app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2021-03-10
|
1 2 3 4 5 6
|
2021-02-23
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Mitac Digital Technology Corporation
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0022217111
|
1 2 3 4 5 6
|
Physical Address |
4F., No. 1, R&D Road 2, Hsinchu Science Park
|
1 2 3 4 5 6
|
Hsinchu, N/A
|
1 2 3 4 5 6
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
P4Q
|
1 2 3 4 5 6
|
Equipment Product Code |
N672A
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
R******** C****
|
1 2 3 4 5 6
|
Title |
Director
|
1 2 3 4 5 6
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5 6
|
Fax Number |
886-3********
|
1 2 3 4 5 6
|
E-mail |
R******@mic.com.tw
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/06/2021 |
1 2 3 4 5 6 | 08/22/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 | DTS - Digital Transmission System |
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Smart Module |
1 2 3 4 5 6 | Smart Modul |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 4 5 6 | Single Modular Approval |
1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 | Change in Identification |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
Class II Permissive Change: Authorizing portable mode operation when integrated into the MiTAC/Mio/NAVMAN/Magellan tablet, model N672A. SAR compliance for body-worn operating configurations is limited belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are <0.10 W/kg, <0.10 W/kg, 0.10 W/kg and <0.10 W/kg, respectively. |
1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes.
Class II Permissive Change: Authorizing portable mode operation when integrated into the MiTAC/Mio/NAVMAN/Magellan tablet, model N672A. SAR compliance for body-worn operating configurations is limited belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are <0.10 W/kg, <0.10 W/kg, 0.10 W/kg and <0.10 W/kg, respectively. |
1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
Class II Permissive Change: Authorizing portable mode operation when integrated into the MiTAC/Mio/NAVMAN/Magellan tablet, model N672A. SAR compliance for body-worn operating configurations is limited belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are <0.10 W/kg, 0.11 W/kg, 0.10 W/kg and 0.10 W/kg, respectively. |
1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Sporton International Inc.
|
1 2 3 4 5 6
|
Name |
A**** C****
|
1 2 3 4 5 6
|
Telephone Number |
88633********
|
1 2 3 4 5 6
|
Fax Number |
+886-********
|
1 2 3 4 5 6
|
E-mail |
a******@sporton.com.tw
|
|