|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7
|
Effective |
2019-11-20
|
|
1 2 3 4 5 6 7
|
2013-09-18
|
|
1 2 3 4 5 6 7
|
2013-08-12
|
|
1 2 3 4 5 6 7
|
2012-06-15
|
|
1 2 3 4 5 6 7
|
Applicant's complete, legal business name |
Itron, Inc
|
|
1 2 3 4 5 6 7
|
FCC Registration Number (FRN) |
0017775842
|
|
1 2 3 4 5 6 7
|
Physical Address |
230 W. Tasman Dr.
|
|
1 2 3 4 5 6 7
|
San Jose, California 95134
|
|
1 2 3 4 5 6 7
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7
|
TCB Application Email Address |
c******@micomlabs.com
|
|
1 2 3 4 5 6 7
|
L******@ul.com
|
|
1 2 3 4 5 6 7
|
c******@ccsemc.com
|
|
1 2 3 4 5 6 7
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7
|
Grantee Code |
OWS
|
|
1 2 3 4 5 6 7
|
Equipment Product Code |
NIC714
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7
|
Name |
A**** T******
|
|
1 2 3 4 5 6 7
|
Title |
Regulatory Engineering Manager
|
|
1 2 3 4 5 6 7
|
Telephone Number |
669-7******** Extension:
|
|
1 2 3 4 5 6 7
|
Fax Number |
866-7********
|
|
1 2 3 4 5 6 7
|
E-mail |
A******@itron.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6 7
|
Firm Name |
MiCOM Labs Inc.
|
|
1 2 3 4 5 6 7
|
T.N. Cokenias Consulting
|
|
1 2 3 4 5 6 7
|
Name |
G******** H******
|
|
1 2 3 4 5 6 7
|
T**** C******
|
|
1 2 3 4 5 6 7
|
Physical Address |
575 Boulder Court
|
|
1 2 3 4 5 6 7
|
P.O. Box 1086
|
|
1 2 3 4 5 6 7
|
Pleasanton, California 94566
|
|
1 2 3 4 5 6 7
|
Pleasanton, 94566
|
|
1 2 3 4 5 6 7
|
El Granada, California 94018
|
|
1 2 3 4 5 6 7
|
United States
|
|
1 2 3 4 5 6 7
|
Telephone Number |
92546********
|
|
1 2 3 4 5 6 7
|
650 7********
|
|
1 2 3 4 5 6 7
|
Fax Number |
650 7********
|
|
1 2 3 4 5 6 7
|
E-mail |
g******@micomlabs.com
|
|
1 2 3 4 5 6 7
|
t******@tncokenias.org
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 7 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 6 7 | Yes |
| 1 2 3 4 5 6 7 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/01/2012 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Radio module for electric meter |
| 1 2 3 4 5 6 7 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 | Yes |
| 1 2 3 4 5 6 7 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 7 | Limited Single Modular Approval |
| 1 2 3 4 5 6 7 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 6 7 | Original Equipment |
| 1 2 3 4 5 6 7 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 | Grant Comments | Class II permissive change to replace the SPDT TR switch as described in this filing.
Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 | Class II permissive change to replace the SPDT TR switch as described in this filing.
Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 | Class II permissive change to add a 2.4GHz frequency band by software
as described in this filing.
Output power is conducted. Limited single modular approval due to professional
installation requirements as described in this filing. This device supports
bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM
installation only. The antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other transmitter. OEM integrators
must be provided with antenna installation instructions. OEM integrators and
endusers must be provided with transmitter operation conditions for satisfying RF
exposure compliance. |
| 1 2 3 4 5 6 7 | Class II permissive change to use a different front-end module circuit as described in this filing.
Output power is conducted. Limited single modular approval due to professional
installation requirements as described in this filing. Approval is limited to OEM
installation only. The antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other transmitter. OEM integrators
must be provided with antenna installation instructions. OEM integrators and endusers
must be provided with transmitter operation conditions for satisfying RF
exposure compliance. |
| 1 2 3 4 5 6 7 | Class II permissive change to use a different front-end module circuit as described in this filing.
Output power is conducted. Limited single modular approval due to professional
installation requirements as described in this filing. This device supports
bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM
installation only. The antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other transmitter. OEM integrators
must be provided with antenna installation instructions. OEM integrators and endusers
must be provided with transmitter operation conditions for satisfying RF
exposure compliance. |
| 1 2 3 4 5 6 7 | Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 | Output power is conducted. Limited single modular approval due to professional installation requirements as described in this filing. This device supports bandwidths of 200kHz, 300kHz and 400kHz. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7
|
Firm Name |
MiCOM Labs
|
|
1 2 3 4 5 6 7
|
Bay Area Compliance Laboratories Corporation
|
|
1 2 3 4 5 6 7
|
Compliance Certification Services (UL CCS)
|
|
1 2 3 4 5 6 7
|
Name |
G**** H********
|
|
1 2 3 4 5 6 7
|
L****** T********
|
|
1 2 3 4 5 6 7
|
B**** J******
|
|
1 2 3 4 5 6 7
|
Telephone Number |
925-4********
|
|
1 2 3 4 5 6 7
|
408-7******** Extension:
|
|
1 2 3 4 5 6 7
|
510-7********
|
|
1 2 3 4 5 6 7
|
Fax Number |
925-4********
|
|
1 2 3 4 5 6 7
|
408 7********
|
|
1 2 3 4 5 6 7
|
510-6********
|
|
1 2 3 4 5 6 7
|
E-mail |
g******@micomlabs.com
|
|
1 2 3 4 5 6 7
|
l******@baclcorp.com
|
|
1 2 3 4 5 6 7
|
b******@ccsemc.com
|
|