app
s
|
Applicant Information
|
|
various
|
Effective |
2016-09-23
|
various
|
2016-09-08
|
various
|
2016-09-06
|
various
|
2016-09-05
|
various
|
2016-09-03
|
various
|
2016-08-08
|
various
|
2016-08-03
|
various
|
2016-05-27
|
various
|
2016-05-23
|
various
|
2016-03-15
|
various
|
2016-03-07
|
various
|
2016-01-27
|
various
|
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
various
|
FCC Registration Number (FRN) |
0005821988
|
various
|
Physical Address |
4F, No. 150, Li-Te Rd.
|
various
|
Peitou, Taipei
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
h******@acbcet.com
|
various
|
h******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
MSQ
|
various
|
Equipment Product Code |
8260NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J**** Y****
|
various
|
Title |
Associate Vice President
|
various
|
Telephone Number |
+886-********
|
various
|
Fax Number |
+886-********
|
various
|
E-mail |
j******@asus.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
QuieTek Corporation
|
various
|
QuieTek
|
various
|
Name |
M****** C****
|
various
|
Physical Address |
No. 5-22, Rueishu Keng, Linkou Dist.
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
No. 5-22, Ruishukeng, Linkou Dist.
|
various
|
New Taipei City
|
various
|
New Taipei City, 24451
|
various
|
New Taipei City, 244
|
various
|
24451
|
various
|
Taiwan
|
various
|
Telephone Number |
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
E-mail |
m******@quietek.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/11/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 8260 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Change in Identification |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(i) with no changes to hardware or output power. (05//23/2016)
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS UX330U, U3100, U330U and U3000U, with antenna TongDa, part no. T-543-3010690-A and 14008-01900500; and INPAQ, part no. WA-F-LBLB-02-015 and 14008-01900400. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.8 W/kg and 0.97 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS UX330U, U3100, U330U and U3000U, with antenna TongDa, part no. T-543-3010690-A and 14008-01900500; and INPAQ, part no. WA-F-LBLB-02-015 and 14008-01900400. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS UX330U, U3100, U330U and U3000U, with antenna TongDa, part no. T-543-3010690-A and 14008-01900500; and INPAQ, part no. WA-F-LBLB-02-015 and 14008-01900400. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.55 W/kg and 0.7 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS UX360U and Q324U, with antenna Hong Bo, part no. 260-26116 and 14008-01720200; and LUXSHARE, part no. LA38LN001-1H and 14008- 01720300. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS UX360U and Q324U, with antenna Hong Bo, part no. 260-26116 and 14008-01720200; and LUXSHARE, part no. LA38LN001-1H and 14008- 01720300. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 1.14 W/kg and 1.1 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(i) with no changes to hardware or output power. (05//23/2016)
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS UX360U and Q324U, with antenna Hong Bo, part no. 260-26116 and 14008-01720200; and LUXSHARE, part no. LA38LN001-1H and 14008-01720300. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 1.19 W/kg and 1.05 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS UX330C, U3000C and U330C, with antenna TongDa, part no. T-543-3010610-A and 14008-01900300; and INPAQ, part no. WA-F-LBLB-02- 012 and 14008-001900200. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.89 W/kg and 1.06 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS UX330C, U3000C and U330C, with antenna TongDa, part no. T-543-3010610-A and 14008-01900300; and INPAQ, part no. WA-F-LBLB-02- 012 and 14008-001900200. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(i) with no changes to hardware or output power. (05//23/2016)
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS UX330C, U3000C and U330C, with antenna TongDa, part no. T-543-3010610-A and 14008-01900300; and INPAQ, part no. WA-F-LBLB-02-012 and 14008-001900200. And to reduce the power output for 2.4G/5G WLAN transmitters through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 1.19 W/kg and 1.36 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS Q524U and Q534U, with antenna Hong Lin, part no. 260-26107, 260-26108, 14008-01840600 and 14008-0184700; and INPAQ, part no. WA- F-LB-02-079, WA-F-LB-01-035, 14008-01840400 and 14008-01840500. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.99 W/kg and 0.72 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(i) with no changes to hardware or output power. (05//23/2016)
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS Q524U and Q534U, with antenna Hong Lin, part no. 260-26107, 260-26108, 14008-01840600 and 14008-0184700; and INPAQ, part no. WA-F-LB-02-079, WA-F-LB-01-035, 14008-01840400 and 14008-01840500. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.80 W/kg and 0.97 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively. To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS Q524U and Q534U, with antenna Hong Lin, part no. 260-26107, 260-26108, 14008-01840600 and 14008-0184700; and INPAQ, part no. WA- F-LB-02-079, WA-F-LB-01-035, 14008-01840400 and 14008-01840500. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS TP501U, J501U and R518U, with antenna Luxshare, part no. LA05RF873-2H and LA05RF873-1H; and INPAQ, part no. WA-P-LB-02-300 and WA-P-LB-01-141. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.95 W/kg and 1.12 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model numbers: ASUS TP501U, J501U and R518U, with antenna Luxshare, part no. LA05RF873-2H and LA05RF873-1H; and INPAQ, part no. WA-P-LB-02-300 and WA-P-LB-01-141. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(i) with no changes to hardware or output power. (05//23/2016)
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS TP501U, J501U and R518U, with antenna Luxshare, part no. LA05RF873-2H and LA05RF873-1H; and INPAQ, part no. WA-P-LB-02-300 and WA-P-LB-01-141. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 1.01 W/kg and 0.96 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS Q504U, with antenna Hong Lin, part no. 260-26109, 260-26110, 14008-01840200, 14008-01840300 and INPAQ, part no. WA-F-LB-02-080, WA-F-LB- 01-036, 14008-01840000, 14008-01840100. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS Q504U, with antenna Hong Lin, part no. 260-26109, 260-26110, 14008-01840200, 14008-01840300 and INPAQ, part no. WA-F-LB-02-080, WA-F-LB- 01-036, 14008-01840000, 14008-01840100. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.70 W/kg and 0.87 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(i) with no changes to hardware or output power. (05//23/2016)
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS Q504U, with antenna Hong Lin, part no. 260-26109, 260-26110, 14008-01840200, 14008-01840300 and INPAQ, part no. WA-F-LB-02-080, WA-F-LB- 01-036, 14008-01840000, 14008-01840100. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 0.61 W/kg and 0.78 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS Q304U, with antenna Hong Lin, part no. 260-26104, 260- 26105, 14008-01790000, 14008-01790100 and INPAQ, part no. WA-F-LB-02-078, WA-F-LB- 01-034, 14008-01790200, 14008-01790300. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 1.18 W/kg and 1.35 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(i) with no changes to hardware or output power. (05//23/2016)
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS Q304U, with antenna Hong Lin, part no. 260-26104, 260- 26105, 14008-01790000, 14008-01790100 and INPAQ, part no. WA-F-LB-02-078, WA-F-LB- 01-034, 14008-01790200, 14008-01790300. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. The highest reported SAR for body-worn and simultaneous transmission exposure conditions are: 1.14 W/kg and 1.31 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change with requesting approval for portable category specific host tablet PC, model number: ASUS Q304U, with antenna Hong Lin, part no. 260-26104, 260- 26105, 14008-01790000, 14008-01790100 and INPAQ, part no. WA-F-LB-02-078, WA-F-LB- 01-034, 14008-01790200, 14008-01790300. And to reduce the power output for 2.4G/5G WLAN transmitters with PAD mode through firmware, as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek UX360C, with antenna LUXSHARE, part no. LA81RF001-1H (Main), LA81RF001-1H (Aux) and Hong Lin, part no. 260-26090 (Main), 260-26090 (Aux). Highest reported Body and Simultaneous SAR values are: 1.11W/kg and 1.28W/kg respectively. (03/15/2016)
Class II Permissive Change: For device previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b) (4)(ii) with no changes to hardware or output powers. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not be used except in accordance with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration,
enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as
described in this filing. OEM/Host integrators must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular standalone SAR evaluation to establish
minimum 5mm antenna to user separation distance at a maximum SAR value
<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01
General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01.
Class II Permissive Change: For devices previously authorized under § 15.247 to be modified to operate under the New Rules and the technical requirements of §15.407(b)(4)(i) with no changes to hardware or output power. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2
MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product.
Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek UX360C, with antenna LUXSHARE, part no. LA81RF001-1H (Main), LA81RF001-1H (Aux) and Hong Lin, part no. 260-26090 (Main), 260-26090 (Aux)
Highest reported Body and Simultaneous SAR values are: 1.11W/kg and 1.28W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek UX360C, with antenna LUXSHARE, part no. LA81RF001-1H (Main), LA81RF001-1H (Aux) and Hong Lin, part no. 260-26090 (Main), 260-26090 (Aux)
Highest reported Body and Simultaneous SAR values are: 1.07W/kg and 1.24W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for
this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek UX360C, with antenna LUXSHARE, part no. LA81RF001-1H (Main), LA81RF001-1H (Aux) and Hong Lin, part no. 260-26090 (Main), 260-26090 (Aux)
Highest reported Body and Simultaneous SAR values are: 0.17W/kg and 1.28W/kg respectively. |
various | Class II Permissive Change for Reduce WLAN Output Power of 5GHz through firmware and to request approval for portable category specific host tablet PC, model number: ASUSTek UX360C, with antenna LUXSHARE, part no. LA81RF001-1H (Main), LA81RF001-1H (Aux) and Hong Lin, part no. 260-26090 (Main), 260-26090 (Aux) |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change is to request approval for portable category specific host tablet PC, model number: ASUSTek T302C, with antenna Acon part number ANF6Y-100018 (Tx1), ANF6Y-100019 (Tx2) and INPAQ, part no. WA-F-LB-01-033 (TX1), WA-F-LB-02-076 (TX2).
Highest reported Body and Simultaneous SAR values are: 0.34W/kg and 0.21W/kg respectively. |
various | Class II Permissive Change is to request approval for portable category specific host tablet PC, model number: ASUSTek T302C, with antenna Acon part number ANF6Y-100018 (Tx1), ANF6Y-100019 (Tx2) and INPAQ, part no. WA-F-LB-01-033 (TX1), WA-F-LB-02-076 (TX2). |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for
this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change is to request approval for portable category specific host tablet PC, model number: ASUSTek T302C, with antenna Acon part number ANF6Y-100018 (Tx1), ANF6Y-100019 (Tx2) and INPAQ, part no. WA-F-LB-01-033 (TX1), WA-F-LB-02-076 (TX2).
Highest reported Body and Simultaneous SAR values are: 0.02W/kg and 0.43W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2
MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product.
Class II Permissive Change is to request approval for portable category specific host tablet PC, model number: ASUSTek T302C, with antenna Acon part number ANF6Y-100018 (Tx1), ANF6Y-100019 (Tx2) and INPAQ, part no. WA-F-LB-01-033 (TX1), WA-F-LB-02-076 (TX2).
Highest reported Body and Simultaneous SAR values are: 0.74W/kg and 0.43W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand­alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value
<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01
General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand­alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value
<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01
General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand­alone SAR evaluation to establish
minimum 5mm antenna to user separation distance at a maximum SAR value
<0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01
General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Name |
S**** H****
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
886-2********
|
various
|
E-mail |
s******@dekra.com
|
various
|
s******@quietek.com
|
|