app
s
|
Applicant Information
|
|
1
|
Effective |
2015-07-14
|
1
|
Applicant's complete, legal business name |
ELPRO Technologies Pty Ltd
|
1
|
FCC Registration Number (FRN) |
0013674825
|
1
|
Physical Address |
9/12 Billabong Street
|
1
|
1544
|
1
|
Queensland, N/A 4053
|
1
|
Australia
|
|
app
s
|
TCB Information
|
1
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1
|
Grantee Code |
O9P
|
1
|
Equipment Product Code |
S2900
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1
|
Name |
H**** C******
|
1
|
Title |
Engineering Manager
|
1
|
Telephone Number |
0061-********
|
1
|
Fax Number |
0061-********
|
1
|
E-mail |
j******@elpro.com.au
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 |
Is this application for software defined/cognitive radio authorization? | No |
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Modem Module |
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 | Modular Equipment Type | Limited Single Modular Approval |
1 | Purpose / Application is for | Original Equipment |
1 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 | Grant Comments | Limited Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for fixed or mobile applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is incorporated into a finished product described within the application filing documents. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used with this device must only be the antennas that were tested in preparation of this application. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. A separation distance of 90 cm must be maintained between the radiating elements and all persons. This device shall only be connected to devices that are covered by either an FCC DoC or are FCC Certified. |
1 | Is there an equipment authorization waiver associated with this application? | No |
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1
|
Firm Name |
EMC Technologies NZ Ltd.
|
1
|
Name |
A****** C********
|
1
|
Telephone Number |
64-9-********
|
1
|
Fax Number |
64-9-********
|
1
|
E-mail |
a******@ihug.co.nz
|
|