app
s
|
Applicant Information
|
|
various
|
Effective |
2018-09-14
|
various
|
2018-08-23
|
various
|
2018-03-19
|
various
|
2018-03-05
|
various
|
2017-10-19
|
various
|
2017-10-17
|
various
|
2017-09-15
|
various
|
2017-09-14
|
various
|
2017-08-31
|
various
|
2017-06-14
|
various
|
2017-03-09
|
various
|
2017-02-21
|
various
|
2016-10-21
|
various
|
2016-10-20
|
various
|
2016-10-18
|
various
|
2016-05-02
|
various
|
2016-04-29
|
various
|
2016-04-27
|
various
|
2016-04-07
|
various
|
2016-02-29
|
various
|
2015-12-03
|
various
|
2015-09-25
|
various
|
2015-09-08
|
various
|
2015-08-21
|
various
|
2015-08-20
|
various
|
2015-06-22
|
various
|
2015-06-10
|
various
|
2015-04-06
|
various
|
2015-01-26
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
various
|
FCC Registration Number (FRN) |
0008035131
|
various
|
Physical Address |
100 Center Point Circle Suite 200
|
various
|
100 Center Point Circle
|
various
|
Columbia
|
various
|
Columbia, 29210
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
h******@ACBcert.com
|
various
|
H******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PD9
|
various
|
Equipment Product Code |
3165NGU
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S**** C****** H********
|
various
|
Title |
Product Regulations Engineer
|
various
|
Telephone Number |
803-3********
|
various
|
Fax Number |
803-2********
|
various
|
E-mail |
s******@intel.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Intel Mobile Communications
|
various
|
RF Exposure Lab
|
various
|
QuieTek Corp.
|
various
|
AT4 Wireless
|
various
|
Name |
S****** H********
|
various
|
J****** M****
|
various
|
M**** C********
|
various
|
R******** O****
|
various
|
Physical Address |
100 Center Point Circle Suite 200
|
various
|
802 North Twin Oaks Valley Rd.
|
various
|
802 N. Twin Oaks Valley Rd. Suite 105
|
various
|
No. 5-22, Rueishu Keng, Linkou Dist.
|
various
|
Parque Tecnologico
|
various
|
Columbia, 29210
|
various
|
Columbia, Pennsylvania 29210
|
various
|
Columbia, Arizona 29210
|
various
|
Columbia, South Carolina 29210
|
various
|
San Marcos, California 92069
|
various
|
San Marcos, 92069
|
various
|
San Marcosc, California 92069
|
various
|
New Taipei City, 24451
|
various
|
Malaga, 29590
|
various
|
United States
|
various
|
Taiwan
|
various
|
United Kingdom
|
various
|
Spain
|
various
|
Telephone Number |
+1803********
|
various
|
+1803********
|
various
|
76047********
|
various
|
80321********
|
various
|
88628********
|
various
|
34952********
|
various
|
Fax Number |
76047********
|
various
|
80321********
|
various
|
88628********
|
various
|
34952********
|
various
|
E-mail |
s******@Intel.com
|
various
|
i******@rfexposurelab.com
|
various
|
S******@Intel.com
|
various
|
m******@quietek.com
|
various
|
r******@at4wireless.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/13/2019 |
various | 02/19/2019 |
various | 09/15/2018 |
various | 09/01/2018 |
various | 04/17/2018 |
various | 04/15/2018 |
various | 03/14/2018 |
various | 03/13/2018 |
various | 02/27/2018 |
various | 12/11/2017 |
various | 09/05/2017 |
various | 08/20/2017 |
various | 04/20/2017 |
various | 04/18/2017 |
various | 10/29/2016 |
various | 10/26/2016 |
various | 10/24/2016 |
various | 10/23/2016 |
various | 10/04/2016 |
various | 08/26/2016 |
various | 05/30/2016 |
various | 03/23/2016 |
various | 02/22/2016 |
various | 02/29/2016 |
various | 02/17/2016 |
various | 02/16/2016 |
various | 12/13/2015 |
various | 12/07/2015 |
various | 10/03/2015 |
various | 07/24/2015 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 3165 |
various | Intel Dual-Band Wireless-AC 3165 |
various | Wireless Network Adapter |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 0.99W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ideapad model S530-13IWL PC with Yageo ANTA0LC12792WLAN1 and ANTA0LC12792WLAN1 and HighTek 0ACCN018004N and 0ACCN018004N antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.49W/kg
and 0.99W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ideapad model S530-13IWL PC with Yageo ANTA0LC12792WLAN1 and ANTA0LC12792WLAN1 and HighTek 0ACCN018004N and 0ACCN018004N antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 0.99W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo ideapad model S530-13IWL PC with Yageo ANTA0LC12792WLAN1 and ANTA0LC12792WLAN1 and HighTek 0ACCN018004N and 0ACCN018004N antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the ideaPad Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the ideaPad Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.70W/kg
and 1.18W/kg respectively.
This change establishes portable category SAR conditions for the ideaPad Lenovo model 730S-13IWL PC with WNC 025.901D0.0011 and 025.901D3.0011 and HighTek 025.901D0.0001 and 025.901D3.0001 antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.34W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model V530s-14IKB 81EX PC with antennas, Luxshare L01RF118-NB-H and L01RF117-NB-H and South Star 64451204800040 and 64451204800020.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.34W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model V530s-14IKB 81EX PC with antennas, Luxshare L01RF118-NB-H and L01RF117-NB-H and South Star 64451204800040 and 64451204800020.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.66W/kg and 1.34W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model V530s-14IKB 81EX PC with antennas, Luxshare L01RF118-NB-H and L01RF117-NB-H and South Star 64451204800040 and 64451204800020.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.41W/kg and
1.52W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo Flex 6-11IGM PC with antennas, Inpaq 64451203800070 and 64451203800050 and antenna South Star 64451203800020 and 64451203800010.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission
of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and
80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying
with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.52W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo Flex 6-11IGM PC with antennas, Inpaq 64451203800070 and 64451203800050 and antenna South Star 64451203800020 and 64451203800010.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.34W/kg and
1.52W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo Flex 6-11IGM PC with antennas, Inpaq 64451203800070 and 64451203800050 and antenna South Star 64451203800020 and 64451203800010.
Antenna is of same type and lower gain from original approval. SAR testing was performed to
demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and
1.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number- Lenovo MIIX 520-12IKB, with antenna Inpaq part no 64451203900050 (Tx1) & 64451203900060 (Tx2) and South Star part no 64451203900010 (Tx1) & 64451203900020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.43W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number- Lenovo MIIX 520-12IKB, with antenna Inpaq part no 64451203900050 (Tx1) & 64451203900060 (Tx2) and South Star part no 64451203900010 (Tx1) & 64451203900020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission
of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and
80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying
with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.05W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number- Lenovo MIIX 520-12IKB, with antenna Inpaq part no 64451203900050 (Tx1) & 64451203900060 (Tx2) and South Star part no 64451203900010 (Tx1) & 64451203900020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.39W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-14IAP, with antenna Inpaq part no WA-F-LB-02-120 (Tx1) & WA-F-LB-02-078 (Tx2) and South Star part no NDX-ND140APL2 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission
of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation instructions and transmitter
operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and
80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying
with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-14IAP, with antenna Inpaq part no WA-F-LB-02-120 (Tx1) & WA-F-LB-02-078 (Tx2) and South Star part no NDX-ND140APL2 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and
1.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-14IAP, with antenna Inpaq part no WA-F-LB-02-120 (Tx1) & WA-F-LB-02-078 (Tx2) and South Star part no NDX-ND140APL2 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to
demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.86W/kg and 0.91W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 320S-13IKB, with antennas B&T part no AG-041533-1314 (Tx1) & AG-041533-1313 (Tx2) and South Star part no NA133KBL1-MAIN (Tx1) & NA133KBL1-AUX (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.91W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 320S-13IKB, with antennas B&T part no AG-041533-1314 (Tx1) & AG-041533-1313 (Tx2) and South Star part no NA133KBL1-MAIN (Tx1) & NA133KBL1-AUX (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and
0.91W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 320S-13IKB, with antennas B&T part no AG-041533-1314 (Tx1) & AG-041533-1313 (Tx2) and South Star part no NA133KBL1-MAIN (Tx1) & NA133KBL1-AUX (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4
or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and
1.29W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-11IAP, with antenna HongBo part no 2602507100 (Tx1) & 2602507000 (Tx2) and South Star part no NDX-NG116-R (Tx1) & NDX-NG116-L (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.39W/kg and 1.29W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-11IAP, with antenna HongBo part no 2602507100 (Tx1) & 2602507000 (Tx2) and South Star part no NDX-NG116-R (Tx1) & NDX-NG116-L (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and
1.29W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 120S-11IAP, with antenna HongBo part no 2602507100 (Tx1) & 2602507000 (Tx2) and South Star part no NDX-NG116-R (Tx1) & NDX-NG116-L (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.53W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 720-12IKB, with antenna South Star part no 1109-02353 (Tx1) and 1109-2360 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 720-12IKB, with antenna South Star part no 1109-02353 (Tx1) and 1109-2360 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.48W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 720-12IKB, with antenna South Star part no 1109-02353 (Tx1) and 1109-2360 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.01W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 720S-13IKB, with antenna Amphenol part no AM149000C10 (Tx1 & Tx2) and Luxshare part no AM149000C00 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter
they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.89W/kg and 1.01W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 720S-13IKB, with antenna Amphenol part no AM149000C10 (Tx1 & Tx2) and Luxshare part no AM149000C00 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.16W/kg and 1.01W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number Lenovo ideapad 720S-13IKB, with antenna Amphenol part no AM149000C10 (Tx1 & Tx2) and Luxshare part no AM149000C00 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.35W/kg and 1.48W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo YOGA 520-14IKB, with antenna HighTek part no 0ACCN016019N (Tx1) & 0ACCN016020N (Tx2) and Tongda part no T-543-9021131-1 (Tx1) & T-543-9021131-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.09W/kg and 1.48W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo YOGA 520-14IKB, with antenna HighTek part no 0ACCN016019N (Tx1) & 0ACCN016020N (Tx2) and Tongda part no T-543-9021131-1 (Tx1) &
T-543-9021131-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.48W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo YOGA 520-14IKB, with antenna HighTek part no 0ACCN016019N (Tx1) & 0ACCN016020N (Tx2) and Tongda part no T-543-9021131-1 (Tx1) & T-543-9021131-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as
documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.96W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad 720S-14IKB, with antenna HighTek part no 0ACCN016017N (Tx1) & 0ACCN016018N (Tx2) and Tongda part no T-543-9021130-1 (Tx1) & T-543-9021130-2 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.37W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad MIIX 510-12ISK, with antenna South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad MIIX 510-12ISK, with antenna South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.43W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad MIIX 510-12ISK, with antenna South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad FLEX4-1130, with antenna Auden part no BAUKO1730B-M (Tx1) & BAUKO1730B-A (Tx2) and Inpaq part no WA-F-LB-02-089 (Tx1) & WA-F-LB-03-039 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad FLEX4-1130, with antenna Auden part no BAUKO1730B-M (Tx1) & BAUKO1730B-A (Tx2) and Inpaq part no WA-F-LB-02-089 (Tx1) & WA-F-LB-03-039 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.65W/kg and 1.14W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo ideapad FLEX4-1130, with antenna Auden part no BAUKO1730B-M (Tx1) & BAUKO1730B-A (Tx2) and Inpaq part no WA-F-LB-02-089 (Tx1) & WA-F-LB-03-039 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.23W/kg respectively.
This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. This grant shows the removal of the 5745-5825MHz band. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only
those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.28W/kg and 1.23W/kg respectively.
This change is for a device previously granted under rule parts of 15.247 and is now applying for approval under 15.407(b)(4)(ii) for devices with antenna gains less than 10dBi with no changes to hardware or output power. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 1.23W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P25T, with antenna Acon part no ANP6Y-100085 (Tx1), APN6Y-100086 (Tx2) and WNC part no 81EAA515.G17 (Tx1), 81EAA515.G18 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.28W/kg and 1.23W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P25T, with antenna Acon part no ANP6Y-100085 (Tx1), APN6Y-100086 (Tx2) and WNC part no 81EAA515.G17 (Tx1), 81EAA515.G18 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.23W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P25T, with antenna Acon part no ANP6Y-100085 (Tx1), APN6Y-100086 (Tx2) and WNC part no 81EAA515.G17 (Tx1), 81EAA515.G18 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.52W/kg and 0.71W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P69G, with antenna Acon part no ANP6Y-200021 (Tx1 & Tx2), WNC part no 81EAA515.G08 (Tx1 & Tx2), Acon part no ANF6Y-200003 (Tx1 & Tx2) and WNC part no 81EAA515.G09 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.97W/kg and 0.71W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P69G, with antenna Acon part no ANP6Y-200021 (Tx1 & Tx2), WNC part no 81EAA515.G08 (Tx1 & Tx2), Acon part no ANF6Y-200003 (Tx1 & Tx2) and WNC part no 81EAA515.G09 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.07W/kg and 0.71W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P69G, with antenna Acon part no ANP6Y-200021 (Tx1 & Tx2), WNC part no 81EAA515.G08 (Tx1 & Tx2), Acon part no ANF6Y-200003 (Tx1 & Tx2) and WNC part no 81EAA515.G09 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.26W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P58F, with antenna Acon part no ANP6Y-200022 (Tx1 & Tx2), WNC part no 81EAA515.G10 (Tx1 & Tx2), Acon part no ANF6Y-200004 (Tx1 & Tx2) and WNC part no 81EAA515.G11 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.81W/kg and 0.76W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P30E, with antenna Acon part no ANF6Y-200005 (Tx1 & Tx2) and WNC part no 81EAA515.G12 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.04W/kg and 0.76W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P30E, with antenna Acon part no ANF6Y-200005 (Tx1 & Tx2) and WNC part no 81EAA515.G12 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and1.26W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P58F, with antenna Acon part no ANP6Y-200022 (Tx1 & Tx2), WNC part no 81EAA515.G10 (Tx1 & Tx2), Acon part no ANF6Y-200004 (Tx1 & Tx2) and WNC part no 81EAA515.G11 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous 0.31W/kg and 0.76W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P30E, with antenna Acon part no ANF6Y-200005 (Tx1 & Tx2) and WNC part no 81EAA515.G12 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 1.26W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P58F, with antenna Acon part no ANP6Y-200022 (Tx1 & Tx2), WNC part no 81EAA515.G10 (Tx1 & Tx2), Acon part no ANF6Y-200004 (Tx1 & Tx2) and WNC part no 81EAA515.G11 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.05W/kg and 1.32W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 710-11ISK, with antenna Honglin part no DC33001F000 (Tx1) & part no DC33001F010 (Tx2), Speedwire part no DC33001F300 (Tx1) & part no DC33001F310 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.27W/kg and 1.32W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 710-11ISK, with antenna Honglin part no DC33001F000 (Tx1) & part no DC33001F010 (Tx2), Speedwire part no DC33001F300 (Tx1) & part no DC33001F310 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous 0.39W/kg and 1.32W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Lenovo Yoga 710-11ISK, with antenna Honglin part no DC33001F000 (Tx1) & part no DC33001F010 (Tx2), Speedwire part no DC33001F300 (Tx1) & part no DC33001F310 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.01W/kg and 1.12W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00066C PC with Tongda (DQ690210902 & DQ690210903) and WNC(DQ6G15G9100 and DQ6G15G9200) antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.12W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00066C PC with Tongda (DQ690210902 & DQ690210903) and WNC(DQ6G15G9100 and DQ6G15G9200) antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.46W/kg and
1.12W/kg respectively.
This change establishes portable category SAR conditions for the Lenovo model TP00066C PC with Tongda (DQ690210902 & DQ690210903) and WNC(DQ6G15G9100 and DQ6G15G9200) antennas.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client
only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.07W/kg and 0.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Yoga 700-14ISK, with antenna HongLin part no DC33001DB00 (Tx1) and part no DC33001DB10 (Tx2) and Luxshare part no DC33001D900 (Tx1) and part no DC33001D910 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR are 0.44W/kg and 0.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Yoga 700-14ISK, with antenna HongLin part no DC33001DB00 (Tx1) and part no DC33001DB10 (Tx2) and Luxshare part no DC33001D900 (Tx1) and part no DC33001D910 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.03W/kg and 0.47W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Yoga 700-14ISK, with antenna HongLin part no DC33001DB00 (Tx1) and part no DC33001DB10 (Tx2) and Luxshare part no DC33001D900 (Tx1) and
part no DC33001D910 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this
filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band
operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.50W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Y700-15, with antenna Speedwire part no DC33001DU00 (Tx1) and DC33001DU10 (Tx2) and Yageo part no DC33001DX00 (Tx1) and DC33001DX10 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.01W/kg and 0.32W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Y700-15, with antenna Speedwire part no DC33001DU00 (Tx1) and DC33001DU10 (Tx2) and Yageo part no DC33001DX00 (Tx1) and DC33001DX10 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR are 0.25W/kg and 0.32W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: Y700-15, with antenna Speedwire part no DC33001DU00 (Tx1) and DC33001DU10 (Tx2) and Yageo part no DC33001DX00 (Tx1) and DC33001DX10 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.50W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P55F, with antenna WNC part no 81EAAZ15.G19 (Tx1 & Tx2) and ACON part no AMM8P-700038 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this
filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band
operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR value is 0.65W/kg.
This change is to request approval for portable category specific host tablet PC, Dell model number: P57G, with antenna WNC part no 81EAAX15.G25 (Tx1 & Tx2) and ACON part no APP6Y-700119 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body SAR is 1.37W/kg.
This change is to request approval for portable category specific host tablet PC, Dell model number: P57G, with antenna WNC part no 81EAAX15.G25 (Tx1 & Tx2) and ACON part no APP6Y-700119 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.01W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P55F, with antenna WNC part no 81EAAZ15.G19 (Tx1 & Tx2) and ACON part no AMM8P-700038 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body SAR value is 0.01W/kg.
This change is to request approval for portable category specific host tablet PC, Dell model number: P57G, with antenna WNC part no 81EAAX15.G25 (Tx1 & Tx2) and ACON part no APP6Y-700119 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band
operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR are 0.87W/kg and 1.45W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number: P55F, with antenna WNC part no 81EAAZ15.G19 (Tx1 & Tx2) and ACON part no AMM8P-700038 (Tx1 & Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device
is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.20W/kg and 0.40W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1480, with antenna HighTek part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values are 0.01W/kg and 0.40W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1480, with antenna HighTek part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR are 0.39W/kg and 0.40W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1480, with antenna HighTek part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217
Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and
80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 0.23W/kg and 1.02W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1580, with antenna HighTek and WNC part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
The highest reported SAR values are Body and Simultaneous SAR: 1.01W/kg and 1.02W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1580, with antenna HighTek and WNC part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values: 0.01W/kg and 1.02W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Lenovo model number: FLEX3-1580, with antenna HighTek and WNC part no 025.900CR.0001 (Tx1) and 025.900CS.0001 (Tx2).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 0.82W/kg and 0.83W/kg respectively.
Additional Chassis added, model number: P20T, with the following antenna options: Option 1: Acon, P/N APP6Y-701144 (Tx1 & Tx2). Option 2: WNC, P/N 81EAAX15.G01 (Tx1 & Tx2). |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values: 0.01W/kg and 0.83W/kg respectively.
Additional Chassis added, model number: P20T, with the following antenna options:
Option 1: Acon, P/N APP6Y-701144 (Tx1 & Tx2). Option 2: WNC, P/N 81EAAX15.G01 (Tx1 & Tx2). |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device must utilize the BIOS Locking features as documented in this filing. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 0.44W/kg and 0.83W/kg respectively.
Additional Chassis added, model number: P20T, with the following antenna options: Option 1: Acon, P/N APP6Y-701144 (Tx1 & Tx2). Option 2: WNC, P/N 81EAAX15.G01 (Tx1 & Tx2). |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must used in a mobile configuration in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and
installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This change is to request approval for a dipole type antenna Wieson Technologies part number GY121HT0321-003-H. This dipole antenna will be restricted to mobile category or desktop host systems. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must be used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configuration and only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrators must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product.
This change is to request approval for a dipole type antenna Wieson Technologies part number GY121HT0321-003-H. This dipole antenna will be restricted to mobile category or desktop host systems. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. This module is approved in mobile configurations and only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This change is to request approval for a dipole type antenna Wieson Technologies part number GY121HT0321-003-H. This dipole antenna will be restricted to mobile category or desktop host systems. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application.
Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must also utilize the BIOS locking features as documented in this filing. OEM/Host integrators must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 0.75W/kg and
0.80W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values: 0.01W/kg and 0.79W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application.
OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4GHz and 5GHz bands of operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as
described in this filing. This device must also utilize the BIOS locking features as documented in the filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR:
0.79W/kg and 0.80W/kg respectively.
This change is to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Body and Simultaneous SAR values: 0.13W/kg and 0.92W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must also utilize the BIOS locking features as documented in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy
RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 0.79W/kg and 0.92W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for 2.4GHz and 5GHz bands of operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. This device must also utilize the BIOS locking features as documented in the filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR: 0.55W/kg and 0.92W/kg respectively. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
various
|
DEKRA Testing and Certification, S.A.U.
|
various
|
Intel Mobile Commmunications France S.A.S.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Name |
N******** A****
|
various
|
F**** C******
|
various
|
N****** A******
|
various
|
S******** H********
|
various
|
Telephone Number |
00334********
|
various
|
34-95********
|
various
|
00334********
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
00334********
|
various
|
34-95********
|
various
|
886-2********
|
various
|
E-mail |
n******@intel.com
|
various
|
f******@dekra.com
|
various
|
s******@quietek.com
|
|