|
Fax Number |
886-3********
|
1 2 3 4 5
|
E-mail |
s******@sporton.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 | Yes |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 | DTS - Digital Transmission System |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AC5300 Ultra Wi-Fi Router |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 | Modular Equipment Type | Does not apply |
1 2 3 4 5 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | Class II Permissive Change : This change is replacement of a chip with pin-for-pin compatible and no change in radio parameters.
Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes. |
1 2 3 4 5 | Class II Permissive Change : This change is replacement of a chip with pin-for-pin compatible and no change in radio parameters.
Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40MHz and 20/40/80MHz bandwidth modes in 2.4GHz and 5.8GHz bands, respectively. |
1 2 3 4 5 | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as
described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes. |
1 2 3 4 5 | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40MHz and 20/40/80MHz bandwidth modes in 2.4GHz and 5.8GHz bands, respectively. |
1 2 3 4 5 | Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 31 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
SPORTON International Inc.
|
1 2 3 4 5
|
Sporton International Inc.
|
1 2 3 4 5
|
Name |
S**** J****
|
1 2 3 4 5
|
A******** C******
|
1 2 3 4 5
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5
|
886-3******** Extension:
|
1 2 3 4 5
|
Fax Number |
886-3********
|
1 2 3 4 5
|
886-3********
|
1 2 3 4 5
|
E-mail |
s******@sporton.com.tw
|
1 2 3 4 5
|
a******@sporton.com.tw
|
|