app
s
|
Applicant Information
|
|
various
|
Effective |
2023-08-09
|
various
|
2021-08-16
|
various
|
2021-02-01
|
various
|
2020-04-14
|
various
|
2019-06-28
|
various
|
2018-11-07
|
various
|
2018-09-21
|
various
|
2018-06-29
|
various
|
2018-04-27
|
various
|
2018-03-08
|
various
|
2017-12-21
|
various
|
2017-09-29
|
various
|
2016-11-08
|
various
|
Applicant's complete, legal business name |
Silex Technology, Inc.
|
various
|
FCC Registration Number (FRN) |
0013616305
|
various
|
Physical Address |
2-3-1 Hikaridai, Seika-cho, Soraku-gun
|
various
|
2-3-1 Hikaridai,Seika-cho Sourakugun
|
various
|
Kyoto, N/A 619-0237
|
various
|
Kyoto, N/A
|
various
|
Kyoto
|
various
|
Japan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
L******@ul.com
|
various
|
c******@telefication.com
|
various
|
h******@acbcert.com
|
various
|
t******@siemic.com
|
various
|
e******@ul.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
N6C
|
various
|
Equipment Product Code |
SDMAC
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
Y**** N******
|
various
|
T**** K********
|
various
|
Title |
General Manager
|
various
|
Manager
|
various
|
Telephone Number |
81 77********
|
various
|
Fax Number |
81 77********
|
various
|
E-mail |
n******@silex.jp
|
various
|
k******@silex.jp
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
UL Japan, Inc.
|
various
|
SGS Taiwan Ltd.
|
various
|
SGS Taiwan Ltd
|
various
|
MRT Technology (Suzhou) Co., Ltd
|
various
|
Name |
S**** M********
|
various
|
J******** C****
|
various
|
R******** W******
|
various
|
W****** C******
|
various
|
T**** T********
|
various
|
Physical Address |
4383-326 Asama-cho, Ise-shi
|
various
|
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
134, Wu Kung Rd.
|
various
|
D8 Building, Youxin Industrial Park, No.2
|
various
|
No. 134, Wu Kung Road, Wuku District
|
various
|
Mie-ken, 516-0021
|
various
|
SuZhou, 215104
|
various
|
Japan
|
various
|
Taiwan
|
various
|
China
|
various
|
Telephone Number |
81-59********
|
various
|
+8862******** Extension:
|
various
|
88622********
|
various
|
886 2********
|
various
|
86-51******** Extension:
|
various
|
88622******** Extension:
|
various
|
Fax Number |
81-59********
|
various
|
88622********
|
various
|
886 2********
|
various
|
86-51********
|
various
|
E-mail |
S******@ul.com
|
various
|
j******@sgs.com
|
various
|
r******@mrt-cert.com
|
various
|
w******@sgs.com
|
various
|
T******@ul.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
SGS Taiwan Ltd.
|
various
|
SGS Taiwan Ltd
|
various
|
MRT Technology (Suzhou) Co., Ltd
|
various
|
Name |
J****** C******
|
various
|
R**** W****
|
various
|
W**** C******
|
various
|
Physical Address |
134, Wu Kung Road, WuKu Industrial Zone
|
various
|
134, Wu Kung Rd.
|
various
|
D8 Building, Youxin Industrial Park, No.2
|
various
|
No. 134, Wu Kung Road, Wuku District
|
various
|
SuZhou, 214000
|
various
|
Taiwan
|
various
|
China
|
various
|
Telephone Number |
+8862******** Extension:
|
various
|
88622********
|
various
|
886 2********
|
various
|
86-51******** Extension:
|
various
|
88622******** Extension:
|
various
|
Fax Number |
88622********
|
various
|
886 2********
|
various
|
86-51********
|
various
|
E-mail |
j******@sgs.com
|
various
|
r******@mrt-cert.com
|
various
|
w******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/06/2024 |
various | 02/02/2022 |
various | 10/04/2020 |
various | 12/26/2019 |
various | 04/02/2019 |
various | 05/08/2017 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SDIO Wireless Module |
various | Embedded wireless module |
various | Embeded wireless module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Yes |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Class II Permissive Change to add specific antennas and restrict to specific operation mode described in the filing (Limited to the Wireless LAN mode(2.4GHz)). Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz and 40 MHz bandwidth modes. |
various | C2PC: This change is for adding new antenna with the same types and lower gains as be described in the filling and disabling the 802.11ac mode and BT function via software.
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation
must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
various | This change is for adding new antenna with the same types and lower gains as be described in the filling and disabling the 802.11ac mode and BT via software.
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | Class II Permissive Change to add specific antennas and partial outpower reduction described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Compliance of this device in all final host configurations is the responsibility of the Grantee. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator is instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. This device has 20 MHz and 40 MHz bandwidth modes. |
various | C2PC: Adding new antennas with the same types and lower gains as be described in the filling.
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC: Adding new antennas with the same types and lower gains as be described in the filling.
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC: Adding new antennas with the same types and lower gains as be described in the filling.
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation
must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
various | C2PC: Enable channels 144(HT20), 142(HT40, 138(HT80) in UNII bands. Add Pifa antenna.
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation
must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
various | Class 2 Permissive Change : (1) Firmware is modified to enable function of Radar Detection. (2) To add antennas with the same types and lower gain values.
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01. |
various | Class II Permissive Change for using in the portable host of thermal printer.
Output power is conducted. Single Modular Approval. This device and associated FCC ID label(s) are to be installed in the specific thermal printer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device and its antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements.
This module contains BLE, 2.4G WLAN and 5G WLAN transmitters. |
various | Class II Permissive Change for using in the portable host of thermal printer.
Output power is conducted. Single Modular Approval. This device and associated FCC ID label(s) are to be installed in the specific thermal printer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device and its antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 1.24 W/kg and 1.28 W/kg, respectively.
This module has 20 MHz and 40 MHz bandwidth modes. This module contains Bluetooth and 5G WLAN transmitters. |
various | Class II Permissive Change for using in the portable host of thermal printer.
Output power is conducted. Single Modular Approval. This device and associated FCC ID label(s) are to be installed in the specific thermal printer shown in this filing only by OEM or OEM integrators - user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device and its antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. The highest reported SAR values for body-worn accessory and simultaneous transmission conditions are 0.52 W/kg and 1.28 W/kg, respectively.
This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This module contains Bluetooth, BLE and 2.4G WLAN transmitters. |
various | C2PC to add Taoglas FXP840.07.0055B Monopole Antenna.
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC to add Taoglas FXP840.07.0055B Monopole Antenna.
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
various | C2PC to add Taoglas FXP840.07.0055B Monopole Antenna
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC to add Ethertronics Antenna models: 1004075, 1004078.
Original grant comment:
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
various | C2PC to add Ethertronics Antenna models: 1004075, 1004078.
Original grant comment:
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC to add Ethertronics Antenna models: 1004075, 1004078.
Original grant comment:
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC: Adding different antenna types, which are described in the filling.
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC: Adding different antenna types, which are described in the filling.
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation
must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device
in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to
ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing
and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report
and KDB 905462 D01 as a Client only without Radar Detection. |
various | C2PC to add an Antenna Factor: ant-db1-raf-rps antenna.
Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | C2PC to add an Antenna Factor: ant-db1-raf-rps antenna.
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
various | C2PC
Bluetooth Disabled.
Single Modular Approval. Output power listed is Conducted(Peak). For professional
installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and endusers must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be colocated or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions |
various | C2PC
Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and
KDB 905462 D01 as a Client only without Radar Detection. |
various | Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
various | Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
UL Japan, Inc.(Ise)
|
various
|
SGS Taiwan Ltd. Electromagnetic Compatibility Lab
|
various
|
SGS Taiwan Ltd. Electronics & Communication Lab
|
various
|
Compliance Certification Services Inc. Wugu Lab.
|
various
|
MRT Technology (Suzhou) Co., Ltd.
|
various
|
Bureau Veritas Consumer Products Services, Inc.
|
various
|
UL Japan, Inc. Head office EMC Lab.
|
various
|
Name |
T****** S********
|
various
|
T****** W********
|
various
|
R****** W********
|
various
|
H****** L********
|
various
|
M******** C****
|
various
|
L****** B****
|
various
|
T**** H********
|
various
|
Telephone Number |
81-59********
|
various
|
88622******** Extension:
|
various
|
+886-******** Extension:
|
various
|
886-2******** Extension:
|
various
|
+86-5******** Extension:
|
various
|
408-5********
|
various
|
+81-5********
|
various
|
Fax Number |
81-59********
|
various
|
+8863********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
408 5********
|
various
|
+81-5********
|
various
|
E-mail |
T******@ul.com
|
various
|
T******@sgs.com
|
various
|
r******@sgs.com
|
various
|
h******@sgs.com
|
various
|
m******@mrt-cert.com
|
various
|
l******@siemic.com
|
various
|
T******@jp.ul.com
|
|