CISCO IP Phone 88611057

Cisco Systems Inc

Application Exhibits

Users Manual

frequency equipment class purpose
1 2016-06-02 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2014-06-11 5775 ~ 5775 DTS - Digital Transmission System Original Equipment
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 5530 ~ 5530 NII - Unlicensed National Information Infrastructure TX
app s submitted / available
1 2 3 4 User Manual Users Manual pdf 3.84 MiB October 06 2014
1 2 3 4 Cover Letter(s) pdf February 06 2016
1 2 3 4 Cover Letter(s) pdf February 06 2016
1 2 3 4 Cover Letter(s) pdf February 06 2016
1 2 3 4 Test Setup Photos pdf February 06 2016
1 2 3 4 Test Report pdf February 06 2016
1 2 3 4 Cover Letter(s) pdf October 06 2014 / November 06 2014
1 2 3 4 External Photos pdf October 06 2014
1 2 3 4 Internal Photos pdf October 06 2014
1 2 3 4 ID Label/Location Info pdf October 06 2014 / November 06 2014
1 2 3 4 RF Exposure Info pdf October 06 2014 / November 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014
1 2 3 4 Test Setup Photos pdf October 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014
1 2 3 4 Attestation Statements pdf October 06 2014 / November 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014
1 2 3 4 Test Report pdf October 06 2014 / November 06 2014

Application Forms

app s Applicant Information
1 2 3 4 Effective 2016-06-02
1 2 3 4 2014-06-11
1 2 3 4 Applicant's complete, legal business name Cisco Systems Inc
1 2 3 4 FCC Registration Number (FRN) 0004968939
1 2 3 4 Physical Address 125 West Tasman Drive
1 2 3 4 San Jose, CA
1 2 3 4 United States
app s TCB Information
1 2 3 4 TCB Application Email Address h******@acbcert.com
1 2 3 4 H******@acbcert.com
1 2 3 4 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 Grantee Code LDK
1 2 3 4 Equipment Product Code 88611057
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 Name G****** T******
1 2 3 4 Title Manager, Engineering
1 2 3 4 Telephone Number 408-5********
1 2 3 4 Fax Number 408-5********
1 2 3 4 E-mail g******@cisco.com
app s Technical Contact
1 2 3 4 Firm Name CISCO Systems, Inc.
1 2 3 4 Cisco Systems, Inc.
1 2 3 4 Name J**** A******
1 2 3 4 Physical Address 285 West Tasman Drive
1 2 3 4 San Jose, California 95134
1 2 3 4 United States
1 2 3 4 Telephone Number 40852********
1 2 3 4 Fax Number 40852********
1 2 3 4 E-mail j******@cisco.com
app s Non Technical Contact
1 2 3 4 Firm Name CISCO Systems, Inc.
1 2 3 4 Name L******** B********
1 2 3 4 Physical Address 285 West Tasman Drive
1 2 3 4 San Jose, California 95134
1 2 3 4 United States
1 2 3 4 Telephone Number 40885********
1 2 3 4 E-mail l******@cisco.com
app s Confidentiality (long or short term)
1 2 3 4 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 4 Yes
1 2 3 4 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)07/26/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 Equipment ClassNII - Unlicensed National Information Infrastructure TX
1 2 3 4 DTS - Digital Transmission System
1 2 3 4 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)CISCO IP Phone
1 2 3 4 Cisco IP Phone
1 2 3 4 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 Modular Equipment TypeDoes not apply
1 2 3 4 Purpose / Application is forClass II Permissive Change
1 2 3 4 Original Equipment
1 2 3 4 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 Grant CommentsPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(i) for devices with no changes to hardware or output power.
1 2 3 4 Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter has 20 MHz, 40 MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25GHz 5.47-5.725GHz bands and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
1 2 3 4 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 Firm Name Cisco Systems, Inc.
1 2 3 4 Name G****** T****
1 2 3 4 Telephone Number 408-5********
1 2 3 4 Fax Number 40852********
1 2 3 4 E-mail g******@cisco.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E 38 68 CC 5180 5240 0.0242
1 2 15E 38 68 CC 5190 5230 0.0202
1 3 15E 38 68 CC 5210 5210 0.0182
1 4 15E 38 68 CC ND 5260 5320 0.0252
1 5 15E 38 68 CC ND 5270 5310 0.0201
1 6 15E 38 68 CC ND 5290 5290 0.0114
1 7 15E 38 68 CC ND 5500 5700 0.0219
1 8 15E 38 68 CC ND 5510 5670 0.0198
1 9 15E 38 68 CC ND 5530 5530 0.017
1 1 15E 38 68 CC 5745 5825 0.037
1 11 15E 38 68 CC 5755 5795 0.017
1 12 15E 38 68 CC 5775 5775 0.019
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C 68 CC 2412 2462 0.0428
2 2 15C 68 CC 2422 2452 0.0237
2 3 15C 68 CC 5745 5825 0.0329
2 4 15C 68 CC 5755 5795 0.0193
2 5 15C 68 CC 5775 5775 0.0189
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C 68 CC 2402.00000000 2480.00000000 0.0036000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E 68 CC 5180 5240 0.0242
4 2 15E 68 CC 5190 5230 0.0202
4 3 15E 68 CC 5210 5210 0.0182
4 4 15E 68 CC ND 5260 5320 0.0252
4 5 15E 68 CC ND 5270 5310 0.0201
4 6 15E 68 CC ND 5290 5290 0.0114
4 7 15E 68 CC ND 5500 5700 0.0219
4 8 15E 68 CC ND 5510 5670 0.0198
4 9 15E 68 CC ND 5530 5530 0.017

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC