app
s
|
Applicant Information
|
|
various
|
Effective |
2017-07-19
|
various
|
2017-04-05
|
various
|
2017-03-29
|
various
|
2017-03-28
|
various
|
2017-01-07
|
various
|
2016-08-18
|
various
|
2016-07-30
|
various
|
2016-05-25
|
various
|
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
various
|
FCC Registration Number (FRN) |
0005821988
|
various
|
Physical Address |
4F, No. 150, Li-Te Rd.
|
various
|
Peitou, Taipei, 112
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
MSQ
|
various
|
Equipment Product Code |
8260D2
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J**** Y****
|
various
|
Title |
Associate Vice President
|
various
|
Telephone Number |
+886-********
|
various
|
Fax Number |
+886-********
|
various
|
E-mail |
j******@asus.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
QuieTek Corporation
|
various
|
Name |
V**** W********
|
various
|
V****** W******
|
various
|
M****** C****
|
various
|
Physical Address |
No. 5-22, Rueishu Keng, Linkou Dist.
|
various
|
No.159, Sec. 2, Wenhua 1st Rd., Linkou Dist
|
various
|
No.159, Sec. 2, Wenhua 1st Rd., Linkou Dist.
|
various
|
No. 5-22, Ruishukeng, Linkou Dist
|
various
|
No. 5-22, Ruishukeng, Linkou Dist.
|
various
|
New Taipei City, 24451
|
various
|
New Taipei City
|
various
|
New Taipei City, 244
|
various
|
New Taipei City, 24457
|
various
|
Taiwan
|
various
|
Finland
|
various
|
Telephone Number |
886-2******** Extension:
|
various
|
886-2******** Extension:
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
886-2********
|
various
|
E-mail |
v******@dekra.com
|
various
|
v******@quietek.com
|
various
|
m******@quietek.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 8260 |
various | Wireless Network Adapter |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Change in identification of presently authorized equipment. Original FCC ID: PD98260D2 Grant Date: 05/26/2015 |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX370U, Q325U and ZENBOOK-FP, with antenna INPAQ, part no. MDA-LBLB-04-002, 14008-02340300.
The highest measured body SAR values are: 1.06 W/kg. Simultaneous TX: 1.22 W/kg. |
various | Power output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX370U, Q325U and ZENBOOK-FP, with antenna INPAQ, part no. MDA-LBLB-04-002, 14008-02340300.
The highest body SAR values are: 1.09 W/kg. Simultaneous TX: 1.17 W/kg. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX370U, Q325U and ZENBOOK-FP, with antenna INPAQ, part no. MDA-LBLB-04-002, 14008-02340300. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400.
The highest measured body SAR values are: 0.53 W/kg. Simultaneous TX: 0.64 W/kg. |
various | Power output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400.
The highest body SAR values are: 1.18 W/kg. Simultaneous TX: 1.29 W/kg. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Tablet PC, model number: ASUS Q325U, with antenna INPAQ, part no. MDA-LBLB-04-001, 14008-02340000.
The highest measured body SAR values are: 0.97 W/kg. Simultaneous TX: 1.19 W/kg. |
various | Power output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Tablet PC, model number: ASUS Q325U, with antenna INPAQ, part no. MDA-LBLB-04-001, 14008-02340000.
The highest body SAR values are: 0.39 W/kg. Simultaneous TX: 0.62 W/kg. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Tablet PC, model number: ASUS Q325U, with antenna INPAQ, part no. MDA-LBLB-04-001, 14008-02340000. |
various | Power output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Tablet PC, model number: ASUS T304U, with antenna ACON, part no. APF5Y-100000, APP6Y-100031, 14008-02140100, 14008-02140000 and INPAQ, part no. WA-F-LB-01-041, WA-P-LB-02-395, 14008-02140300, 14008-02140200.
The highest measured body SAR values are: 1.02 W/kg. Simultaneous TX: 1.44 W/kg. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Tablet PC, model number: ASUS T304U, with antenna ACON, part no. APF5Y-100000, APP6Y-100031, 14008-02140100, 14008-02140000 and INPAQ, part no. WA-F-LB-01-041, WA-P-LB-02-395, 14008-02140300, 14008-02140200. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Tablet PC, model number: ASUS T304U, with antenna ACON, part no. APF5Y-100000, APP6Y-100031, 14008-02140100, 14008-02140000 and INPAQ, part no. WA-F-LB-01-041, WA-P-LB-02-395, 14008-02140300, 14008-02140200.
The highest measured body SAR values are: 1.01 W/kg. Simultaneous TX: 1.13 W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host notebook PC, model number: ASUS UX390U and ZenBook3U, with antenna Hong Bo, part no. 00-3201003600, 14008-02050300 and LUXSHARE, part no. LA0002RF017, 14008-02050200.
The highest measured body SAR values are: 1.07 W/kg. Simultaneous TX: 0.70 W/kg. |
various | Power output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host notebook PC, model number: ASUS UX390U and ZenBook3U, with antenna Hong Bo, part no. 00-3201003600, 14008-02050300 and LUXSHARE, part no. LA0002RF017, 14008-02050200.
The highest measured body SAR values are: 0.79 W/kg. Simultaneous TX: 0.96 W/kg. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host notebook PC, model number: ASUS UX390U and ZenBook3U, with antenna Hong Bo, part no. 00-3201003600, 14008-02050300 and LUXSHARE, part no. LA0002RF017, 14008-02050200. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change to reduce WLAN output power by firmware. |
various | Power output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change to reduce output power by firmware and to ensure compliance to the new U-NII rules as modified by MO&O FCC 16-24. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 12 mm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change to reduce WLAN output power by firmware. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and must be
used in accordance with FCC multi-transmitter product procedures. End-users and
installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must be used in accordance with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrators to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations
as described in this filing. OEM/Host integrators must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must be used in accordance with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrators to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration,
enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as
described in this filing. OEM/Host integrators must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA Testing and Certification Co., Ltd.
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Name |
S**** H****
|
various
|
Telephone Number |
886-2******** Extension:
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
+886-********
|
various
|
E-mail |
s******@quietek.com
|
various
|
s******@dekra.com
|
|